I have a frontpanel PCB (the one that contains all the displays and other stuff) from a 8665B the same board can be used on the 8664 as well as the 8643/44...
Thanks to a couple of different list members for the loan of the hard copy original manuals, Artekmedia now has PDF service manual scans available for the...
Dave HP recently started uploading clips on their website, i dont know if they got the 4401 on there but they have the 8590 series and also 53131/32 and 181...
Plus our schematics are MUCH BETTER QUALITY...you can read about 75% of the values and reference designators in their 8590A clip which appears to have taken...
the good news is that agilent finally seems to get a little more service oriented by publishing those, i agree that the quality of some of the manuals is not...
unfortunatly with the 4401 as well as with many other late model stuff the schematics are only a dime on a dollar, even with schematics servicing those is a...
My late dad was a test engineer and has a lot of old equipment, including an HP 130B oscilloscope, down in his workshop. I'm trying to get the house ready for...
Subject says it all. I've got a pristine 8565A that works perfectly when driving an oscilloscope hooked up to its X-Y outputs, but the internal CRT is...
stan i would look into older XY storage displays (13xx series) which might use the same CRT, as far as the 1340 CRT, there are two sides to it , mechanical and...
First, I'd like to thank everyone for all of the helpful advice. Based on information I've gotten on- and off-list, and by doing my own research, I found that...
... Another thing worth trying is to get an 8750a digitiser ( normaliser they called them) and use that to drive a normal cro. These boxes take the output from...
stan i dont mean to discourage you but the CRT is in fact one of the achilles heels of the 8565A so finding one with a good CRT is gonna be a tough one ,...
Hi Lothar, Actually, the 8565A is a “back burner” project, so *if* there’s a good CRT for it out there somewhere, I can wait. I certainly appreciate your...
hp back then was big on design reuse, so there are alot of parallels between the 8559, 8565 and 8569 series, storage CRTS always have seem to be more...
This scope comes with 3 hardcover manuals (Operators, programming, and service) and also comes with two 500MHz HP 10441A probes. This is unit was well cared...
A working HP 8478B Thermistor Mount for $ 100, has APC-7 and N adapter. a 5 foot cable for the mount/meter for $ 30, a 10 foot cable for the mount/meter $ 40. ...
I have posted a big list of mostly test equipment on the list indicated below...I promised I would not bother you guys here...if interested you can look there....
Have the following ORIGINAL (not PDF's) manuals available prices do not include delivery ( method of your choice) HP 3480A/B DVM (Operator /Service)...
120-B---scope 130 printer--- mechinism 130C---scope 196-A---scope camera xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx do you have an old H / P 200...
this is a real neat book . dated 1965 its about 100 pages . its called application note 52 . it refers to models ; 106 , 107 , 115 , 117 , 120-A , 175 , 724 &...
