How closely does a thirdparty AVR-based controller need to mimic the Intellibrain in order for a purchased copy of RoboJDE to meaningfully run on it...
RoboJDE supports the following controllers: - IntelliBrain (www.ridgesoft.com) - Handy Board (www.handyboard.com) - Sumo11 (www.1socrc.com) We do not recommend...
Hi, I'm using an RC car as the basis for a robot. The steering uses a standard servo and it works fine plugged in the IB. The motor controller acts like a...
Actually, having done some more research, the problem is actually the reverse of what I originally said. The motor controller has a BEC so that it is back...
WJR, The BEC regulator will be reverse biased with the IntelliBrain turned on. The IntelliBrain regulator delivers 6V to the servo power pins. This might...
Thanks. I removed the red wire from the molex plug and the motor worked although I don't think that it went into reverse (unloaded the thing runs really fast...
WJR, The current will run back through the servo fuse to the switched battery power. The power switch will not do anything. If you have an expansion board,...
Hello, When we try to use any method of the Motor2 class we get an UnsatisfiedLinkError exception. Can you tell us what might be the problem? Thank you in...
Carlos, It maybe that you have a mixture of classes built with versions 1.3 and 1.4. Make sure all of the classes were built with version 1.4 of RoboJDE, with...
Never mind -- looks like the problem was that I had an external I2C slave hooked to the I2C 3 connector, which for some reason prevented the bootstap routines...
So I've been able to successfully download to flash many times before. Tonight, though, the Intellibrain refuses to enter bootstrap mode. I've tried many...
RidgeSoft has recently added the an ultrasonic range sensor kit to its product line. For more information see: http://www.ridgesoft.com/shop.htm#PingSensorKit ...
Hi. First time posting. I have a robot that's going to need some sort of behavior arbitration. I'm going to try to use the behavior arbiter, but I am not sure...
I was working with the IntelliBrain board at the 38400 rate (I did have a couple times when it had an error when verifying a load to FLASH) that was working....
First, I'm going to apologize in advance because I am going to contradict material that I have gotten from RidgeSoft. If anyone wants to flame me, go ahead but...
My task is to program a robot to slalom around two different colored cups. The cups are blue and yellow, but which is in front and which is in back is a...
Most of WJR's comments below are good, however, there are a few differences in how the RoboJDE BehaviorArbiter is designed to work and what WJR describes. The...
First, you need to be more specific in the algorithm. You've written one that a human can understand. But you are trying to get a bot to understand it and it...
I've been experimenting with ways to easily switch back and forth between Eclipse and RoboJDE. I have two separate folders for one project, and I am having to...
Hello, this is my first post so I wanted to say hello and thanks for having a nice community for support. Would anyone know if there is a way to force a power...
I wasnt sure if your community minded about multiple questions per-post so I decided to make another post for a different topic. Has anybody heard news of...
Would there be a way other than modifying the hardware to automatically run a program when the bot turns on? Without having to push the start button of course....
I can confirm that IOGEAR's "Bluetooth Serial Adapter" Product ID GBS301 works with the bot, with some hardware modification. Problems: The bluetooth device...
Can anyone fill me in on a good location/mounting configuration for the Devantech CMPS03 digital compass?. I have seen a mast that is available, but this puts...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
