You run iRMX for DOS on a PC, not your target system. We are in the same situation here. You use these tools on your PC to create 8086 or 80286 compatible...
404
Cliff Lardin
calardin
Feb 13, 2009 4:01 pm
Ah, I see, thanks Julie. I am trying to set up something similar using my older iRMX II system, which doesn't even have physical drivers for DOS partitions...
405
iRMX Stuff
iRMXStuff
Feb 13, 2009 8:40 pm
Hi Cliff, I spoke with one of my contacts at TenAsys and he said they do sell a DOS-hosted OMF86_286 Development Kit which has all the OMF 86 and 286 tools...
406
Cliff Lardin
calardin
Feb 13, 2009 8:51 pm
Hi Rich, Many thanks. I will ask them again, this time, being specific. Best, Cliff ... From: iRMX Stuff <irmxstuff@...> Subject: Re: [irmxstuff] iRMX...
407
Robert Dunn
robert_d1968
Jun 18, 2009 11:29 am
I have a machine that uses the IRMX software. This uses DOS 6.22 The pc is set to boot fromm dos and then load irmx with a command set in the autoexec.bat...
408
robert_d1968
Jun 18, 2009 11:29 am
I have a machine that uses the IRMX software. This uses DOS 6.22 The pc is set to boot from dos and then load irmx with a command set in the autoexec.bat file...
409
William.Calvert@...
william_calvert
Jun 18, 2009 11:15 pm
Robert, If this doesn't work, let me know and I'll check further. Since you created two DOS partitions they should be partitions 1 and two (hda1 and hda2), so...
410
robert_d1968
Jun 19, 2009 12:09 pm
Bill, Thanks for the information... I did try a couple of days ago to attach it as Hda3 but not exactly like you have attached it... "ad hda3 as hda3 n" I...
411
William.Calvert@...
william_calvert
Jun 19, 2009 3:15 pm
Robert, The book says that if you don't specify the device format, named or physical, when you format the device, it will be formatted in the format used when...
412
robert_d1968
Jun 20, 2009 11:40 am
Bill, I tried last night to attach the partition as hda3 using the "ad hda3 as hda3 n" It replied with no such command found... I'm using version 2.2, when...
413
robert_d1968
Jun 20, 2009 11:41 am
I'm not sure if this is part of the IRMX software. But thought I should ask about it. The job that is running in the Irmx software Keeps putting up an error ...
414
mafalk62
Jun 22, 2009 7:28 am
To my knowledge, this is not part of the RMX OS....
415
mafalk62
Jun 22, 2009 7:50 am
Robert, I've had a look at the DOSRMX ICU file and there I have found the following drives: RMX: C_RMX (5), C_RMX0 (0), C_RMX1 (1), C_RMX2 (2), C_RMX3 (3) and...
416
Richard N Carver
Richard.Carver@...
Jun 22, 2009 3:09 pm
If you are using INtime with the iRMX Addon it may require a Sentinel Key. I believe it was sometime after INtime v2.3, maybe with INtime v3, that they started...
417
William.Calvert@...
william_calvert
Jun 23, 2009 7:01 pm
Robert, I think Martin is right. I was thinking about version 2.3 and not iRMX for windows. According to my iRMX 2.2 commands manual, I think the duib for...
418
robert_d1968
Jun 24, 2009 2:32 am
Ok, I I did an Attachdevice c_rmx3 as C_rmx3 It attached successfully. I then formatted it as named. I then restored the job files from a floppy drive... I...
419
robert_d1968
Jun 26, 2009 12:36 am
Hi there agian, I have a tempsonic board (8 channel) that is in use in the Irmx operating system. The program that runs this board reports a board fault, but...
420
soofia
soofia4contact
Feb 15, 2010 1:44 pm
Hello i want to know whether INTIME 3.0 supports code in PL/M as supported by older versions of iRmx? Kindly let me know at earliest....
421
iRMXStuff
Feb 28, 2010 12:28 pm
The iRMX For Windows add-on for INtime 3 ( http://tenasys.com/products/irmx_windows.php ) supports the 386 development tools including PL/M. We continued to...
422
alex.joni
Apr 20, 2010 2:50 pm
Hello everyone (new to this group), I have some older robot controllers running iRMX III and wanted to make a backup of the programs available on floppies. ...
423
Richard N Carver
Richard.Carver@...
Apr 20, 2010 2:52 pm
Hi Alex, Unfortunately I don't use iRMX anymore so I can provide limited help. Is this the rmxdisk.exe that was written for DOS? Is there a date and/or version...
424
soofia
soofia4contact
Jun 14, 2010 10:47 am
Hi everbody! i am working on INTIME 3.0 and want to know the function to find global/system time ( as rq_get_global_time() in older irmx). any body knows ,...
425
soofia
soofia4contact
Jun 22, 2010 6:53 am
Hi! i m usimg INtime 3.0 and dealing real time data of 4500 bytes every 2 seconds. i m trying text files to store data but the size exceeds 500 MB in 24...
426
RuudSchramp
Sep 24, 2010 2:47 pm
Hi All, Can anyone provide me with a reference IRMX floppy that can be read with the tooling in the files section? Does anyone have tooling available to...
427
voodini2001
Oct 14, 2010 5:27 pm
I've got RMXIII (dosrmx) running in a vmware virtual machine (using vmware player) - this is because i'm not sure how long the old pc it was originally on will...
428
Cliff Lardin
calardin
Apr 5, 2011 8:35 pm
Hi Alex, I realize I am nearly a year late in response, but I have not looked at this group in some months. Â My apologies. That said, I do have recent...
429
alex.joni
May 18, 2011 5:34 pm
Hi Cliff, thanks for the reply. Are you sure we are talking about the same rmxdisk? The one I found is called "RMXDisk_v0.0.1.100.zip" and it appears to be a...
430
Cliff Lardin
calardin
Sep 23, 2011 12:13 am
Alex, I am going to have to forward this Yahoo mail account back to another one...I don't check here nearly often enough! Yes, I have a DOS-only RMXDISK app...
431
Bogdan
love4boobies
Oct 21, 2011 12:46 pm
Hi, I'm interested in ASM386 X4.17 (see http://www.tenasys.com/products/omf386.php ). Does anyone have any idea how to purchase it? I couldn't find anything on...
432
soofia
soofia4contact
Feb 22, 2012 10:06 am
can anyone tell me the price of INtime Ver 3.0 with run time license only???...
