I new to this stuff so please bare with me. :) I have a JVC DVD player and a 15-1994. Built the JP1, works great. The only setup code for the JVC (built in)...
... km has been programmed for the RCU810 for a long time, what problems are you having with it? You do have to be aware that km uses standard names for the...
If I remember correctly, and John Fine can clarify this, modern JVC remotes actually send two slightly different signals, one in the old JVC format and one in...
I need help, I just bought the 2104 and rebuilt my simple cable and triple checked it, but i cannot communicate keep getting a header read failed error. Any...
... Then "backwards" is forwards (you had it backwards before). You need a new RDF file for the 2104 which you can get from the Files area in this group....
I've been trying to get my URC9800 working with the Dish 3 and 4 addresses, got 1 and 2 working without a problem. I've generated an upgrade for the 3 and 4...
What are you doing to change the unit code each time? It's been a while since I've had to think about the old Dishplayers but if I remember correctly, all you...
Just FYI, Seeing as how John has started writing extenders, and Scott might be doing one for the Producer 8 soon, I have created a new folder just for ...
... What happens when you click on the file name in the rdf folder? When i click on it, I get a dialogue box that gives me the option of opening it or saving...
Thanks rob, I have the right file, I think there is a compatibility issue with the 2104 and the simple interface. Not reallu sure but read another post with...
I have a JVC XV-511 DVD and I use code 0558 also (I used an advanced codes list for a XV-501). It uses device code 239. For my future buying reference, what...
... The Radio Shack 15-2104 will work with the simple interface. Try a different computer, removing the batteries, replacing one battery with a jumper or...
image 6 on the jp1 interface kit intsructions is the resistor in cup 4 with the yellow wire is it the reverse postion to cup 3. I cant really tell from image...
First let me id myself as Paul from New York, since I don't remember having to use my skater alias when I posted here before. I just got an APEX 5131 and I'm...
hey all, in my previous post, "retrieving learned codes," i learned that my producer 8 has some shortcoming when compared to the cinema 7 and the 15-1994. i...
I'd like to set a macro to turn on my cable box and my TV at the same time. However when I set the power button to do this, I couldn't use it for anything...
Macros are global, which means once you program a macro to a button, it will be active in all device modes. The most common work around for this is to program...
... The other work around is to do a key move (advanced code) on that botton for every device for which you DON'T want the macro to apply. In the example in...
I setup the 1s,2s,3s,and 4s buttons to shift to different configurations and come back to a common starting point using the shifted 1s,2s,3s,and 4s buttons....
Apparently the check interface is enough to cycle the reset line using my simple interface--after I run it with the remote powered, I get the LED programming...
I tried the Dev2 code that doesn't seem to work. I calculated the EFC using some info I found in older messages. Addr 2 EFC's = Addr 1 + 16, Addr 3 = Addr 1...
Not sure what model JVC DVD player you have, but I have one of the new XV-FA90BK's and it uses UEIC setup code 0623 (that's 0640 for a RCU-810). ... I have a...
I'm an extreme newbie, i'm trying to create a device code (modified VCR set-up 0046) for the 15-2104. I just noticed in the device listing that the +100 key is...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
