Hey guys, I just got my k-3 from Ukraine I think. I didn't get any film with it, but I hit the trigger and it worked fine, was happy etc. But I ran it on...
Well, for starters, if you've read any books, your not supposed to run cameras at higher than 24 fps without FILM. That being said . . . "Q: My K-3 doesn't...
My K-3 has a slight, well actually major, problem in that the the shaft of the gear that drives the main driving sprocket is slightly bent. This makes the...
I need some help guys. Several months ago, I took a perfectly working K-3 apart so I could check out the drive mechanism, well i got side tracked, and here i...
... You have to carefully set the pawls in their proper place, and then hold them there using something like a thick grease, then set the interior into place...
... hold ... Thanks, I got it back together not long after the first post, but thanks for the help. What I ended up doing was, removing the gear that the pawls...
Hey guys, Did my first K3 shoot over the weekend (birds at a local wildlife reserve) and got the processed film back yesterday. It was essentially a scratch...
... The lens cap works pretty well. Some people say you need to plug the eyepiece too but I have not noticed any light leakage from there. Mike...
Mike Friese
Mike@...
Oct 23, 2003 1:55 am
2519
Problem with the lens cap is you can jostle the camera out of position while you're screwing it on. Even if you get a snap-on replacement, I would imagine you...
hello all, i'm looking into buying a k3 off of ebay for a first time independant film i'm looking into doing, and boy do i have questions question questions ok...
... A: 16mm film is either developed into negatives then you make prints from those negatives, or "reversal" 16mm film is made straight into a one-time-only...
... I believe I have the last two brand-new K-3 motors in existence (purchased from Tobin's last production run). Anyway, they're certainly the last two I know...
ok now that i have that info i have other questions, i've opted not to go with the k3, the main reason being the k3, so my other question would be can anyone...
Auricon, it is heavy and does not have reflex view finder but it does have sync, good lens options and can be barneyed. Otherwise rent. Daniel ... From:...
Yocum Daniel R Civ 21...
daniel.yocum@...
Nov 18, 2003 9:00 pm
2525
... Yeah, that's a major turn-off. And, the 25 fps is "nominal", too, as the motor doesn't have a phase-locked loop, per se, but a true proportional feedback...
... Slow Motion, Inc. is supposed to be able to convert the Kinor to the 24 FPS crystal sinc mode. http://slowmotioninc.com/ I also got a quote from Anders...
(no author)
(no email address)
Nov 19, 2003 12:16 am
2527
... An Auricon is sync only when driven from a frequency-controlled source, such as a standard ac wall socket or a Carter-type rotary converter (Auricon...
I've got a motorized K-3 but haven't touched it in perhaps 4 years. The 12 volt battery seems to be taking a charge, but when I connect it and try to run the...
Thanks very much! I'll look into a DC power supply. Best, MDC ... just for such ... the type ... excellent "battery eliminators". ... and could ... which is ...
Hi all - I've got a project I need to shoot on an animation stand- like device so my k3 will be pointing face down, and I'd like to run it at a slow frame...
I'm not familiar with this problem; what can I do/should I avoid to help prevent this? thanks EH ... ===== 67th Street Editorial Hours: Monday and Tuesday 9 -...
cap your lens and eye piece between each shot. ... From: Erik Hammen To: k-3@yahoogroups.com Sent: Wednesday, December 03, 2003 1:29 PM Subject: Re: [k-3] slow...
... Since the silvering on a rotating mirror shutter is not 100 percent opaque, and since the light path around the mirror itself is not necessarily light...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
