http://www.mige.org/TTConv.zip New utility for add 2 Pcb. Nets and references of second pcb is automatic changed with add "Pcb2-" Future utility is a manual :)...
no, I have the same problem! when will be out a new release of kicad that corrects some bugs? hi leo __________________________________________________ Do You...
All right, I've reduced this matter to 3 warnings. In a 4-layer pcb with a microprocessor with 176 pins it's not a bad thing. Nevertheless, putting a Power...
... Hi, It is very probably that is OK. An other solution, could be to create a special footprint component with only a pad which is connected on the right...
Thanks Danilo. Looking at the gerbers it seems that connecting tracks to vias works well. I have two inner power layers (ground and power) and sometimes I want...
Hi, I'm a new user of kicad (I've been using Layo1EE (dos version)for many years) : un grand bravo à J.P Charras !!! I'm looking for a laser printer which...
... Hi, I think that a poscript model can be a little best, because you can use it on Linux as well on Windows. Kicad permit to output the post process ...
... PCL or such (i.e., a properly documented language, not GDI) often actually works better, because your PC will be a lot faster than the processor in the...
Werner Almesberger
werner@...
Nov 6, 2006 10:22 pm
1308
Thanks to Danilo and Werner for those answers. Any advice for a printer with a good paper transport ? Vincent Le Mieux...
Hello ALL! Jean or any another friend can explicit the all parameters in command line to draw arc in library file of modules? I attempt make an utilite to...
FWIW I've used an old HP4000 laser printer to make one-off pcbs for some years. The accuracy and paper handling have been good enough for me to make one-off...
Subject says it all... I'd like to have component names (R1 etc) in the gerber data for the copper layer. It would save me the silk screen. How can this be...
My PCB manufacturer is complaining that the PCB outline (as I drew on hte Edges Pcb layer) appears in all the Gerber files - whereas it should only appear in...
You should draw the board outline in another layer (for example drawings layer) becouse if ou drae anything in the PCB outline layer, it will appear in every...
THanks for this information Best regards, V.Le Mieux ... From: "GAJDA" <christian.gajda@...> To: <kicad-users@yahoogroups.com> Sent: Wednesday, November...
... The use of toner as etch resist. Better known as "toner transfer". This site is the canonical reference for it: http://www.fullnet.com/u/tomg/gooteepc.htm ...
Werner Almesberger
werner@...
Nov 8, 2006 4:02 pm
1321
... many ... for ... Here's a link to a Yahoo group that deals specifically with these questions: http://tech.groups.yahoo.com/group/Homebrew_PCBs/ It's a...
... I'm using an ages old HP LJ-III for toner transfer, works just fine with kicad. I haven't tried it but I know it can be set up just as easily in Linux and ...
... Hmm, are you printing on an entire sheet of transfer paper at a time ? You can safe a lot of transfer paper (which may be expensive, depending on what sort...
Werner Almesberger
werner@...
Nov 8, 2006 9:17 pm
1324
Hi, Take a look to Kicad Help. There is a section for 'File format' (lib, mod). Exists at least in french release. Charles....
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the kicad-users group. File : /Robwor...
kicad-users@yahoogrou...
Nov 9, 2006 7:20 pm
1328
Hi, I would like to know if it's possible to change a symbol in EeSchema with an updated version. I've currently a schematic with some tens of switches and...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
