Hi, I built a dual cable, a state-based circuit (figure 4) which works very well with my coolpix 995 but I would like to build a relay- based circuit (figure...
Hi, Any miniature 5V DPDT (double pole-double throw) relay will work, provided its power consumption isn't very high, i.e. a 5V/25mA; better ask your parts...
latest test version tried with coolpix 4500, standard USB cable. there are three problems/comments 1) I would like to use the "preset" white balance. No such...
Hi bohemyan, 1) Preset WB: I overlooked that setting, sorry. I'll add support for it in the next version. You'll have to do whitepoint measurement manually,...
... No random download problems with the 1.03 version, just the isuues mentioned in my previous post (file naming), but I did not test it extensively....
hi. i have used krinnicam and it works fine, downloads and all. Now i am trying to do my own implwmentation and it works ok. But i have problems with getting...
... It seem your case it's rare :-P ... Congratulations! Do you plan to upload it to the internet? ... code ... Crosser. ... Same sources for krinnicam (I also...
... Not unless its gets stable. right now it is hardly working :) ... I dont have access to win98 so i have no idea. ... I tried the both second and third....
Dear all, I'm writing usb driver for windows based on Bluetooth usb specification. I'm new for this. I could get idea to start the code. Could you please send...
speektonagaraj
speektonagaraj@...
Mar 16, 2004 8:29 am
186
... Hi again Wayne, well I meant this two options: #1. Use the USB mass storage feature of the camera. This one's implemented in krinnicam. As this feature...
I guess you'll have to get Microsoft DDK (Device driver Development Kit) and read tons of msdn docs. I've never developed anything similar. Good luck! ...
Hi, Aristarco, Recently I set up a CP4500 system with microscope, I also hooked up the TV-out from the camera to the computer. I used a TV tuner card on the...
I'm afraid I can't provide you with a solution. Unfortunately this is the way that the camera behaves, and I think I can't change it at all by just issuing...
Sorry, I forgot to mention that the TV-out function works if you control your camera through a serial connection (Nikon SC-EW3 cable). Aristarco ... on ... ...
Sorry, I don't know any commercial sources for the dual cable. Probably there isn't and won't be any, I suppose... Regarding the use of the camera under serial...
Dear users, and dear aristarco, im proposing you a modify in your very useful program: in many cameras, as in my coolpix 995, there is the possibility to use...
Ciao Gatto Mannaro, I tested a wonderfull program that allows to fully control the Nikon990 with the USB cable (and serial cable), it's PhotoPC (there's also a...
Hi Gatto Mannaro, unfortunately, multiple shot and movie mode are not supported through USB (I tried to change to these modes using the code values that some ...
Hi Francesco, I guess you refer to John Bowman's variation of photopc, which supports USB on the CP990. Unfortunately, it doesn't work with the CP995 and newer...
Hi, We have been using the cp4000 mounted on a microscope and controlled by John Bowman's photopc (under Linux) via the serial cable. Generally it works quite...
Hi Stan, (answers below) ... controlled ... [...] ... preset ... the ... I work with the same information that you have: Eugene Crosser's description of the...
Hello, Just a littel question : Does exist the same software, but to MacOS and the collpix 3200 ? Thank you for your answer. Sincerly Alain (from France,...
Alain LEBOULANGER
aleboula@...
Mar 29, 2004 1:27 pm
204
Hi Aristarco, ... to ... command? Sorry for the mistake: It was the command 2, code 6, argument 3 (calibrate white balance) see protocol description at ...
Hi Aristarco, I just noticed an odd phenomenon when using the Sierra protocol (John Bowman's photopc software) to control Coolpix 4500. It is related to file...