...managed to get Krinnicam to take pictures faster than one every 3.5 seconds? It seems to be metering and focusing in that time, but when I set it to one of...
Hello, I just found your great program to control nikon coolpix via USB and I downloaded version 1.04 and 1.05 Unfortunately, when a launch the program and...
Hi Jose, (I assume that the memory card is already formatted) I have previous reports about this problem and I really don't know where the problem may be. I...
Thanks for your fast answer,dear Aristarco. I have now the following situation: with your patch "krinnicam_joseleruse.exe", and the text file with "4300" in...
Thanks for your fast answer,dear Aristarco. I have now the following situation: with your patch "krinnicam_joseleruse.exe", and the text file with "4300" in...
Is there anything on the log file after the crash? I could get a better picture of what's going on. Nevertheless, since you can read the "Vendor/vendor Name :...
Dear Aristarco, I ran your test program as you suggested. It didn't crash. I ran 2 cases : one without the txt file ("4300") (see log1.zip) and once with this...
Hi Jose, first of all thank you for your perseverance. kscan results seems ok. It seems that CP4300s don't create a "nikon100" folder when the CF card is...
I had this project in mind for some time now. I have almost no time for anything, but by making the most of some brief moments of spare time, I have been...
hello aristarco, i've interested with the project u just builded. That's great idea to use pic to control the shutter of camera. In this poject we just control...
Hi tomy, I'm not sure to fully understand what you said in your message, sorry. What I plan to build is a simple replacement for a Nikon MC-EU1 (or equivalent)...
hi all, I'm working on a project to electronically focus / zoom / shoot and Coolpix 5900. The coolpix will be up in a kite and some R/C switch will be used to...
Has the video out problem with CP4500 been fixed? I'm running v1.06 and I'm the video-out signal is turned off when Krinnicam has control. Any input is useful....
hi everyone. Thanks for this awesome program. I have a Nikon CoolPix 8800. I was using krinnicam on a windows 2000 computer and it worked quite well. I was...
Hello, I have a CP4500 camera connected by USB cable to a computer running Windows XP Pro. If I start krinnicam (v. 1.05 tortoise) when the camera has been...
I've just tried versions 1.3, 1.4, and 1.6 and in all cases running the krinnicam.exe program causes the PC to lock up to the point of having to power off...
Hi everybody, first of all sorry for the long delay in replying some posts. I'm back again and, as always, I'll try to help. Surely you have noticed that the...
Hi emiel, sorry for the long delay. I'm not sure about the Coolpix 5900, but almost every coolpix needs a communications protocol over the USB (or serial)...
Thanks for the info. I'm not sure if you have noticed that krinnicam still tries to control the camera even when it cannot recognize the camera. Have you tried...
Dwayne, first of all I apologize for the long delay. Unfortunately, it seems that there isn't any way to enable the video preview when the camera is being...
hi krinnicam list, there have been questions to the list a while ago if it's also possible under mac os x to control a digital camera. good news: with the...
Hi blakelock, ... if you send me some of the "resolution codes" (and the resolution and quality modes they represent, e.g., "3264x2448/Fine") that krinnicam ...
Hi Gadi, first of all, sorry for the long delay. There are a few reports on bad behaviour on win xp, but you added a new bit of information: startup order...
Hi Jim, I've received some reports regarding communication errors, even some crashes under certain circumstances, but never a lockup. I admit I'm puzzled. Your...
Hi Aristarco, I've tried xppro-test. Everything works right. The content of the log file is as follows: Open log: 2005-09-20 11:29:16.500 11:29:16.500 Run:...
These are good news, but on the other hand, we must wait for the next krinnicam major release (2.0) to get the problem solved on the application (this is...
I need to be able to set the focus point on a coolpix 4500 in order to do depth of field (DOF) stacking. Ideally, I'd like to be able to set the focus in 1mm...
Unfortunately, krinnicam cannot control the focus setting beyond simply changing the mode (auto, macro, infinity). AFAIK, no one (outside Nikon) knows how to...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
