Dell/Linux users: I contacted Dell today to find out the cost and manner by which an I8000 with just the modem board in it can be upgrade to be inclusive of...
3001
jsc3@...
Mar 1, 2001 2:20 pm
I might point out that is far cheaper than any "Realport" modem/Ethernet CardBus combo card you are likely to find, that it doesn't require working PCMCIA to...
3002
idharper@...
Mar 1, 2001 4:00 pm
Has anyone any experience of installing this ? I am trying but it locks up when it comes to the point of selecting the language !! Ian...
3003
Timothy R. Butler
kde@...
Mar 1, 2001 4:46 pm
Hi everyone, This is a bit Off-Topic, but I was hoping someone on this list might have an idea. I have a weird TrueType font problem. When I had SuSE 6.1...
3004
will.irwin@...
Mar 1, 2001 6:36 pm
It depends whether the machine starts up with the Windows boot loader or goes directly into LILO. I have mine set up where the Windows boot loader offers the...
3005
Philip P. Dixon
subscriptions@...
Mar 1, 2001 8:00 pm
If you want to keep the Windows boot loader intact, the option I use is: Configure lilo to install itself into /boot, /dev/hda3 on my machine. I only put one...
3006
guroos
guroos@...
Mar 1, 2001 11:09 pm
IT WORKED ! Thanks ! ! ! -Linc ... From: Philip P. Dixon To: linux-dell-laptops@yahoogroups.com Sent: Thursday, March 01, 2001 3:00 PM Subject: Re:...
3007
Phil Dixon
subscriptions@...
Mar 2, 2001 3:56 am
You're welcome. Also, if you aren't constantly building new kernels or changing your linux boot configuration, you can uninstall the lilo rpm from the machine...
3008
Timothy R. Butler
tbutler@...
Mar 2, 2001 5:28 am
Hi everyone, I know that those on this list probably use their laptops a lot, so I was just curious if you had an answer to this question. If you use a laptop...
3009
cavallo@...
Mar 2, 2001 6:58 pm
Hi there, thanx to your help I've now a running i8k RH7.0 and a freshly compiled 2.4.2 kernel. I'm trying to install pcmcia-cs 3.1.24, now. I disabled every...
3010
cosmint@...
Mar 3, 2001 12:07 am
Hi, I installed Linux Mandrake 7.1 on a Dell Latitude CPxj. When I installed the system, the floppy drive was disconnected. Surprisingly, when I shut it down,...
3011
cosmint@...
Mar 3, 2001 12:15 am
Hi again, I have one more question: It's about the same Dell Latitude CPxj under Mandrake 7.1. I installed the Ethernet not much time ago, and now I removed it...
3012
cosmint@...
Mar 3, 2001 5:49 am
I have further tracked down the problem I had with the 1 minute slowdown when booting Linux Mandrake 7.1 on Dell Latitude CPxj. I now suspect it's not the...
3013
stuart@...
Mar 3, 2001 9:46 am
... compiled ... I am having the same problems. My only PCMCIA card I use right now is an ethernet card. I am considering to upgrade the machine to have the ...
3014
cavallo@...
Mar 3, 2001 10:21 am
OK. But with kernel 2.2.18 and pcmcia-cs-3.1.24 I was able to have the card working (Hamlet 1500, no modem). Could I extract some info from the 2.2.18 running...
3015
maillists@...
Mar 3, 2001 7:29 pm
Are there any docs for getting linux to setup DVD play in X using xine or some other client? I'm basically lost I have xine installed but thats it. I'm running...
3016
LEon LEvy
bugbiteme@...
Mar 4, 2001 2:48 am
hey.. can anyone give me some pointers here on how to install my dial-up internal modem in linum (if possible)? my inspiron 4000 came with a 3Com v.90 MPC...
3017
David Rodriguez
dibeas@...
Mar 4, 2001 6:31 am
... I guess that my advice would be to buy a modem. I don't know if it's useful, but it is an advice. If your modem is a software (winmodem) by 3Com , I don't...
3018
k.lichtenwalder@...
Mar 4, 2001 11:38 am
... A good start might be http://www.livid.org, the Linux Video Project. There's quite some documentation about DVD and tuning your setup. I got me going. (yet...
3019
atctam@...
Mar 4, 2001 2:36 pm
Hi, I have installed Mandrake 7.2 on my Dell Inspiron with Win98 in dual boot mode a few months ago. I use to work on Linux partitions and occasionally boot to...
3020
LEon LEvy
bugbiteme@...
Mar 4, 2001 5:30 pm
... hmm.. well i was hoping for an alternative to that. if that is the case then i guess i'll just have to rely on windows for online-enjoyment. it seems the...
3021
atctam@...
Mar 4, 2001 5:50 pm
Hi, I have recovered from the above situation. So forget about it and thanks for whoever have thought about this problem. Cheers Anthony ... there ... As ... ...
3022
David Rodriguez
dibeas@...
Mar 4, 2001 6:10 pm
... Hi, If it is a winmodem it is 'supported' up to the point of dialing (no data transmision) They are working on that. The only winmodems truly supported are...
3023
moch_v_dove@...
Mar 4, 2001 6:24 pm
Sorry guys for the repost, but I don't think anyone saw this since it was at the end of last month, this is good info for the i8000 Hey everyone, I just bought...
3024
klogv@...
Mar 4, 2001 6:36 pm
Hi, My 5000e system time becomes incorrect after a suspend and a resume. The OS acts as though no time has passed between the suspend and the resume, even if...
3025
Matthew Geier
matthew@...
Mar 4, 2001 8:58 pm
... It is probably trying to use the DNS to look up its own name. I had my RedHat system do something similar 'off the wire'. Gnome effectively hung when I...
3026
jsc3@...
Mar 4, 2001 9:01 pm
... If 3Com would give out any information on it, then the Linux community would be able to install it; 3Com could also write their own driver for it if they...
3027
Thomas Jacob
thomas.jacob@...
Mar 4, 2001 9:57 pm
/etc/pcmcia/config.opts Changing include port 0x100-0x4ff, port 0xc00-0xcff, ... into include port 0x100-0x4ff, port 0xc00-0xcff worked for SUSE 7.1, kernel...
3028
stuart@...
Mar 4, 2001 10:36 pm
... Thomas: Forgive my ignorance, but the two lines you quote above, are the same!?! Exactly what did you change if they are both the same? Stuart Beverly...
3029
Thomas Jacob
thomas.jacob@...
Mar 5, 2001 8:27 am
The original line included 3 parameters, but I don't the exact range. I used dots for the third, butI should have better said include port 0x100-0x4ff, port...
