Ok, I found a way that works very easily for me and I want to supply this in case other encounter similar partitioning questions. The reordering of partitions...
6139
jan.glaescher@...
Sep 1, 2001 7:18 am
OK, I found a way that works for me and I want to supply this information for those who encounter similar problems ... A reordering of partitions can be...
6140
jan.glaescher@...
Sep 1, 2001 7:20 am
OK, I found a way that works for me and I want to supply this information for those who encounter similar problems ... A reordering of partitions can be...
6141
Raymond Laia
slaia@...
Sep 1, 2001 8:11 am
jan.glaescher@... wrote:
> > However, as I already have a WinME partition which is /dev/hda1 (or
> drive C:) I used the PHDISK utility by DELL to create...
6142
jgm@...
Sep 1, 2001 10:03 am
Hi James thank you very much for your help. I tried your XF86config-4 file and it did not work the first time, but chekinhg differences with the one I used, I...
6143
Sunny Dubey
dubeys@...
Sep 1, 2001 3:58 pm
hey, a few things ... first do you mind sending us (or me) your pcmcai.opts file from /etc/pcmcia/ dir. Secondly, can you do lspci -v and tell us what you see...
6144
Sunny Dubey
dubeys@...
Sep 1, 2001 4:00 pm
do you have the correct permissions for the cd-rom drive ?? if you cdrom is /dev/hdb* or /dev/hdc*, just add yourself to the groups that own those device...
6145
xandreax@...
Sep 2, 2001 11:54 am
Hi, did anyone install lm 8.0 on I8100? my kernel 2.4.3 doesn't run (black screen after grub) and kernel 2.2.x stops after Welcome screen. Anyone can help me?...
6146
jgm@...
Sep 2, 2001 3:32 pm
Hi all I am sucessfully using my I8k with RedHat 7.1 and the nVIDIA 1.0 driver. I use the 1600x1200 but can switch to lower resolutions. However, when running...
6147
msussman@...
Sep 2, 2001 3:46 pm
Has anyone tried to get an Epson C40UX printer going on Linux? Mine works nicely on Windows ME, but I cannot find the proper driver for it on Linux....
6148
Stephen Lau
slau@...
Sep 2, 2001 4:57 pm
Set the VirtualDesktop space to be smaller in your XF86Config-4.. -steve ... -- stephen lau :: [slau@...] :: www.whacked.net :: ucsd/cse grad student gpg...
6149
kayard@...
Sep 2, 2001 9:39 pm
Well, after 2 days of work I succeded installing Suse 7.2 on my Dell Inspiron 8100 with GF2go. My goal was to set up 1400x1050. The key point was setting...
6150
ox447@...
Sep 2, 2001 10:32 pm
I going to buy a Sprint cell phone and i want to know if anyone has try to get there cell phone working on red hat linux 7.1? I use a dell inspiron 3800,Do i...
6151
Christopher R. Hoffman
tinyhoffman@...
Sep 2, 2001 11:15 pm
Can you please clarify what you mean by "get the[ir] cell phone working" ? I assume you mean "allow my laptop to connect to the internet via the data port on...
6152
ox447@...
Sep 3, 2001 3:11 am
... phones ... your ... has ... so i don't have to make a new kernel then?...
6153
ox447@...
Sep 3, 2001 3:34 am
How would i get a dell 3800 cd-burner work on red hat linux 7.1?...
6154
YH
yh86us@...
Sep 3, 2001 5:23 am
Hello, Although I've read the MODEM-HOWTO, I am still cannot to make my internal built-in modem work in my I8000. Could anyone give me a simple instruction in ...
6155
jgm@...
Sep 3, 2001 11:19 am
Dear Steve thanks a lot for your help. However, after reading the man of the XF86Config I am not able to put it to work. I am using a single Modes line that...
6156
Stephen Lau
slau@...
Sep 3, 2001 3:55 pm
Are you explicitly passing the command to set the dpi to 100? -steve ... -- stephen lau :: [slau@...] :: www.whacked.net :: ucsd/cse grad student gpg key...
6157
Stephen Lau
slau@...
Sep 3, 2001 3:56 pm
If you have the 3COM modem/combo card, then you're SOL. If you have the ActionTec modem/combo card then read the FAQ... -steve ... -- stephen lau ::...
6158
Stephen Lau
slau@...
Sep 3, 2001 3:58 pm
Hi Peleonk, Sorry - was in a rush last time and didn't explain further. :) A "Virtual" desktop size is what your desktop is set to in terms of resolution,...
6159
kayard@...
Sep 3, 2001 5:08 pm
No! How can I set dpi to 100 explicity? Tanks in advance Paolo Stephen Lau <slau@u...> wrote: Are you explicitly passing the command to set the dpi to 100? ...
6160
Michael P. O'Connor
mpop@...
Sep 4, 2001 4:23 am
Have you gotten it to work, I have the Quallcom QCP-2760 and I little afread of getting the modem for it, if it does not work, $100 is a lot of money for me....
6161
Christopher R. Hoffman
tinyhoffman@...
Sep 4, 2001 4:40 am
Not as of yet. But then, I haven't given much of an effort... I have an AudioVox, witch has internal modem logic, so I've been able to make dialups with it as...
6162
Ron Menelli
ron@...
Sep 4, 2001 7:18 am
... You shouldn't need a modem for your 2760 - just a data cable - unless you need to have internet access in an area that has only analog service. A data ...
6163
lisnalinchy@...
Sep 4, 2001 11:27 am
I am having a really strange problem with a Dell Lattitude notebook (CPtS) and a Dell P790 monitor. At work I want to use a base station and Dell monitor. I...
6164
Boris Bronshteyn
boris@...
Sep 4, 2001 8:16 pm
Hello all, Thanks in advance for any help. I have just bought new Inspiron 8100. I am trying to install RedHat 7.1 on it. So far unsuccessfully. The...
6165
marc van duivenvoorde
marc@...
Sep 4, 2001 10:17 pm
Does anyone have a working XF86Config file for a dell inspiron 8000 running Suse 7.2 I tried a lot to get my X running and it doesn't seem to do so. I only get...
6166
hadig@...
Sep 5, 2001 12:07 am
Hi Marc, you need XFree 4.x, which is included on SuSE 7.1 and higher. Use the switch_xf86-4 or so command in /usr/X11R6/bin (or so). In addition you will find...
6167
Raj
brillfox@...
Sep 5, 2001 4:32 am
Hi, the installation abnormally terminates after receiving signal 11. It unmounts the devices, umount of /mnt/source fails. The last message on message console...
