... Is there any instrumentation in the mac-specific code? ... I'm afraid it didn't help. ... I don't know which flags do what, but I turned these on, anyway: ...
Finn Thain
ft01@...
Sep 2, 2004 2:05 am
6996
Hi Kars, ... Well, I just learned that the SCSI problem is not limited to read/write devices. I tried this: $modprobe isofs $mount -t iso9660 /dev/scd0 /mnt ...
Finn Thain
ft01@...
Sep 2, 2004 4:33 am
6997
Hello, with information given by Alfred G. de Wijn and some examples in linux and netBSD, I wrote a floppy driver for the SWIM controller. You can find...
Laurent VIVIER
laurentvivier@...
Sep 2, 2004 1:21 pm
6998
Thank you Laurent, I will try this out next time I get my lc575mobo-in-a-colourclassic set up again. cheers! -Eric ... ...
Eric Shattow
shadow@...
Sep 2, 2004 10:25 pm
6999
Hello, my ADSL is up again, so I put some binaries in the EMILE sourceforge project page. I put a bootable floppy and ramdisk on a floppy. You can boot on the ...
Laurent Vivier
LaurentVivier@...
Sep 3, 2004 12:57 pm
7000
... I tried these two floppies on the following systems which all boot with Penguin 19: IIx w/Daystar Turbo 030 - Hangs w/ Mono Tux Logo and ABCFGHIJ IIci -...
Raylynn Knight
audilover@...
Sep 6, 2004 5:21 am
7001
... LC520 w/ 36MB - Displays EMILE copyright notice, then Sad Macs. LC575 w/ 68MB - Boots kernel, loads installer. I already have Linux on all of these boxes,...
Raylynn Knight
audilover@...
Sep 7, 2004 12:39 am
7002
... Attached bz2 archive appears corrupted. bunzip2 complains its not bz2 archive. Could you please email me the patch as inline text? -- Raylynn Knight...
Raylynn Knight
rayknight@...
Sep 7, 2004 1:48 am
7003
... Laurent, please do _not_ encode your files as MacBinary if not necessary, if you post to lists, or append a .bin to these attachments. :-) It's...
Carsten Neumann
deltor@...
Sep 7, 2004 3:05 am
7004
Hello all, I try to keep some applications 'ported' to our beloved 68k platform. But unfortunately if there are no kernel improvments I just can't keep the...
Riccardo Mottola
rollei@...
Sep 9, 2004 10:36 am
7005
... That sounds like the ssh problem Erik Laas had on the Q650 with debian/testing, http://lists.debian.org/debian-68k/2004/08/msg00494.html Would his...
Finn Thain
ft01@...
Sep 9, 2004 12:27 pm
7006
... Sorry, that should have been Erik Laan. -F _______________________________________________ linux-mac68k mailing list linux-mac68k@... ...
Finn Thain
ft01@...
Sep 9, 2004 12:33 pm
7007
Hey, thanks for the fast reply. ... Yes, from what I could grasp on the screen before pages of register and similars were dumped, the error seems that. But I...
Riccardo Mottola
rollei@...
Sep 9, 2004 12:59 pm
7008
I forgot... ... I run 2.2.25. It seems the best kernel that supports that quadra. I totally skipped 2.4 era and wait faithfully for 2.6 -R ...
Riccardo Mottola
rollei@...
Sep 9, 2004 1:27 pm
7009
If I understand correctly you're trying to transfer a file, over a local lan, to a q950, which is running 2.2.25. SSH and FTP don't work. Updating via Apt did...
Olson, Greger J - PGP...
gjolson@...
Sep 9, 2004 3:47 pm
7010
... Well, I've ended up being the default maintainer of some of the IIfx stuff since JMT seems to have disappeared. I haven't done much with it either, but...
Brad Boyer
flar@...
Sep 9, 2004 4:33 pm
7011
... tune2fs -j /dev/sdx ext3 is supported by kernel-image-2.2.25-mac >= 2.2.25-4 (in sarge and sid). You are using the kernel parameter mac53c9x=2,0 for the...
Stephen R Marenka
stephen@...
Sep 9, 2004 5:17 pm
7012
... You could also try rcp or curl/wget. If this is the same bug that Erik reported, it was confined to ssh between PuTTY (Windows) and the mac. SSH between...
Finn Thain
ft01@...
Sep 9, 2004 5:33 pm
7013
... Well, it happened between Solaris with OpenSSH and linux... and then I ftp-d to the same machine. I could try scp from another box, just to test... but I...
Riccardo Mottola
rollei@...
Sep 9, 2004 7:18 pm
7014
Hey, ... I have a kernel compiled today, 2.6.8.1 on a q840 running woody (that is, no kludge is needed for Penguin to useit). The kernel boots fine on the...
Riccardo Mottola
rollei@...
Sep 9, 2004 10:33 pm
7015
Hello, the kernel I compiled and for which I reported the status on q840 and IIfx was tested on my q950 too. The kernel starts to boot, passes the first...
Riccardo Mottola
rollei@...
Sep 9, 2004 11:04 pm
7016
... Could you try it with "mac53c9x=1,0"? This will disable the external SCSI port, but it may allow you to use internal devices. The driver used to be broken...
Brad Boyer
flar@...
Sep 10, 2004 12:26 am
7017
... On a q840av, the RTC is tied to ADB. Does your keyboard work with this setup? If ADB works, then RTC and PRAM should both be fine. On the other hand, a...
Brad Boyer
flar@...
Sep 10, 2004 12:36 am
7018
Hi all, I've got a mac color classic, and the logic board from a mac LC575 has been swapped into it. At one time i had it booting a 2.2.25 linux kernel from...
Eric Shattow
shadow@...
Sep 10, 2004 12:56 am
7019
... A Gestalt ID changer might be a good idea for cases like this one, but ultimately the correct solution is to inform the kernel that 99 is a supported...
Joshua Juran
wanderer@...
Sep 10, 2004 1:26 am
7020
... I seem to recall that someone (can't recall who) had determined that the Apple doc for the IIfx DMA had the rx and tx registers reversed. Fuzzy memory,...
Raylynn Knight
audilover@...
Sep 10, 2004 5:04 am
7021
Hey, ... Works ! at least, the kernel passes that critical point. I see some strange messages though, about removing non-existent interrupts and similar. it...
Riccardo Mottola
rollei@...
Sep 10, 2004 9:47 am
7022
... There definitely are some handwritten corrections on the documents I have laying around. I belive I got DMA transfers working, since the buffer contained...
Brad Boyer
flar@...
Sep 10, 2004 4:32 pm
7023
... Good to hear. Someone needs to go back and find the fixes from 2.2 that allowed the second port to work, I guess. I don't have the hardware, so it's tough...
Brad Boyer
flar@...
Sep 11, 2004 3:34 am
7024
On Thu, 9 Sep 2004, Kars de Jong wrote:
> ...
>
> Hmm, OK, [the VIA code] did change. In 2.2, the VIA interrupt handler
> does:
>
> 1) disable interrupt
> 2)...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
