I often see requests for information about accessing an MMC (MultiMediaCard) disk with the LPC2106. So, going off half cocked with the flush of initial...
Hello all, I'd like to thank all who suggested their solution(s) to my post. My error was that I was "enabling" THRE interrupt in U0IER reg. while DLAB was...
I recently resurrected an old toolkit (ARM ADS V1.2) to use developing a Philips LPC2106 based system. I can't get this software to properly build anything...
Try test1.zip from the files area. It contains ADS1.2 project. ADS 1.2 is one of the best tools I have come across. Using latest patches might help too ...
I've done a couple of changes to the Blinky Lights / UART code and uploaded the new version. The major change is adding code to initialize the VIC when UART1...
Here are some macros to initialize the VIC: #define paste(front, back) front ## back #define VIC_VECT_ADDR(slot, isr) paste(VICVectAddr, slot) = (unsigned...
Hello Robert, I believe what you are seeing was actually meant as an improvement in the latest version of the ISP tool. Previous versions could not compare (or...
Hello Robert, I believe what you are seeing was actually meant as an improvement in the latest version of the ISP tool. Previous versions could not compare (or...
... Given a choice between a program that on rare occasions misses an error and one that almost always claims a non-existent error (and doesn't finish the ...
Hi,
I'm starting development on LPC2106 using GNU Tools.
What's a good and cheap hardware/software solution for debugging via
JTAG interface and GDB of...
Hi, I am trying to setup my LPC2129 (MCB2100) to respond to external interrupts. I am using the following initialization sequence (For the interrupt): ...........
test -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Realizza regali originali con le tue foto/immagini/scritte! * Stelle &...
Hi,
I'm starting to develop on LPC2106 using GNU Tools.
What's a good and cheap hardware/software solution for debugging via
JTAG interface and GDB of...
Hi, I would like to use ARM ADS 1.2 for starting development on a Philips LPC2106 too. So I would like to ask if there is an easy to use possibility to...
WIGGLER clone from Olimex On Thu, 05 Aug 2004 10:04:49 +0200, FabioDB wrote: Hi, I'm starting to develop on LPC2106 using GNU Tools. What's a good and cheap...
The ARM Debuggers (ADW/AXD/RealView) support flash programming, however, you may need to adapt it for LPC2000. Our PathFinder debugger supports the ARM ...
Il gio, 2004-08-05 alle 14:28, Bill Knight ha scritto:
> WIGGLER clone from Olimex
I work on Linux and Macraigor OCDLibRemote driver for Linux don't
support...
Il gio, 2004-08-05 alle 14:28, Bill Knight ha scritto:
> WIGGLER clone from Olimex
I work on Linux and Macraigor OCDLibRemote driver for Linux don't
support...
Sorry for double post. :-P -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Migliaia di prodotti a tua disposizione di...
Hello, I use the ARM ADS 1.2 with the debugger AXD. I would like to download a small testprogram to RAM and start debugging. As JTAG debug-interface I use the...
Has everyone seen the LPC2000 errata at: http://www.semiconductors.philips.com/acrobat/erratasheets/2105.pdf Interestingly, there is a new version of the boot...
Thanks Hugh, I'm currently running IAP's on a PLL using lpc2129's (version 1.53 bootloader). So far, no problems yet. I notice that the errata also applies to...
Hello Leighton, The version of the bootloaders that do not have the improved timing behavior is different for the LPC210x and all other LPC2000 family members...
I just saw the lpc2129/2114 errata earlier. So, everything's clarified now. Updating the affected chipsets wouldn't be a problem. Thanks again, Leighton ... ...
Date: Fri, 6 Aug 2004 11:52:46 +0100 From: "Hugh O'Keeffe" <hugh.okeeffe@...> ... Wondrous! This version of the bootloader fixes *all* our IAP problems...
Wow, wow !! Philips claims that the bootloader is non-destructive from the app's point of view. So how can it be that we can download a hex file into the RAM,...
I want to buy a few (say 10) LPC2106's. Everywhere I have looked lists the minimum quantity is a tray of 250. I don't have $2500 for my hobby budget. There...
Hi,
exist an ARM7 emulator?
____________________
FabioDB -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Scegli il...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
