Hello friends, I'm still pretty unexperienced in programming the LPC2xxx processors. I want read and write the internal flash using IAP. At first, I tried to...
Hello friends, I'm still pretty unexperienced in programming the LPC2xxx processors. I want read and write the internal flash using IAP. At first, I tried to...
... This is really starting to annoy me big time. Running with my original set of startup + linker files I'm now able to make the interrupts work the first...
Hello all, I recently purchased an Olimex LPC - H2294 board with 1MB External SRAM and 4 MB External Flash. I have the following problem : I can't access to...
Go to www.sparkfun.com, click on the 2294 and there is a demo (includes source code) that shows read/write external flash, read/write external ram. Sonny...
I have this memory (probably I'm hallucinating) that I read about a problem using the ADC and the DAC at the same time on those LPC213x chips that have the...
Hi, may be (just may be) you have been using the LPC900 family of Philips as well. On that family the DAC is part of the ADC and can not be used at the same...
... Perhaps this is the problem...the FTDI chips have the odd characteristic that the WRITE strobe is active-high, rather than the otherwise universal...
Hello all, Sonny, thanks for the hint. I tried to start the project and IAR doesn't recognize it at a valid project. I created a new project with IAR and I...
can i port uclinux with the 512 kb of flash philips 2138 without any problem to my appilcation( which is less than 6 kb). ... Too much spam in your inbox?...
I'm designing a LPC2138 board without an external RTC xtal circuit. Any ideas how to handle the RTCX1 & RTCX2 real time clock oscillator pins when not used?...
Hi Bill, LPC2138 RTC pins may be kept unwired (do not connect any thing) and let the registers in default state while you are not using. There is no special...
Hello Cris, In your code result[1] contains the ID...you should return result[1] instead of result[0]. results[0] only says the cammand is sucess. regards, Tom...
Hi Tom, thank you for your help. The result is still not my problem. I changed that sometimes from reslut[1] to result[0]. The problem is, the programm sticks...
Thanks Martin, I received the source files via email and will try it very soon (sorry for the late reply yet it was a long 'Canada Day vacation' weekend). BTW,...
Message 7923 describes a bizarre stack problem on the 213x. If this is correct, it would seem to seriously limit the usefulness of this part. What say you...
Hi, I have read all postings regarding use of LPC2000 flash utility from Philips on this group and Circuit Cellar BB and tried all of them. Finally i saw its...
Dave, Your pointer was a little misleading (7923) but I found the issue described in 7898. My question to the original poster (I guess Keith) is whether the...
Can you add a short summary of the problem, what the problem is ? Regards, Martin ... From: "lpc2100_fan" <lpc2100_fan@...> To: <lpc2000@yahoogroups.com>...
The sample code can be found on the olimex site (www.olimex.com) and if you navigate to the page supporting the ARM LPC-P2106 board, you'll see links for the...
Hi Sunil, I managed to flash my board yesterday (after sorting out lots of problems with the flash utility). Have u tried removing the JTAG jumper? (i believe...
Hi to everyone! I'm a new user on this ML and I need some help please :). I just bought a proto board with an LPC2138 arm processor, my problem is that I think...
Martin and All, Sorry for the wrong message number. Message 7898 fully describes the problem. In brief: " It appears anytime the PC and SP are equal except for...
Hi, I am experimenting with the lpc2138 evaluation board too. I managed to flash mine with the LPC2000 flash utility (the latest version ver.2.2.2) with xtal...
This seems disastrous, severely limiting the usefulness of the part. Is this just a problem with the 213x parts? _____ From: lpc2000@yahoogroups.com...
