The Laboratory Robotics Interest Group Discussion Group is for comments or questions about Laboratory Robotics and Automation. You receive messages posted to...
6242
Steve Fillers
steve.fillers@...
Oct 1, 2008 11:08 pm
Wayne, Automated ELISA is a loop or loops of ADD-->MIX-->INCUBATE steps terminated by a STOP-->READ or not terminated but multiple READs for more accurate rate...
6243
jjf3550
Oct 1, 2008 11:08 pm
Hi, does anyone know, if the former EURO/ DPC Micromix 50 shaker is still on sale somewhere? We actually have quite a lot of them in our department and are...
6244
amerhaj@...
amer_elhage
Oct 2, 2008 12:30 am
Hi Johannes, Have you checked with resellers of used and reclaimed equipments from closed labs? I can forward your comment to one I know locally if you want. ...
6245
Neil Benn
neil.benn@...
Oct 17, 2008 3:21 am
Hello, I recently fond an web application called Kronomy which is designed to allow people to put their life story into pictures. However I had the idea of...
6246
Matt Bristow
psych152
Oct 17, 2008 3:22 am
Hi, I'm using a Tecan Genesis to run ELISAs and we have hit a frustrating problem that I would appreciate any advice or suggestions on. Our usually stable...
6247
amerhaj@...
amer_elhage
Oct 17, 2008 2:08 pm
Matt, Â I sympathize with your frustration. The problem seems quite perplexing. I will need to know more about the system (look at the data and walk around)...
6248
Ian McFarlane
cambridgecor...
Oct 17, 2008 2:08 pm
I wonder if you could tie it down to a specific step of the protocol by mixing manual with robotic steps. Eg, start the robotics from the IgA and complete,...
6249
Kevin K. Olsen
olsenkevink
Oct 17, 2008 6:17 pm
Niel wrote: "This could be a good measure of how far we have come as a community in the (relatively) short lifetime of lab automation :)." I beg to...
6250
Neil Benn
neil.benn@...
Oct 19, 2008 5:35 am
Hello, That is fantastic, thank you Kevin. I will see if I can get some pictures of the items you have discussed and add those into the timeline. You have...
6251
Jon Alden
jon.alden@...
Oct 19, 2008 5:35 am
I have seen this before. In the past it has been related to the specific reagent container aspiration height and/or dimensions used for tracking when ...
6252
captainbodge
Oct 22, 2008 5:34 pm
Dear Neil, Have not logged on for a while and saw your message. If you are still looking for an engineering company I can highly reccommed Rank Brothers in...
6253
Matt Swan
akademos2003
Oct 25, 2008 3:26 am
Hi, I'm researching automated incubators for use with microtiter plates in LAS systems. I'm aware of the Liconics and Cytomat offerings. Are there any other ...
6254
lrig-discussion@yahoo...
Nov 1, 2008 7:35 am
The Laboratory Robotics Interest Group Discussion Group is for comments or questions about Laboratory Robotics and Automation. You receive messages posted to...
6255
D W
biorobotdude
Nov 3, 2008 11:58 pm
what about a titertek multidrop with a 10 way valve on it? this is a bult reagent dispenser so no tips would need to be changed. and you can put a stacker on...
6256
Neil Benn
neil.benn@...
Nov 5, 2008 3:39 am
Hello, I've done that before and it works pretty well, flexible and capable of running homogenous assays fast and with no fuss. My company can also help you...
6257
jliscouski
Nov 12, 2008 9:33 pm
I've posted a few notes in the past about work Delphinus has been doing in education, in particular the recently held "Manager's Guide to Laboratory Automation...
6258
Adam, Shiraz
adam_shiraz
Nov 23, 2008 6:48 am
Hi, I was looking for a reliable plate labeller to label plates with. I was wondering if anyone had experience with working with plate labelling. I would need...
6259
Kevin Keras
kevin_keras
Nov 25, 2008 2:33 am
Hi Adam, We have integrated a number of V11 VCode and Computype LAP4110, and both are very reliable units. I would also suggest you take a look at the CyBio...
6260
Xavier Perrodon
xavier.perrodon
Nov 25, 2008 2:34 am
Hi Shiraz, I have used the V11 VCode in the past and was very happy with it. The only small issue we had at the beginning was to fine tune the speed at which...
6261
Köhler, Steffen
ixi_steffen
Nov 25, 2008 2:34 am
Hi Shiraz, I am working since year with the CyBiPrint made by CyBio AG. The CyBiPrint is easy to use and reliable. I think CyBio have a distributor on your...
6262
John G DeCarolis
John.G.DeCarolis@...
Nov 25, 2008 2:34 am
Shiraz We have been using a Computype labeller with Bar-One software. It has worked well for about 4 years now with little maintenance. You do have to keep the...
6263
martin wang
pri_martin
Nov 25, 2008 2:34 am
Shiraz, Here is a useful link which has some basic function comparison: ...
6264
West, Sandra
swest@...
Nov 25, 2008 2:35 am
We use Brady labels (bradyid.com). What I like about their product is the variety of label media available and the pre-designed templates in the Bradysoft...
6265
coloma1561
Nov 27, 2008 6:53 am
Hi Shiraz, Here is a link to a bar code print and apply workstation from CyBio http://www.cybio- ...
6266
lrig-discussion@yahoo...
Dec 1, 2008 8:38 am
The Laboratory Robotics Interest Group Discussion Group is for comments or questions about Laboratory Robotics and Automation. You receive messages posted to...
6267
mark ollmann
mark_r_ollmann
Dec 2, 2008 12:00 am
Does anybody so something similar? I found the most I could dispense was 2-3uL, otherwise the drop was too big and flooded the top of the plate. I could...
6268
jgnygaard
Dec 2, 2008 4:39 am
Has anyone used, or does anyone know, where I might be able to find slightly wider-bore tips for use on the Biomek FX 384-channel head (similar to the Beckman...
6269
Mark Ollmann
mark_r_ollmann
Dec 3, 2008 5:57 am
The Title got cut off, should have included that I am working with a Flexdrop for PU, I mean PE. [Non-text portions of this message have been removed]...
6270
Kevin Keras
kevin_keras
Dec 3, 2008 5:58 am
Hi John, Phenix Research (www.phenixresearch.com) has 96 channel wide bore tips for the FX, and they also have extended reach tips that increase the volume...
