Have a look, makes your work faster.
Taken from:
http://linux.about.com/od/linux101/l/blnewbie5_1.htm




<Ctrl><Alt><F1>
Switch to the first text terminals. Under Linux you can have several
(6 in standard setup) terminals opened at the same time. This is a
keyboard shortcut, which means: "press the control key and the alt
key, hold them. Now press <F1>. Release all keys."

<Ctrl><Alt><Fn> (n=1..6)
Switch to the nth text terminal. (The same could be accomplished with
the rarely used command chvt n. "chvt" stands for "change virtual
terminal"). In text terminal (outside X), you can also use <Alt><Fn>
(the key <Ctrl> is not needed).

tty
Print the name of the terminal in which you are typing this command.
If you prefer the number of the active terminal (instead of its name),
it can be printed using the command fgconsole (="foreground console").

<Ctrl><Alt><F7>
Switch to the first GUI terminal (if X-windows is running on the 7th
terminal, where it typcially is).

<Ctrl><Alt><Fn> (n=7..12)
Switch to the nth GUI terminal (if a GUI terminal is running on screen
n-1). On default, the first X server is running on terminal 7. On
default, nothing is running on terminals 8 to 12--you can start
subsequent X server there.

<Tab>
(In a text or X terminal) Autocomplete the command if there is only
one option, or else show all the available options. On newer systems
you may need to press <Tab><Tab>. THIS SHORTCUT IS GREAT, it can
truely save you lots of time.

<ArrowUp>
(In a text or X terminal) Scroll and edit the command history. Press
<Enter> to execute a historical command (to save on typing).
<ArrowDown> scrolls back.

<Shift><PgUp>
Scroll terminal output up. This works also at the login prompt, so you
can scroll through your bootup messages. The amount/usage of your
video memory determines how far back you can scroll the display.
<Shift><PgDown> scrolls the terminal output down.

<Ctrl><Alt><+>
(in X-windows) Change to the next X-server resolution (if you set up
the X-server to more than one resolution). For multiple resolutions on
my standard SVGA card/monitor, I have the following line in the file
/etc/X11/XF86Config (the first resolution starts on default, the
largest resolution determines the size of the "virtual screen"):
Modes "1024x768" "800x600" "640x480" "512x384" "480x300" "400x300"
"1152x864"Z
Of course, first I had to configure the X server, either by using
Xconfigurator, xf86config, or manually by edition the file
/etc/X11/XF86Config, so that it supports the above resolutions (mostly
the matter of uncommenting the line that defines my video chipset, and
specifying the synchronization frequencies my monitor supports).
XFdrake (Mandrake configuration utility) can do it from GUI. See also
the commands xvidtune and xvidgen.

<Ctrl><Alt><->
(in X-windows) Change to the previous X-server resolution.

<Ctrl><Alt><Esc>
(in X-windows, KDE) Kill the window I am going to click with my mouse
pointer (the pointer changes to something like a death symbol).
Similar result can be obtained with the command xkill (typed in
X-terminal). Useful when an X-window program does not want to close
(hangs?).

<Ctrl><Alt><BkSpc>
(in X-windows) Kill the current X-windows server. Use if the X-windows
server cannot be exited normally.

<Ctrl><Alt><Del>
(in text terminal) Shut down the system and reboot. This is the normal
shutdown command for a user at the text-mode console. Don't just press
the "reset" button for shutdown!

<Ctrl>c
Kill the current process (works mostly with small text-mode applications).

<Ctrl>d
(pressed at the beginning of an empty line) Log out from the current
terminal. See also the next command.

<Ctrl>d
Send [End-of-File] to the current process. Don't press it twice else
you also log out (see the previous command).

<Ctrl>s
Stop the transfer to the terminal.

<Ctrl>q
Resume the transfer to the terminal. Try if your terminal mysteriously
stops responding. See the previous command.

<Ctrl>z
Send the current process to the background.

exit
Logout. I can also use logout for the same effect. (If you have
started a second shell, e.g., using bash, this command will make you
exit the second shell, and you will be back in the first shell, not
logged out. Then use another exit to logout.)

reset
Restore a screwed-up terminal (a terminal showing funny characters) to
default setting. Use if you tried to "cat" a binary file. You may not
be able to see the command as you type it, but it still will work.

<MiddleMouseButton>
Paste the text which is currently highlighted somewhere else. This is
the normal "copy-paste" operation in Linux. It a fast and powerful
supplement to the widely-known GUI "copy-paste" menu-based operation.
(It doesn't work inside older versions of Netscape which use the
Mac/MS Windows-style "copy-paste" exclusively. It does work in the
text terminal if you enabled "gpm" service using "setup". It also
works inside any dialog boxes, etc.--really convenient!) It is best
used with a Linux-ready 3-button mouse (Logitech or similar) or else
set "3-mouse button emulation". The <MiddleMouseButton> is normally
emulated on a 2-button mouse by pressing both mouse buttons simultanously.

~
(tilde character) My home directory (normally the directory
/home/my_login_name). For example, the command cd ~/my_dir will change
my working directory to the subdirectory "my_dir" under my home
directory. Typing just "cd" alone is an equivalent of the command "cd
~". I keep all my files in my home directory.

.
(dot) Current directory. For example, ./my_program will attempt to
execute the file "my_program" located in your current working directory.

..
(two dots) Directory parent to the current one. For example, the
command cd .. will change my current working directory one one level up.

Some additional KDE keyboard shortcuts (useful, but non-essential)
<Alt><Tab> Walk through windows. To walk backwards: <Alt><Shift><Tab>
<Ctrl><Tab> Walk through desktops. To walks backwards: <Ctrl><Shift><Tab>
<Ctrl><Esc> Show the table of processes running on my system. Allow me
to kill any of the processes I started (or send other signals to them).
<Alt><F1> Access the K-menu ("Equivalent to MS Windows "Start" menu).
<Alt><F12> Emulate the mouse using the arrow keys on the keyboard.
<Alt><LeftMouseButton> Drag a window to move it. Normally, I move a
window by dragging its top title bar, but occassionally I manage to
get it off the screen. With this shortcut, I can drag by any part of
the window.
<Alt><PrintScreen> Take a snapshot of the current window into the
clipboard.
<Ctrl><Alt><PrintScreen> Take a snapshot of the entire desktop into
the clipboard.
<Ctrl><Alt><l> Lock the desktop.
<Ctrl><Alt><d> Toggle hide/show the desktop (great to hide the
Solitaire game when your boss walks in).

<Alt><SysRq>
(Non-essential.) This is a group of key combinations implemented at
the Linux kernel level (a low level). It means, chances are these key
combinations will work most of the time. The combinations are meant
for debugging purposes and in an emergency (mostly developers); you
should try other, safer solutions first. The key <SysRq> is also knows
on PC as <PrintScreen>. The combinations can be enabled/disabled by
setting the relevant kernel variable to "1" or "0", e.g. : echo "1" >
/proc/sys/kernel/sysrq
<Alt><SysRq><k> Kill all processes (including X) which are running on
the currently active virtual console. This key combination is know as
"secure access key" (SAK).
<Alt><SysRq><e> Send the TERM signal to all running processes except
init, asking them to exit.
<Alt><SysRq><i> Send the KILL signal to all running processes except
init. This may be more successful in killing runaway processes than
the previous key combination, but it may cause some of them to exit
abnormally.
<Alt><SysRq><l> Send the KILL signal to all processes, including init.
The system will not be functional.
<Alt><SysRq><s> Run an emergency sync (cache write) on all mounted
filesystems. This can prevent data loss.
<Alt><SysRq><u> Remount all mounted filesystems as read-only. This has
the same effect as the sync combination above, but with one important
benefit: if the operation is successful, fsck won't have to check all
filesystems after a computer hardware reset.
<Alt><SysRq><r> Turn off keyboard raw mode. This can be useful when
your X session hangs. After issueing this command you may be able to
use <Ctrl><Alt><Del>.
<Alt><SysRq><b> Reboot immediately without syncing or unmounting your
disks. Your will likely end up with filesystem errors.
<Alt><SysRq><o> Shut the system off (if configured and supported).
<Alt><SysRq><p> Dump the current registers and flags to your console.
<Alt><SysRq><t> Dump a list of current tasks and their information to
your console.
<Alt><SysRq><m> Dump memory info to your console.
<Alt>SysRq><digit> The digit is '0' to '9'. Set the console log level,
controlling which kernel messages will be printed to your console. For
example, '0' will cause only emergency messages like PANICs or OOPSes
displayed on your console.
<Alt><SysRq><h> Display help. Also, any other unsupported
<Alt><SysRq><key> combination will display the same help.


More:
http://onlyubuntu.blogspot.com/2007/03/bash-shell-keyboard-shortcuts-for-linux.h\
tml



http://linux.about.com/od/linux101/l/blnewbie5_1.htm