I am having a fairly recurrent problem (comes and goes but sometimes happens many runs in a row) with the M1OASYS driver when it is launched as an ASCOM driver...
I finally got a phone line put in the OBS. What do I need to do to call my awesome system and tell it to open or close the roof? Also, can we make it smart...
Hi David. You should be able to connect your phone line to the telco port as per the directions and it should pick up after 4 rings. Once connected you will...
Hi David, I will be out at my obs this weekend and will test this to see if I can get this msg to pop up...I have not seen it before. -Chris ... sometimes...
We are currently beta testing a new version of the driver that will include a very comprehensive environment watcher to monitor weather, power, etc. Most...
Will this system interface with Davis weather stations? marshall Chuck Faranda wrote: We are currently beta testing a new version of the driver that will...
Yes, and most others too. Regards, Chuck Faranda http://ccdastro.net ... From: Marshall Edgell To: m1oasys@yahoogroups.com Sent: Monday, November 17, 2008...
Need advice to install my Cutler Hammer photo sensors as scope "parked" sensors in my observatory. Wanted some advice on method and mounting position of...
Hi Jim. I have two AP1200 setups in my observatory and use the Cutler sensors. On Scope 1 I placed the reflector on the top plate of the scope, facing the...
Hi, I currently successfully switch the Daikin air-conditioner unit off using a rule when the roof opens remotely via the M1 OASYS using an M1 output linked...
Hi Tim, the best way to put in a delay into a rule is to actually write 2 rules, one that starts a timer (I use relays for the logic switch) and the other...
I am looking for a way to ensure my scope has moved to the home position before the roof closes. I am a little worried to have IR bouncing around in the dark...
Chris--I removed ALL the IR sensors (the M1 provided sensor as well as my comerical opener sensors) as I have an open Truss RC and had issues with the IR...
David, Thank you for providing your experience on the matter. I have emailed Chris and I'm waiting to hear back from him. This all began when a friend pointed...
Hi Guys...sorry it took a while for me to reply...I've been traveling a bit these days. Chris, that sensor will work. It is very similar to the sensors...
Chris H--Is the sensor in the link you provided any different than the red beam/reflector combo we are using? Regardless, is there any variation of either...
Hi Dave...This is the same sensor. A real simple solution here is to route the sensors through one of the open relay's and control the power to the sensor via...
Folks, I wired all my sensors (I have 3, 2 reflective and 1 IR), through Relay 16. What I did was to take the +12V off the VAUX for each sensor and put them...
Hi, I am having trouble getting two PC's in the observatory with each PC controlling one mount with CCDAP4, to have two copies of the MIOASYS driver running...
Hi Tim, Yes, multi instances and connections are allowed. Are you sure that you have network connectivity and proper permissions? Can both computers connect...
Hi Chuck, Thanks. Yes, both PC's connect OK alone..... If one instance of M1OASYS driver is already connected the one on the second PC fails to connect... But...
Tim, Try a different order for the connecting the computers. When the second one doesn't connect have you retried linking several times? Can you connect both...
Hi Tim, Hope all is well. We have not designed the m1OASYS driver to work with two mounts, yet...As Chuck suggests it may be an issue with the M1XEP module...
Chris I know that you started testing this before. Have you completed testing your script to shut off the park position sensor beam after opening the roof? I...
Hi Chris. I have not yet written a rule to turn the sensors back on upon a close task. I did write this rule to turn them off: Whenever Obs Roof Opened (Zn...
For some that might have ISP's that block port 80 here is a suggestion from the ELK forums...I have not tested this but sounds like it would work... "To access...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
