Thank you for the quick reply ... It's definitely in input 0 ... I removed the LED but am still getting no reading in Flash. ... Okay, I just tried this and...
Hi Diana, Let's try another form of isolation. You've probably noticed the green LED on the Introductory Module. It normally blinks about once a second. In...
hi list. me and travis trying to get a steppermotor work with this teleo thing in flash. we got the analogue-in values working in the rotater example working....
Michael -- I just tried this, and I get no response. The light is blinking once per second, and when I wave my hand over the sensor it still blinks just once...
Hi joconoco, Something seems wrong with your USB virtual serial port. Take a look at the FAQ http://www.makingthings.com/products/FAQ/faq.htm#Q00 to confirm...
Hi Carla, Yes, I'm on Jaguar, so that very likely is the reason for the differences. I would imagine that the new System Profiler must still have the same ...
Hm... I am not seeing anything that says "USB High Speed Serial converter" in my System Profile App. I do see a "USB High-Speed Bus", but then no fiurther...
hi michael, i run through the faq-list but didn't need to do anything as everything was as described in there. so i was ready to write back but gave the server...
This could be due to either the FTDI USB driver not being installed, or the cable not working. You did install the FTDI USB driver, didn't you? I can't recall...
Okay, tried a different cable (the one from my printer) and still no response. I even did a restart. Yes, I definitely installed the FTDI USB Driver. I ran the...
ONE more thing. I don't know if this is helpful info but I thought I'd give it a shot: When there is no cable connected at all I get a fast blinking on the...
Hi Carla, I think we need to figure out how to use the Apple System Profiler to tell us what's going on. Poking around a bit on the web, I discovered that in...
Hi, does anyone know what the pwm frequency of the introductory set is? I'd like to drive a higher power h-bridge chip with it and am worried the frequency...
Hi Carla, (I'm bringing this back to the mailing list because I think this might be of general interest) We're going to try to uninstall and then re-install...
Hello, I'm new to teleo hardware and Max. The University I'm attending has ordered the Teleo hardware and I plan to use it in conjunction with MAX/MSP along...
Well, I did what you suggested: 1. uninstalled the files you noted, and 2. reboot. It was indeed gone from the System Profile. I also unplugged the USB to...
Hello Carla, I think we've just about exhaused all software explanations, and I wonder if there isn't a flaw with your Teleo hardware. All modules are tested...
hi list! i was wondering what kind of data the teleo-thing was sending and receiving. if it might be possible to use director directly to communicate with the...
Came across the new problem w/teleo-flash. Teleo constantly got disconnected(not functioned) while testing the sample file(rotator) on flash with teleo with...
Hi Nkax, Sorry we've been a little slow at getting back on the list. Virtually the whole of MakingThings has been in New York doing the Flash Forward ...
Hi there, Helga, Sorry this is has taken a while - we've been winning friends and influencing people in New York at the Flash Forward conference! Your...
Hi Noco, You certainly can communicate directly with the Teleo equipment. In director you can do this in one of three ways: 1) you can embed Flash movies that...
Monday, July 12, 2004, 9:25:47 PM, you wrote: DW> Hi Noco, DW> You certainly can communicate directly with the Teleo equipment. In DW> director you can do this...
Hi Sylvain, Sorry for the long delay in answering this...I'll take the questions in reverse order: 2) There is a bug in the TeleoProxy that prevents early...
OK. I've included several routines to this email that will help you figure this out. 1) the input parser we call it every time we get a character. When it ...
David, thanx a lot. i am not hungry for some time. will look at all this. let you know if there are questions left! merci! \n Tuesday, July 13, 2004, 1:58:28...
Hi, I have been playing with the Introductory Set for about two months now and I'm very enthusiastic about Teleo... I'm now going to activate the second part...
Hi Vincent, The module was designed to work with NTSC. All the timing is very delicate so I'm not very optimistic about it working with PAL. Sorry! D. ... ...
Having a major problem with teleo and flash. been trying to fix the problem for days, I am on Panther, Mac G4 using video module w/security camera for input...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
