You probably thought I forgot about the problem below, but I did finally get to it. Http://www.grzsoftware.com/v2dl.php has a new build with the following...
I've been playing with MeshCam2 for a couple of weeks now trying various strategies for cutting designs in wood on my Sherline CNC. A couple of things jump...
Robert, A suggestion/(possible request) for double sided set-up. Would it be possible to have separate strategies (and tools) for the two sides? Basically a...
The generated .nc for Sherline needs to be fixed. It's now generating this: (TOOL/MILL,0.3750,0,1.0000,0.0) M6 T375 % (FILENAME: cb2b2.nc) STOCK/BLOCK, 6.500,...
Robert and Stewart I don't think this miss ordering of the first few lines is an error in the specific post file. I get the tool change lines before the start...
Stewart, Even though you don't seem to be losing steps try reducing the feed rate on Z in meshcam. I've got two mills with counter balanced heads. I sometimes...
... You can cheat a little here and use a smaller stock size, with appropriate offsets, to only cut the middle of the stock. It's hard to say without seeing...
I think this might have been a backlash problem. It was set very sloppy after I cleaned the mill. Thanks, Stewart ... evidence ... out. It ... Reducing ... ...
I checked the .con file and it was the same as the previous build. It does contain the error that mis-prints the STOCK/BLOCK line. Adding a '(' fixed that...
Many NEW JOBS are posted this week at www.netlifecareer.com REGISTER FREE & APPLY FAST Dear Candidate, This is to inform about the NEW JOBS posted at our...
I've had the same thought. I just bought a copy of OneCNC for my new company (Only for 2.5d work of course) and I'm thinking I'll copy their "NC Manager"...
Sorry- I didn't notice that the disribution has a dummy tools file that overwrites the current one. That won't happen again. Save is a frequently requested...
Robert, And all this time I thought I was the dummy for not always backing up support files before installing any upgrades, let alone beta test code ;-) Jeff ...
If you're counting on me to not make mistakes then you're in big big trouble. On the positive side, my software has never caused a computer to burst into...
SEND YOUR RESUME TO HR HEADS OF 500 LEADING COMPANIES & 500 PLACEMENT AGENCIES FOR FREE We, www.netlifecareer.com are glad to introduce our Free RESUME FLASH...
I took it out because it was so incomplete in 1.18 that it needed to be rewritten. I'll be putting it back in 2.0, but it will automatically generate all...
Well that's OK with me as long as you do plan to have it back in 2.0; I think it's a great feature and it should be part of your awesome piece of software! If...
When I import an STL, the Max Depth plane is set to the bottom of the geometry; which is great. However, I like the Program Zero to match the original CS of...
Believe it or not, that was done intentionally. My thought was that the maximum depth is an important parameter from a safety point of view. Since it's likely...
How difficult would it be to make this a toggle in the settings? Set the current method as the default and make the more elaborate option available to more...
Robert, I uploaded a picture file to the photos section with my name. This file is the C+ error message I receive when trying to run Meshcam 2023. The same...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
