I'm interested specifically to see how the WM55 compares to the Shure SM57, which is arguably the de facto standard for many live sound reinforcement...
... Yes, but not everything is capable of such.. A few notes I'd make as someone who's been starting to learn stuff in the speakerbuilding world.... Things...
Ken, OK. I'm going to tackle the WM-55 first (that suits my needs). Just to let you know what I will be doing, I'll outline the test procedure. I'll be...
Sorry if this isn't directly about Mic building; but I can't think of a better group of people to put this question to. I deperately need a stereo mic for...
How did you patch it into the mixer? Mixers have monophonic XLR inputs for microphones and that mike has a stereo XLR plug which is wired differently. That...
Thanks Eric, I'll be looking forward to it. Regards, John ... Just to let ... lot, and ... power for the ... has a ... borrow it. ... measurement. ... not at...
... Doing it close to the mic enhances any imbalance due to small difference in distance. I'd use some source that is repeatable and check it at a greater...
John, ... There's 2 AT models that have the same specs but wired differently: the 822 and the *25. Both have identical performance but the 825 costs more and...
Carlo, an inexpensive method is to couple a microphone capsule to a drugstore variety dual-earpiece stethoscope (commonly available in North America for under...
Thank you a lot Michael, Ičll try. -- carlo From: Michael Chang <m.chang@...> Reply-To: <micbuilders@yahoogroups.com> Date: Sun, 02 Jan 2005 13:10:00...
Suppose one wants to measure the LF response for a directional microphone at long distances.. Now, Isn't it the case that distance isn't really that important:...
Hans, Yes indeed. One could create a local simulation of a plane wave by using an array of loudspeakers. Part of the question is: Just how good does the ...
Med techs are some of the best audio engineers out there. Transducers they use put audio stuff to shame. Go to a local hospital and ask to talk to the med...
... Please keep it on list. My investigation of this method indicated serious problems terminating the tube at LF. One prof was using an active system with a...
I just got notice that they will ship today. I will announce when they arrive and what final prices are after I assign freight costs to units. The incoming...
... Hi folks, Merry after-Christmas and Happy rest-of-New Year. I did finally get around to taking the cover off my old battery-box and drawing it up. The...
Did a quick search in the micbuilder archives and didn't find any mention of this: http://users.rcn.com/rhcamp/ Follow the links to the MM2 and MM3 electret...
... I dunno... but I figure the cost of ordering them and re-shipping them doesn't make economic sense, unless one person handles it and there's enough volume;...
Mark, a cool adjunct to offering these capsules would be to also stock the 1 GOhm resistors needed for biasing and perhaps the FET's that are designed for...
... Not quite sure what you are looking for, Eric. Can you describe the requirements in a little more detail? Bob -- "Things should be described as simply as...
Bob, All I need to do is to create a shelf filter. Something that nominally would boost at 6 dB/octave below 800 Hz, down to say 80 Hz, so that would be 20 dB...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
