Are you sure you have the correct LED in the corrct place in the circuit?
could you have the charge LED and the power LED mixed up? I would double
check all your wiring with the schematic. It sounds like something is wired
wrong but I am not sure what. Does the robot work? Does the red LED only
come on when its charging?
--Scott

-----Original Message-----
From: mrrobot@yahoogroups.com [mailto:mrrobot@yahoogroups.com]On Behalf
Of lul_hs
Sent: Monday, January 09, 2006 12:56 PM
To: mrrobot@yahoogroups.com
Subject: [mrrobot] Re: power problem


Hi
I have tried anoter siwtch. But the same problem remains.
When turning the switch off a 3V pass to the red led and It lights
but when turning it ON a 5 volts pass to the led. I don't know what
is the problem. Is it from the kit itself??

Thanx lina

-
-- In mrrobot@yahoogroups.com, "Scott Jantz" <scott@m...> wrote:
>
> Your power switch is probably broken and because its on all the
time the
> batteries never charge. replace the power switch and it should
work fine
> after an all night charge.
> --Scott
>
> -----Original Message-----
> From: mrrobot@yahoogroups.com [mailto:mrrobot@yahoogroups.com]On
Behalf
> Of lul_hs
> Sent: Sunday, January 08, 2006 4:03 AM
> To: mrrobot@yahoogroups.com
> Subject: [mrrobot] power problem
>
>
> Hi all
> I have a TJPRO robot.
> It have a problem in the power. Either the power is on or it is off
> tjpro always receives a 3.6 voltage power and the red led is
always on.
> I would greatly appreciate it if any one can help me.
>
> Lina
>
>
>
>
>
> You are getting this e-mail because you subscribed and your
settings are set
> to receive a copy of all the messages. You can change your
preferences to
> "Web Only" by logging into your account.
> Yahoo! Groups Links
>






You are getting this e-mail because you subscribed and your settings are set
to receive a copy of all the messages. You can change your preferences to
"Web Only" by logging into your account.
Yahoo! Groups Links