Hi Jess,

I believe you will need to purchase the MB2325 or the USB2325
separately in order to connect the TJ Pro to your computer for
programming. If you plan on buying the USB2325, you can save money by
buying direct from here: http://www.dlpdesign.com/usb/txrx.shtml
instead of the mekatronix eBay store. The DLP-TXRX is what mekatronix
sells as the USB2325, the only difference is you will have to make
the four wire connector between the board and the robot- a very
simple thing to do. In either case you will have to buy the USB A to
5 pin Mini B adapter to connect the board to your computer, unless
you already have one lying around as these are the same adapters that
are used for many digital cameras and mp3 players...

Good luck,

Saleem


On Feb 19, 2007, at 4:49 PM, jess111rocks wrote:

> im wondering if the proper hardware comes with the Talrik Junior Pro
> to do programing
>
>
>
>
> Yahoo! Groups Links
>
>
>