Hello, This is my first time posting here. A friend of mine is looking for a robotic solution for his business idea; need to place a biomedical device in 3D...
Hey Guys... I'd like to test the servos on my TJPro. Is it possible to connect just a power source (like some NMh) to the servos and make them run? Thanks, ...
No they need a pulse train to run. There should be an example program that will send them to the center position included with your robot. Perhaps hservo.c? ...
Scott Jantz
scott@...
Aug 17, 2005 11:18 pm
1533
Hey Scott, Thanks for the reply. I wanted to know if it?s possible to test the motors without going through connecting them to the processor. Please let me...
HI I NEEDED TO INTERFACE MY PC TO EXTERNAL CICUIT THROUGH ITS PARELLEL PORT USING 'C'LANGUAGE .CAN YOU PROVIDE DETAIL INFORMATION ABOUT IT . THANK YOU...
hi in 'C' there's one function called 'outp' ok syntax outp(portnumber,data) use it and send it to the parallel port the port addres is 378 this is hex value ...
they need the processor to turn on. with just power connected they will just sit there. --Scott ... --...
scott@...
Aug 22, 2005 8:48 pm
1537
We have an applicaton that would involve two Ultrasonic Sensors. The sensor's analog output is perfect for our needs. Here is what we need to do: Have Sensor...
I think the digital version can do this since there is a trigger input. However the analog version is not (easily) capable of this. However it might be worth...
Scott Jantz
scott@...
Oct 4, 2005 1:40 am
1539
Scott: Thanks much. I just noticed that there is a digital option. If the digital version can trigger a ping on one sensor and receive on the other, perhaps...
I am reading about the "LEGO MINDSTORMS Robotics Invention System 2.0", and I think that I want it to begin my project but I have some question I hope that you...
You can do a number of things with the LEGO, but your ambitious statements suggest to me that you might want to try Mekatronix's new MEKAVR128 microcontroller...
jack north
jack@...
Oct 28, 2005 4:15 pm
1542
can anyone kindly give me a help as to which program/software i will use for my robot. i have existing prog11 and high speed downloader. is there anything else...
What robot do you have? jack ... From: "jt_tejada" <jt_tejada@...> To: <mrrobot@yahoogroups.com> Sent: Thursday, November 10, 2005 5:48 AM Subject:...
jack north
jack@...
Nov 15, 2005 9:54 pm
1544
jack, Actually i have 5 pieces of TJ PRO robot. We offered these as a project for the school and they are asking me to demonstrate or to make a program...
First, go to www.mekatronix.com ->Manuals and download the TJ Pro robot Assembly Manual and the Users Manual. That will get you started. You can also buy...
jack north
jack@...
Nov 21, 2005 12:59 am
1546
Hi, I have a TJPro and I use XP for downloading. You must change the compatibility in properties. Check the check box of Run this program in compatible with...
Hi all, I have a tjpro and I am working in my graduation project. I use the ICC11 compiler. I have some difficulty in compiling. The robot with the software is...
You will need ICC-11 compiler (www.mrrobot.com) or the equivalent freeware version. The former is supported and might be easier for you to get started. jack ...
jack north
jack@...
Dec 20, 2005 6:02 am
1549
Hi jack, i already have the TJ pro assembly manual and user manual. I am already reading it. They have ask me on how to install PROGO11? there is a filename...
Hi all I have a TJPRO robot. It have a problem in the power. Either the power is on or it is off tjpro always receives a 3.6 voltage power and the red led is...
Your power switch is probably broken and because its on all the time the batteries never charge. replace the power switch and it should work fine after an all...
Scott Jantz
scott@...
Jan 8, 2006 6:45 pm
1552
how do i install Progo11?? I found out that there is no "comprogo.bat".ld appreciate your help regarding my project. thanks a lot....
Hi I have tried anoter siwtch. But the same problem remains. When turning the switch off a 3V pass to the red led and It lights but when turning it ON a 5...
Are you sure you have the correct LED in the corrct place in the circuit? could you have the charge LED and the power LED mixed up? I would double check all...
Scott Jantz
scott@...
Jan 10, 2006 11:18 am
1555
... Hi Lina Actually, I have never see the TJPRO Robot. But maybe I can give u some rechecking ask. What did u mean " either the power is on or it is off"? Is...
I have checked the connections, used a new power switch and checked for any short but it does not work. I am working on my graduation project and we are two...
hi everyone, I have this PROGO11 software. In the manual, there is a filename "comprogo.bat" but in my file the filename is "installprogo" which is MS-DOS...
Hi I have tried anoter siwtch. But the same problem remains. When turning the switch off a 3V pass to the red led and It lights but when turning it ON a 5...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
