Somehow you are not connecting to the right serial port.  When you download
the P-code the lights should blink rapidly.  Check to make sure you are
connected to the same serial port you have configured IC to use.
--Scott

-----Original Message-----
From: mrrobot@yahoogroups.com [mailto:mrrobot@yahoogroups.com]On Behalf
Of wrightski1
Sent: Saturday, March 25, 2006 1:30 AM
To: mrrobot@yahoogroups.com
Subject: [mrrobot] Re: Download of Pcode won't initiate


D2 blinks ON and OFF whether or not I "OK" the download from ICWIN.
In other words, I don't see a difference in the blinking from before
I "OK" the download to after I "OK" the download. I do get a timeout
error from the IC.

MW


--- In mrrobot@yahoogroups.com, "Scott Jantz" <scott@...> wrote:
>
> Do you get blinking lights during the download?  Do you get an
error from
> IC?
> --Scott
>
> -----Original Message-----
> From: mrrobot@yahoogroups.com [mailto:mrrobot@yahoogroups.com]On
Behalf
> Of wrightski1
> Sent: Friday, March 10, 2006 12:24 AM
> To: mrrobot@yahoogroups.com
> Subject: [mrrobot] Download of Pcode won't initiate
>
>
> With my TJPRO connected to a PC from Com1 to a MB2325A through the
> Ribbon Cable, I cannot get the pcode download to start.
>
> -The Power Switch is ON, and the Download/Run is in the Download
position.
> -D1 is ON and D2 goes ON when I press the Reset. However, when I
> release the Reset, D2 blinks ON and OFF whether or not I "OK" the
> download from ICWIN.
> What might not be working?
>
> Also, I cannot find documentation describing the COM settings on the
> PC. I currently have 8N1 None at 9600 Baud. Is that supposed to
work?
>
> Thanks
> MW
>
>
>
>
>
>
> You are getting this e-mail because you subscribed and your
settings are set
> to receive a copy of all the messages. You can change your
preferences to
> "Web Only" by logging into your account.
> Yahoo! Groups Links
>






You are getting this e-mail because you subscribed and your settings are set
to receive a copy of all the messages. You can change your preferences to
"Web Only" by logging into your account.
Yahoo! Groups Links

D2 blinks ON and OFF whether or not I "OK" the download from ICWIN.
In other words, I don't see a difference in the blinking from before
I "OK" the download to after I "OK" the download. I do get a timeout
error from the IC.

MW


--- In mrrobot@yahoogroups.com, "Scott Jantz" <scott@...> wrote:
>
> Do you get blinking lights during the download?  Do you get an
error from
> IC?
> --Scott
>
> -----Original Message-----
> From: mrrobot@yahoogroups.com [mailto:mrrobot@yahoogroups.com]On
Behalf
> Of wrightski1
> Sent: Friday, March 10, 2006 12:24 AM
> To: mrrobot@yahoogroups.com
> Subject: [mrrobot] Download of Pcode won't initiate
>
>
> With my TJPRO connected to a PC from Com1 to a MB2325A through the
> Ribbon Cable, I cannot get the pcode download to start.
>
> -The Power Switch is ON, and the Download/Run is in the Download
position.
> -D1 is ON and D2 goes ON when I press the Reset. However, when I
> release the Reset, D2 blinks ON and OFF whether or not I "OK" the
> download from ICWIN.
> What might not be working?
>
> Also, I cannot find documentation describing the COM settings on the
> PC. I currently have 8N1 None at 9600 Baud. Is that supposed to
work?
>
> Thanks
> MW
>
>
>
>
>
>
> You are getting this e-mail because you subscribed and your
settings are set
> to receive a copy of all the messages. You can change your
preferences to
> "Web Only" by logging into your account.
> Yahoo! Groups Links
>

Hi,

I am buying the MTJPRO11 microcontroller board and I was looking for software
for Mac OS
X: Both an assembler/compiler and a program for downloading programs to the
board. Does
anyone have any recommedations?

Much obliged if you can help me out...

order 2 more servos from www.mrrobot.com you can get them already hacked so
you can just plug them in.
--Scott

-----Original Message-----
From: mrrobot@yahoogroups.com [mailto:mrrobot@yahoogroups.com]On Behalf
Of youakome
Sent: Wednesday, March 15, 2006 8:12 AM
To: mrrobot@yahoogroups.com
Subject: [mrrobot] help us...urgent...WE accidentally BURNED THE BOARD
ON THE SERVO...




    we were able to make tjpro run...the motors were completely
working...but we wanted to change the motors rotation to the other
side so we INTERCHANGED the red and black wires on the motor...

    it burned the board...the part with number 2216W got burned...
please help us...our deadline is on the 25th...


    thanks!








You are getting this e-mail because you subscribed and your settings are set
to receive a copy of all the messages. You can change your preferences to
"Web Only" by logging into your account.
Yahoo! Groups Links

That is incorrect you need the board back.  The manual does not say to
remove the board.
--Scott

-----Original Message-----
From: mrrobot@yahoogroups.com [mailto:mrrobot@yahoogroups.com]On Behalf
Of youakome
Sent: Monday, March 13, 2006 10:26 AM
To: mrrobot@yahoogroups.com
Subject: [mrrobot] we followed all the instructions in the servo hack...




     YES we are using tjpro...we followed the manual...it said unsolder
the motor from the board and we did...we left only the gears and
potentiometer inside...solder wires to the motor...but plugging it to
the microprocessor makes the motor run without servo_on() command...it
couldn't be stopped either...

     did we do the right thing?   or we do have to put the board back?


thanks!







You are getting this e-mail because you subscribed and your settings are set
to receive a copy of all the messages. You can change your preferences to
"Web Only" by logging into your account.
Yahoo! Groups Links

    did we do the right thing?   or we do have to put the board back?

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

we were able to make tjpro run...the motors were completely
working...but we wanted to change the motors rotation to the other
side so we INTERCHANGED the red and black wires on the motor...

    it burned the board...the part with number 2216W got burned...
please help us...our deadline is on the 25th...


    thanks!

YES we are using tjpro...we followed the manual...it said unsolder
the motor from the board and we did...we left only the gears and
potentiometer inside...solder wires to the motor...but plugging it to
the microprocessor makes the motor run without servo_on() command...it
couldn't be stopped either...

     did we do the right thing?   or we do have to put the board back?


thanks!

Are you sure you did the right servo hack? You have to leave the electronics
inside if you
are using it with the TJ Pro robot.


--- In mrrobot@yahoogroups.com, "youakome" <youakome@...> wrote:
>
>
>    what do you mean? what is the pot?
>
>    we hacked the servo by removing the board attached to it and
> burning the inside of the bottom part, of the largest gear so to
> remove the thing that makes the potentiometer turn..now it freely
> turns when the motor is on...we tried running the motor using
> batteries, its working...
>
>    we attached the motor now to the board at PA3 and PA7...when we
> turn on the microprocessor the motor turns on too...the servo_off()
> and motorp(0,0) and motorp(1,0) doesn't stop the motor from turning...
>
>
>    that's the only problem we have, the IR's and bumper sensors are
> working...
>
>    thanks!!
>

what do you mean? what is the pot?

    we hacked the servo by removing the board attached to it and
burning the inside of the bottom part, of the largest gear so to
remove the thing that makes the potentiometer turn..now it freely
turns when the motor is on...we tried running the motor using
batteries, its working...

    we attached the motor now to the board at PA3 and PA7...when we
turn on the microprocessor the motor turns on too...the servo_off()
and motorp(0,0) and motorp(1,0) doesn't stop the motor from turning...


    that's the only problem we have, the IR's and bumper sensors are
working...

    thanks!!

Do you get blinking lights during the download?  Do you get an error from
IC?
--Scott

-----Original Message-----
From: mrrobot@yahoogroups.com [mailto:mrrobot@yahoogroups.com]On Behalf
Of wrightski1
Sent: Friday, March 10, 2006 12:24 AM
To: mrrobot@yahoogroups.com
Subject: [mrrobot] Download of Pcode won't initiate


With my TJPRO connected to a PC from Com1 to a MB2325A through the
Ribbon Cable, I cannot get the pcode download to start.

-The Power Switch is ON, and the Download/Run is in the Download position.
-D1 is ON and D2 goes ON when I press the Reset. However, when I
release the Reset, D2 blinks ON and OFF whether or not I "OK" the
download from ICWIN.
What might not be working?

Also, I cannot find documentation describing the COM settings on the
PC. I currently have 8N1 None at 9600 Baud. Is that supposed to work?

Thanks
MW






You are getting this e-mail because you subscribed and your settings are set
to receive a copy of all the messages. You can change your preferences to
"Web Only" by logging into your account.
Yahoo! Groups Links

With my TJPRO connected to a PC from Com1 to a MB2325A through the
Ribbon Cable, I cannot get the pcode download to start.

-The Power Switch is ON, and the Download/Run is in the Download position.
-D1 is ON and D2 goes ON when I press the Reset. However, when I
release the Reset, D2 blinks ON and OFF whether or not I "OK" the
download from ICWIN.
What might not be working?

Also, I cannot find documentation describing the COM settings on the
PC. I currently have 8N1 None at 9600 Baud. Is that supposed to work?

Thanks
MW

make sure you centered the pot inside the servo.
--Scott

-----Original Message-----
From: mrrobot@yahoogroups.com [mailto:mrrobot@yahoogroups.com]On Behalf
Of youakome
Sent: Wednesday, March 08, 2006 3:07 AM
To: mrrobot@yahoogroups.com
Subject: [mrrobot] direct connection to the battery makes the motor on
without command...



    hello,

          we tried to put a wire from the battery to PA3-PA7...the
motor is running even without the servo_on() command...without the
wire, the PA3-PA7 has no voltage...how can we fix this?



    thanks...







You are getting this e-mail because you subscribed and your settings are set
to receive a copy of all the messages. You can change your preferences to
"Web Only" by logging into your account.
Yahoo! Groups Links

hi anyone,

        we have a new problem...the motor is already on when we plug
the female connector to PA3 & PA7...typing the commands servo_off() or
motorp(0,0) doesn't stop the motor...how can we fix this?


    thanks!!

hello,

          we tried to put a wire from the battery to PA3-PA7...the
motor is running even without the servo_on() command...without the
wire, the PA3-PA7 has no voltage...how can we fix this?



    thanks...

I was wondering how do we download our assembly code onto
the MC68HC11 processor board for the TJPro the interface is just not
working for us.

A common problem is a short on the battery lines connected to the servos
PA3-PA7 blows the trace from the battery.  You should just be able to solder
a wire from the battery supply to that power rail from PA3-PA7 to fix the
board.
--Scott

-----Original Message-----
From: mrrobot@yahoogroups.com [mailto:mrrobot@yahoogroups.com]On Behalf
Of youakome
Sent: Wednesday, March 01, 2006 7:32 AM
To: mrrobot@yahoogroups.com
Subject: [mrrobot] Plz help me....deadline for school project is march
25th...no voltage on PA3-PA7



    hello,

         we bought tjpropa last dec 2005 from your store...
         we have hacked the servo and followed all instructions in the
manual but the servo still doesn't run when connected to the board...
         our deadline for the robot is on the 25 & it has to work or
else we'll flank in our subject...we detected that there was no
voltage on PA3 - PA7 on the board but the rest of the pins have...is
the board defective?  or what should we do for the servo to run?


     Thank you so much!!!


    mhynet






You are getting this e-mail because you subscribed and your settings are set
to receive a copy of all the messages. You can change your preferences to
"Web Only" by logging into your account.
Yahoo! Groups Links

hello,

         we bought tjpropa last dec 2005 from your store...
         we have hacked the servo and followed all instructions in the
manual but the servo still doesn't run when connected to the board...
         our deadline for the robot is on the 25 & it has to work or
else we'll flank in our subject...we detected that there was no
voltage on PA3 - PA7 on the board but the rest of the pins have...is
the board defective?  or what should we do for the servo to run?


     Thank you so much!!!


    mhynet

You need the batch file. Open it to edit to see what it does. Progo.c is
also needed.

If you purchased PROGO11in your bundle, you should have gotten the manual
and the download procedure. Notify me directly of your invoice number for
proof of purchase and I can send the missing emanual which should answer all
your questions. Mail your invoice number directly to jack@.... DO
NOT reply to this on YAHOOGROUPS.

jack
###
----- Original Message -----
From: "jt_tejada" <jt_tejada@...>
To: <mrrobot@yahoogroups.com>
Sent: Thursday, December 29, 2005 6:30 AM
Subject: [mrrobot] Re: program needed for my new robot


> Hi jack,
>
>    i already have the TJ pro assembly manual and user manual. I am
> already reading it. They have ask me on how to install PROGO11? there
> is a filename "progo.c"(C FILE) and "installprogo"(MS DOS BATCHFILE).
> Do i need this programs?
>
> What I have installed are INTERACTIVE C, HIGHSPEED DOWNLOADER AND
> ICCv15WIN. Is there anything else missing? how about PROGO11?
>
>
> --- In mrrobot@yahoogroups.com, "jack north" <jack@m...> wrote:
> >
> > First, go to www.mekatronix.com ->Manuals and download the TJ Pro
> robot
> > Assembly Manual and the Users Manual. That will get you started.
> You can
> > also buy source C-Language application programs from
> www.mrrobot.com . This
> > should get you started.
> >
> > jack
> > ###
> > ----- Original Message -----
> > From: "jt_tejada" <jt_tejada@y...>
> > To: <mrrobot@yahoogroups.com>
> > Sent: Thursday, November 17, 2005 1:54 PM
> > Subject: [mrrobot] Re: program needed for my new robot
> >
> >
> > > jack,
> > >
> > >   Actually i have 5 pieces of TJ PRO robot. We offered  these as a
> > > project for the school and they are asking me to demonstrate or to
> > > make a program regarding these. I don't know where to start.
> kindly
> > > help me regarding these matter. your help will be most welcome.
> > >
> > > thanks.
> > >
> > > joseph
> > >
> > > --- In mrrobot@yahoogroups.com, "jack north" <jack@m...> wrote:
> > > >
> > > > What robot do you have?
> > > >
> > > > jack
> > > > ###
> > > > ----- Original Message -----
> > > > From: "jt_tejada" <jt_tejada@y...>
> > > > To: <mrrobot@yahoogroups.com>
> > > > Sent: Thursday, November 10, 2005 5:48 AM
> > > > Subject: [mrrobot] program needed for my new robot
> > > >
> > > >
> > > > > can anyone kindly give me a help as to which program/software
> i
> > > will
> > > > > use for my robot. i have existing prog11 and high speed
> > > downloader.
> > > > > is there anything else i have to buy?
> > > > >
> > > > > thanks
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > You are getting this e-mail because you subscribed and your
> > > settings are
> > > > set to receive a copy of all the messages. You can change your
> > > preferences
> > > > to "Web Only" by logging into your account.
> > > > > Yahoo! Groups Links
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > You are getting this e-mail because you subscribed and your
> settings are
> > set to receive a copy of all the messages. You can change your
> preferences
> > to "Web Only" by logging into your account.
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
>
>
>
>
>
>
>
> You are getting this e-mail because you subscribed and your settings are
set to receive a copy of all the messages. You can change your preferences
to "Web Only" by logging into your account.
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>

can anybody know where to download POGOv13?

thanks

Does anyone had a POGOv13 software? how do i download it?

thanks.

joseph.

It sounds like the other group may have damaged the controller board.  You
can either send it to us for repair or purchase a new controller board.

For repair please include a check when shipping your robot for $60 ($50
repair fee and $10 S&H) this fee will cover most problems to:

Mekatronix Repairs
6417 NW 53rd terrace
Gainesville FL 32653



-----Original Message-----
From: mrrobot@yahoogroups.com [mailto:mrrobot@yahoogroups.com]On Behalf
Of lul_hs
Sent: Thursday, January 12, 2006 5:31 PM
To: mrrobot@yahoogroups.com
Subject: [mrrobot] Re: power problem


I have checked the connections, used a new power switch and checked
for any short but it does not work.
I am working on my graduation project and we are two groups working
on the same robot. The robot was working before, but when it
returned to us the last time It came with this problem.
I don't know what is the reason.

--- In mrrobot@yahoogroups.com, hari prasad <sayhaihari@y...> wrote:
>
>
> actually
>   there may be any short between the phase supply and the led
voltage ok
>   kindly plz check it
>   and say me wats the fault ok dnt forget
> lul_hs <lul_hs@y...> wrote:
>   Hi all
> I have a TJPRO robot.
> It have a problem in the power. Either the power is on or it is
off
> tjpro always receives a 3.6 voltage power and the red led is
always on.
> I would greatly appreciate it if any one can help me.
>
> Lina
>
>
>
>
>
> You are getting this e-mail because you subscribed and your
settings are set to receive a copy of all the messages. You can
change your preferences to "Web Only" by logging into your account.
>
>
>
>   SPONSORED LINKS
>         Online mechanical engineering degree   Mechanical
engineering degree online   Mechanical engineering     Mechanical
engineering class   Mechanical engineering information   Mechanical
engineering degree
>
> ---------------------------------
>   YAHOO! GROUPS LINKS
>
>
>     Visit your group "mrrobot" on the web.
>
>     To unsubscribe from this group, send an email to:
>  mrrobot-unsubscribe@yahoogroups.com
>
>     Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
> ---------------------------------
>
>
>
>
>
> Send instant messages to your online friends
http://in.messenger.yahoo.com
>






You are getting this e-mail because you subscribed and your settings are set
to receive a copy of all the messages. You can change your preferences to
"Web Only" by logging into your account.
Yahoo! Groups Links

Your power switch is probably broken and because its on all the time the
batteries never charge.  replace the power switch and it should work fine
after an all night charge.
--Scott

-----Original Message-----
From: mrrobot@yahoogroups.com [mailto:mrrobot@yahoogroups.com]On Behalf
Of lul_hs
Sent: Sunday, January 08, 2006 4:03 AM
To: mrrobot@yahoogroups.com
Subject: [mrrobot] power problem


Hi all
I have a TJPRO robot.
It have a problem in the power. Either the power is on or it is off
tjpro always receives a 3.6 voltage power and the red led is always on.
I would greatly appreciate it if any one can help me.

Lina





You are getting this e-mail because you subscribed and your settings are set
to receive a copy of all the messages. You can change your preferences to
"Web Only" by logging into your account.
Yahoo! Groups Links

hi everyone,

     I have this PROGO11 software. In the manual, there is a
filename "comprogo.bat" but in my file the filename is "installprogo"
which is MS-DOS Batch File. Is this the same?

     hoping for your quick response.

I have checked the connections, used a new power switch and checked
for any short but it does not work.
I am working on my graduation project and we are two groups working
on the same robot. The robot was working before, but when it
returned to us the last time It came with this problem.
I don't know what is the reason.

--- In mrrobot@yahoogroups.com, hari prasad <sayhaihari@y...> wrote:
>
>
> actually
>   there may be any short between the phase supply and the led
voltage ok
>   kindly plz check it
>   and say me wats the fault ok dnt forget
> lul_hs <lul_hs@y...> wrote:
>   Hi all
> I have a TJPRO robot.
> It have a problem in the power. Either the power is on or it is
off
> tjpro always receives a 3.6 voltage power and the red led is
always on.
> I would greatly appreciate it if any one can help me.
>
> Lina
>
>
>
>
>
> You are getting this e-mail because you subscribed and your
settings are set to receive a copy of all the messages. You can
change your preferences to "Web Only" by logging into your account.
>
>
>
>   SPONSORED LINKS
>         Online mechanical engineering degree   Mechanical
engineering degree online   Mechanical engineering     Mechanical
engineering class   Mechanical engineering information   Mechanical
engineering degree
>
> ---------------------------------
>   YAHOO! GROUPS LINKS
>
>
>     Visit your group "mrrobot" on the web.
>
>     To unsubscribe from this group, send an email to:
>  mrrobot-unsubscribe@yahoogroups.com
>
>     Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
> ---------------------------------
>
>
>
>
>
> Send instant messages to your online friends
http://in.messenger.yahoo.com
>

Hi all
I have a TJPRO robot.
It have a problem in the power. Either the power is on or it is off
tjpro always receives a 3.6 voltage power and the red led is always on.
I would greatly appreciate it if any one can help me.

Lina

Send instant messages to your online friends http://in.messenger.yahoo.com

--- lul_hs <lul_hs@...> wrote:

> Hi all
> I have a TJPRO robot.
> It have a problem in the power. Either the power is
> on or it is off
> tjpro always receives a 3.6 voltage power and the
> red led is always on.
> I would greatly appreciate it if any one can help
> me.
>
> Lina
>


Hi Lina

Actually, I have never see the TJPRO Robot. But maybe
I can give u some rechecking ask. What did u mean "
either the power is on or it is off"? Is there any
power switch? The switch could have broken, so it's
always ON and the red LED always ON too.

But if there isn't any power switch, i can;t help u.

Well. u can try it.



__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

Are you sure you have the correct LED in the corrct place in the circuit?
could you have the charge LED and the power LED mixed up?   I would double
check all your wiring with the schematic.  It sounds like something is wired
wrong but I am not sure what.  Does the robot work?  Does the red LED only
come on when its charging?
--Scott

-----Original Message-----
From: mrrobot@yahoogroups.com [mailto:mrrobot@yahoogroups.com]On Behalf
Of lul_hs
Sent: Monday, January 09, 2006 12:56 PM
To: mrrobot@yahoogroups.com
Subject: [mrrobot] Re: power problem


Hi
I have tried anoter siwtch. But the same problem remains.
When turning the switch off a 3V pass to the red led and It lights
but when turning it ON a 5 volts pass to the led. I don't know what
is the problem. Is it from the kit itself??

Thanx lina

-
-- In mrrobot@yahoogroups.com, "Scott Jantz" <scott@m...> wrote:
>
> Your power switch is probably broken and because its on all the
time the
> batteries never charge.  replace the power switch and it should
work fine
> after an all night charge.
> --Scott
>
> -----Original Message-----
> From: mrrobot@yahoogroups.com [mailto:mrrobot@yahoogroups.com]On
Behalf
> Of lul_hs
> Sent: Sunday, January 08, 2006 4:03 AM
> To: mrrobot@yahoogroups.com
> Subject: [mrrobot] power problem
>
>
> Hi all
> I have a TJPRO robot.
> It have a problem in the power. Either the power is on or it is off
> tjpro always receives a 3.6 voltage power and the red led is
always on.
> I would greatly appreciate it if any one can help me.
>
> Lina
>
>
>
>
>
> You are getting this e-mail because you subscribed and your
settings are set
> to receive a copy of all the messages. You can change your
preferences to
> "Web Only" by logging into your account.
> Yahoo! Groups Links
>






You are getting this e-mail because you subscribed and your settings are set
to receive a copy of all the messages. You can change your preferences to
"Web Only" by logging into your account.
Yahoo! Groups Links

Hi
I have tried anoter siwtch. But the same problem remains.
When turning the switch off a 3V pass to the red led and It lights
but when turning it ON a 5 volts pass to the led. I don't know what
is the problem. Is it from the kit itself??

Thanx lina

-
-- In mrrobot@yahoogroups.com, "Scott Jantz" <scott@m...> wrote:
>
> Your power switch is probably broken and because its on all the
time the
> batteries never charge.  replace the power switch and it should
work fine
> after an all night charge.
> --Scott
>
> -----Original Message-----
> From: mrrobot@yahoogroups.com [mailto:mrrobot@yahoogroups.com]On
Behalf
> Of lul_hs
> Sent: Sunday, January 08, 2006 4:03 AM
> To: mrrobot@yahoogroups.com
> Subject: [mrrobot] power problem
>
>
> Hi all
> I have a TJPRO robot.
> It have a problem in the power. Either the power is on or it is off
> tjpro always receives a 3.6 voltage power and the red led is
always on.
> I would greatly appreciate it if any one can help me.
>
> Lina
>
>
>
>
>
> You are getting this e-mail because you subscribed and your
settings are set
> to receive a copy of all the messages. You can change your
preferences to
> "Web Only" by logging into your account.
> Yahoo! Groups Links
>

how do i install Progo11?? I found out that there is
no "comprogo.bat".ld appreciate your help regarding my project.
thanks a lot.