mrtg : Messages : 35053-35082 of 36905

Messages: Simplify \| Expand (Group by Topic)		Author	Sort by Date

35053	http://www.geocities.com/mrtg_daemon/Main.html This is what I use. You have to create a .Bat file with something like this: Rem #########################...	Alegria, Luis lalegria@...	Oct 1, 2004 1:31 pm
35054	http://www.geocities.com/mrtg_daemon/Main.html This is what I use. You have to create a .Bat file with something like this: Rem #########################...	Alegria, Luis lalegria@...	Oct 1, 2004 1:32 pm
35055	Is anyone out there graphing statistics off a service policy on a Cisco 7200 router? I'd like to create graphs for the number of dropped packets on my VOIP...	Winter, R. Stephen SWinter@...	Oct 1, 2004 3:45 pm
35056	Hello, Little question, is possible anyway monitoring negative value with mrtg without using rrdtool ? /Tomi -- Unsubscribe...	Tomi bascom@...	Oct 2, 2004 10:07 pm
35057	... Nope, not unless you know it won't ever go below some value and want to do something like `<value> + 100` and then remember to read the graph as +100 over...	Bill Wichers billw@...	Oct 3, 2004 7:33 pm
35058	Hi hope someone can help me with this. I'm trying to monitor memory usage on a compaq server but I am getting the following error message. 2004-10-04 09:52:10...	Mark Egan egan_mark@...	Oct 4, 2004 11:35 am
35059	If its always going to be negative, you could do "<value> * -1" to invert the value, and then always remember thats inverted. But yeah, rrdtool.... Andrew ......	Andrew Hull list@...	Oct 4, 2004 3:04 pm
35060	Hello there, Can some one tell me how to get some stuff sorted out. There are some things i would like to be viewed on one page of statics. - Only 1 daily...	i @ downfire i@...	Oct 4, 2004 7:03 pm
35061	... Suppress By default mrtg produces 4 graphs. With this option you can suppress the generation of selected graphs. The option value syntax is analogous to ...	Eric Brander Eric_Mailing_List@...	Oct 4, 2004 7:54 pm
35062	When I walk those MIB's using GETIF I get a return value of -1 on them. I usually get memory statistics based on the OS. Michael Wren Senior Network Analyst ...	Mike Wren mwren@...	Oct 4, 2004 9:12 pm
35063	I am having a great deal of trouble rec'ing snmp info from my snmp enamble devices. I can query the loacalhost no problem but when i send a request to my...	Michael Di Martino mdm@...	Oct 4, 2004 11:05 pm
35064	... Try Indexmaker, that puts one of each target on a single page Peter -- Unsubscribe mailto:mrtg-request@...?subject=unsubscribe Archive...	Peter Glanville peter_glanville@...	Oct 5, 2004 7:58 am
35065	are perl and active perl different? if it is, what typical differencies of them? but if not, what the similarty? thx, welly ... Do you Yahoo!? New and Improved...	welly limston well_great2004@...	Oct 5, 2004 11:36 am
35066	Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hello, =20 Our link capacity is 1,5 Mb but MRTG results are as shown...	Meral KESKINER MeralK@...	Oct 5, 2004 2:28 pm
35067	... What exactly where you hoping for? It looks like 137,000 bytes per second is roughly 10 percent of a 1,500,000 bytes per second link? Other than not doing...	PAUL WILLIAMSON pwilliamson@...	Oct 5, 2004 2:35 pm
35068	MRTG is doing what it was told to do and is graphing accurately in Bytes. Network throughput is typically measured in bits (thus the 1.5 Mb). If you would...	William Owen William.Owen@...	Oct 5, 2004 2:39 pm
35069	... It probably is a 1.5 Mbps link (not 1.5 MBps). Then again, that would be 185.5 kBps which is still more than 137.5 kBps. ... Perhaps some form of traffic...	Alex van den Bogaerdt alex@...	Oct 5, 2004 2:56 pm
35070	... There are a couple of things that could be wrong, but you cut off the top of the page where the relevant stuff is. If the link is 1500k bits, then the...	Jay Hennigan jay@...	Oct 5, 2004 4:45 pm
35071	Hey Everyone, I've been trying to setup CAR monitoring, the rate-limit is all setup but I can't seem to grab the snmp info using mrtg. I've searched through...	John M. Livingston john@...	Oct 5, 2004 6:53 pm
35072	ActivePerl is the version of Perl maintained by ActiveState, mainly for the Windows platform (though I think they've now release *nix versions too). As far as...	Craig Humphrey Craig.Humphrey@...	Oct 5, 2004 8:36 pm
35073	I am having a problem setting up MRTG on ISA server 2000. I can use Getif 2.3.1 and it will show that the isa server is reachable via SNMP. Yet when I try a...	rglauser@...	Oct 5, 2004 8:49 pm
35074	Is your SNMP poll/walk/whatever from Solarwinds on the same UDP port as GetIf? Or does it poll on another port? Can you use Solarwindws to poll another...	Garth Williams garth.williams@...	Oct 5, 2004 10:00 pm
35075	Yes the solarwinds mib walker is polling on UDP port 161 and can successfully poll other serers. ... Sent from my BlackBerry Wireless Handheld ... From: Garth...	rglauser@...	Oct 5, 2004 10:07 pm
35076	Is Solarwinds on another server than GetIf? If so, then perhaps the SNMP service on the target is set to allow SNMP access from the Getif server and not the...	Garth Williams garth.williams@...	Oct 5, 2004 10:12 pm
35077	Neither mib walker is on a server. One is on W2K pro and the other XP. I am not aware of any way to place an ACL on the snmp service running on a server. ... ...	rglauser@...	Oct 5, 2004 10:40 pm
35078	http://www.loriotpro.com/Service&Support/How_to/InstallWXPAgent_EN.php * Neither mib walker is on a server. One is on W2K pro and the other XP. I am not aware...	Garth Williams garth.williams@...	Oct 5, 2004 10:58 pm
35079	Hello, I'v got a bit of a problem. I'v made a script so i can see in a graph how many bytes got in and got out. This works, but the problem is that the graph...	i @ downfire i@...	Oct 6, 2004 1:59 am
35080	You might want to check your SNMP service configuration. By default, Win2k and Win2k3 server will respond to only to hosts listed in the security tab ...	William Owen William.Owen@...	Oct 6, 2004 2:40 pm
35081	I have checked the SNMP service configuration. I have tested it with listed hosts and with "from any hosts." I have made sure that the xp firewall is disabled....	rglauser@...	Oct 6, 2004 3:28 pm
35082	I tried running getif on the ISA server itself and there was no response at all. I suspect that it has to do with security settings within ISA itself, or...	rglauser@...	Oct 6, 2004 4:23 pm

Yahoo! Groups Tips

Did you know...

Messages

Yahoo! My Yahoo! Mail
	Sign In New User? Sign Up
		Tech - Groups - Help

Yahoo! Groups Tips

Did you know...

Best of Y! Groups

Messages