... M-Audio do a nice little 2-input mic preamp which is much smaller than the smallest Mackie mixer. If your phantom power requirements are not critical you...
A new transport and updated electronics. I would have to dig out the bill to be exact. The main problem I was having was the playing would not read my recorded...
thesroband@... wrote: A new transport and updated electronics. I would have to dig out the bill to be exact. The main problem I was having was the playing...
Were you using phantom power at the time? The MD8s (some of them, at least) have a flaw that fries the board for a channel input when you use phantom power....
How do I remove myself from this group? _________________________ PARAGONE :::... Celestial Nations ::... Celestial <http://www.celestialproductions.com>...
Hi, I am new to this group and would appreciate some advice please. I have recently purchased to MDM-x4s - is it possible to link them together via midi to end...
Hi Was wondering if anybody knows what the procedure is for linking a MD8 to a computer using the 8 direct outs rather than using the stereo out. I know you...
3392
pch
pcheddie@...
Jul 26, 2003 2:56 pm
straight to your sound card. whatever kind you have. out on the MD8 to the in on your computers sound card. nothing fancy ED E ... From: hoteldreamer03...
... or ... I'm sorry for adding to this already seemingly hopeless thread, yet... I just bought my MDM-X4 from someone on ebay. Now before I hop a flight and...
... See if you can find a lens cleaner and that might help. If this happens on more than one disk, then it seems to be a drive problem. ... Under any...
... or just ... Under ANY circumstances... I can't monitor my input even when I'm not recording. Are there lens cleaners sold that work exclusively with the MD...
... Ok, then if nothing shows up with the pan pots tweaked to the right channel, meter or monitor or line output, then the channel is dead at some point on the...
Go to minidisco.com to purchase head cleaner and lens cleaner discs. They both need to be used to clean properly. Good luck. Duane in so. fl. ... From:...
Hi Guys, great to read about all the new and exciting technology that out there. i have a simple question to ask about MD's. i have recording equipment and...
... Stereo, Monitor or Line Out to Line In, using the proper cable (2 RCAs > 1 miniplug) Use some sort of recording software -- there are millions, incuding a...
... As I understand NetMD, you are not allowed to do an upload to your PC, because obviously, anything you recorded on MD without the accompanying CD is...
Check this device out. Might be what you're looking for. cb http://www.minidiscaccess.com/item.html?PRID=1371035 ... my ... i ... from ... PC, ... and ... the...
I recently did this for my band's recording project. I have an Echo Layla which has 8 inputs and as "coincidence" would have it my MD8 had 8 track outputs....
OK, i've fixed the problem of only getting the left output, (just a coincidence of having two bad cables, RCA and 1/4"), bought a cleaning disc, cleaned the...
... That's good so far. ... re-recorded, as in transfers tracks, but no new material? ... hmm, then it might not be reading...or writing... ... Yes... and to...
... Ah, but a good question has been raised (by implication): does the 2-track cleaner work as well for the 4 (or 8) tracks? If so, even if you then have to...
... There is no physical difference between a 2-track disc and a multitrack disc, aside from an ID byte burned into the read-only portion of the disc. ...
... multitrack disc, ... disc. ... cleaner disc will work ... But what does that ID byte tell the system? Is this just something a marketing thing, or is there...
... The ID byte tells whether the disc is an audio disc or a data disc, nothing more. There are other flag bytes that tell whether the disc is fully ...
Hari OM Please subscribe to the Sri Sivananda Daily Readings - Each day, you will recieve a page sized inspiration from the Sivananda Daily Readings, a...
