Extended draft paper submission: MULTICONF-09 call for papers
 
This Extended Call for Papers is for those who didn't get a chance to submit the
papers for the earlier call for papers. The papers received and accepted in
response to this extended call for papers will be included in the final version
of the respective conference proceedings. These proceedings will be either ready
by the time of the conference (i.e., they will be available during the
conference) or soon after the conference (before the end of August 2009), based
how fast the proceedings can be prepared.
Note: If you have already submitted a paper (whether accepted or rejected or
currently under review) for MULTICONF-09, please DO NOT submit that paper again
to this extended call for papers.

IMPORTANT DATES:
Draft paper submission date: May 11, 2009
Acceptance/rejection decision: May 21, 2009
Camera ready paper and copyright and pre-registration due: May 28, 2009
Conference dates: July 13-16, 2009
LOCATION:
 
Orlando, Florida, USA
 
 
The extended deadline for draft paper submission at the 2009 Multi Conference in
Computer Science, Information Technology and Control systems and Computational
Science and Computer Engineering (MULTICONF-09) (website:
http://www.PromoteResearch.org) is very close from now. We invite draft paper
submissions. The event consists of the following conferences:
·         International Conference on Artificial Intelligence and Pattern
Recognition (AIPR-09)
·         International Conference on Automation, Robotics and Control Systems
(ARCS-09)
·         International Conference on Bioinformatics, Computational Biology,
Genomics and Chemoinformatics (BCBGC-09)
·         International Conference on Enterprise Information Systems and Web
Technologies (EISWT-09)
·         International Conference on High Performance Computing, Networking and
Communication Systems (HPCNCS-09)
·         International Conference on Information Security and Privacy (ISP-09)
·         International Conference on Recent Advances in Information Technology
and Applications (RAITA-09)
·         International Conference on Software Engineering Theory and Practice
(SETP-09)
·         International Conference on Theory and Applications of Computational
Science (TACS-09)
·         International Conference on Theoretical and Mathematical Foundations
of Computer Science (TMFCS-09)
 
The website http://www.PromoteResearch.org  contains more details.
 
Sincerely
John Edward
Publicity committee
 




[Non-text portions of this message have been removed]

Hello for everyone
Is there anybody that know XPS meansX-ray photoelectron spectroscopy.
I have data and a graph and ı found out some peakā€™s elemental meaning but
stil I am not clear about that.Is there anybody that can explain all peaks?or
sent me any book paper or smt else about that.
Ā 
ZEYNEP MERİƇ
(MASTER STUDENT)




[Non-text portions of this message have been removed]

Zeynep,
Ā 
XPS handbooks are good source of most of the peaks.Ā  I am not sure, what
material you are working with, but there are some novel peaks, you might have to
dig through literature.
Ā 
Thanks
Pankaj

--- On Sat, 5/9/09, zeynep meric <zeyno_ms@...> wrote:


From: zeynep meric <zeyno_ms@...>
Subject: [nanotech] XPS
To: nanotech@yahoogroups.com
Date: Saturday, May 9, 2009, 11:20 AM








Hello for everyone
Is there anybody that know XPS meansX-ray photoelectron spectroscopy.
I have data and a graph and ı found out some peakā€™s elemental meaning but
stil I am not clear about that.Is there anybody that can explain all peaks?or
sent me any book paper or smt else about that.
Ā 
ZEYNEP MERİƇ
(MASTER STUDENT)

[Non-text portions of this message have been removed]



















[Non-text portions of this message have been removed]

Dear here below is a link, if you have XPS spectra, B.E versus intensity, you
can easily find which element corrospond to which peake, try from below link i
will help you further if u need.
http://srdata.nist.gov/xps/

  Muhammad Arshad




________________________________
From: Pankaj Gupta <pankajgupta78@...>
To: nanotech@yahoogroups.com
Sent: Monday, May 11, 2009 3:04:03
Subject: Re: [nanotech] XPS





Zeynep,

XPS handbooks are good source of most of the peaks.  I am not sure, what
material you are working with, but there are some novel peaks, you might have to
dig through literature.

Thanks
Pankaj

--- On Sat, 5/9/09, zeynep meric <zeyno_ms@yahoo. com> wrote:

From: zeynep meric <zeyno_ms@yahoo. com>
Subject: [nanotech] XPS
To: nanotech@yahoogroup s.com
Date: Saturday, May 9, 2009, 11:20 AM

Hello for everyone
Is there anybody that know XPS meansX-ray photoelectron spectroscopy.
I have data and a graph and ı found out some peakā€™s elemental meaning but
stil I am not clear about that.Is there anybody that can explain all peaks?or
sent me any book paper or smt else about that.

ZEYNEP MERİƇ
(MASTER STUDENT)

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





       Get your new Email address!
Grab the Email name you've always wanted before someone else does!
http://mail.promotions.yahoo.com/newdomains/aa/

[Non-text portions of this message have been removed]

thanks a lot.
Ā but allĀ these Xps handbooks shows diffrent energies for elements.What causes
the difference of these energies?




________________________________
From: Pankaj Gupta <pankajgupta78@...>
To: nanotech@yahoogroups.com
Sent: Monday, May 11, 2009 4:04:03 AM
Subject: Re: [nanotech] XPS





Zeynep,
Ā 
XPS handbooks are good source of most of the peaks.Ā  I am not sure, what
material you are working with, but there are some novel peaks, you might have to
dig through literature.
Ā 
Thanks
Pankaj

--- On Sat, 5/9/09, zeynep meric <zeyno_ms@yahoo. com> wrote:

From: zeynep meric <zeyno_ms@yahoo. com>
Subject: [nanotech] XPS
To: nanotech@yahoogroup s.com
Date: Saturday, May 9, 2009, 11:20 AM

Hello for everyone
Is there anybody that know XPS meansX-ray photoelectron spectroscopy.
I have data and a graph and ı found out some peakā€™s elemental meaning but
stil I am not clear about that.Is there anybody that can explain all peaks?or
sent me any book paper or smt else about that.
Ā 
ZEYNEP MERİƇ
(MASTER STUDENT)

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]







[Non-text portions of this message have been removed]

dear different energies corrospond to different elements, if your plot have K.E
versus Intensity. you have to convert it first into B.E by simple Photoeletric
formula,  I dont know what was youe exasct question.
Regards


  Muhammad Arshad




________________________________
From: zeynep meric <zeyno_ms@...>
To: nanotech@yahoogroups.com
Sent: Monday, May 11, 2009 9:10:10
Subject: Re: [nanotech] XPS





thanks a lot.
  but all these Xps handbooks shows diffrent energies for elements.What causes
the difference of these energies?

____________ _________ _________ __
From: Pankaj Gupta <pankajgupta78@ yahoo.com>
To: nanotech@yahoogroup s.com
Sent: Monday, May 11, 2009 4:04:03 AM
Subject: Re: [nanotech] XPS

Zeynep,

XPS handbooks are good source of most of the peaks.  I am not sure, what
material you are working with, but there are some novel peaks, you might have to
dig through literature.

Thanks
Pankaj

--- On Sat, 5/9/09, zeynep meric <zeyno_ms@yahoo. com> wrote:

From: zeynep meric <zeyno_ms@yahoo. com>
Subject: [nanotech] XPS
To: nanotech@yahoogroup s.com
Date: Saturday, May 9, 2009, 11:20 AM

Hello for everyone
Is there anybody that know XPS meansX-ray photoelectron spectroscopy.
I have data and a graph and ı found out some peakā€™s elemental meaning but
stil I am not clear about that.Is there anybody that can explain all peaks?or
sent me any book paper or smt else about that.

ZEYNEP MERİƇ
(MASTER STUDENT)

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





       New Email names for you!
Get the Email name you've always wanted on the new @ymail and @rocketmail.
Hurry before someone else does!
http://mail.promotions.yahoo.com/newdomains/aa/

[Non-text portions of this message have been removed]

hello again
I have a question :)
I found out peaks but they are shifted I think or I am wrong.because oxygen peak
should be at 531 eV but in my data it is 536 eV.What is wrong here?
or ıs there smt wrong hereĀ .Can data be shifted?




________________________________
From: muhammad arshad <arshad_pr2002@...>
To: nanotech@yahoogroups.com
Sent: Monday, May 11, 2009 11:43:36 AM
Subject: Re: [nanotech] XPS





dear different energies corrospond to different elements, if your plot have K.E
versus Intensity. you have to convert it first into B.E by simple Photoeletric
formula, I dont know what was youe exasct question.
Regards

Muhammad Arshad

____________ _________ _________ __
From: zeynep meric <zeyno_ms@yahoo. com>
To: nanotech@yahoogroup s.com
Sent: Monday, May 11, 2009 9:10:10
Subject: Re: [nanotech] XPS

thanks a lot.
but all these Xps handbooks shows diffrent energies for elements.What causes the
difference of these energies?

____________ _________ _________ __
From: Pankaj Gupta <pankajgupta78@ yahoo.com>
To: nanotech@yahoogroup s.com
Sent: Monday, May 11, 2009 4:04:03 AM
Subject: Re: [nanotech] XPS

Zeynep,

XPS handbooks are good source of most of the peaks. I am not sure, what material
you are working with, but there are some novel peaks, you might have to dig
through literature.

Thanks
Pankaj

--- On Sat, 5/9/09, zeynep meric <zeyno_ms@yahoo. com> wrote:

From: zeynep meric <zeyno_ms@yahoo. com>
Subject: [nanotech] XPS
To: nanotech@yahoogroup s.com
Date: Saturday, May 9, 2009, 11:20 AM

Hello for everyone
Is there anybody that know XPS meansX-ray photoelectron spectroscopy.
I have data and a graph and ı found out some peakā€™s elemental meaning but
stil I am not clear about that.Is there anybody that can explain all peaks?or
sent me any book paper or smt else about that.

ZEYNEP MERİƇ
(MASTER STUDENT)

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

New Email names for you!
Get the Email name you've always wanted on the new @ymail and @rocketmail.
Hurry before someone else does!
http://mail. promotions. yahoo.com/ newdomains/ aa/

[Non-text portions of this message have been removed]







[Non-text portions of this message have been removed]

Zeynep,
I extensively used XPS during my masters on nanoceria. Ce can present in
both Ce3+ and Ce4+. I have total of 10 peaks for Cerium (out of which 6 are
from Ce3+ and 4 are from Ce4+). To find the Ce3+ to Ce4+ ratio, I calculated
it as a ratio of Area under all the 6 corresponding peaks to Area under 4
corresponding peaks.
(All the calculations are based on B.E)

so I suggest, find what are the oxidation states of the element and then
which peaks corresponds to which oxidation states. Area under the curve is
the good representation of how much of that state present in it.

XPS is a powerful tool to analyze oxidation states.

Thanks
Ranjith

On Mon, May 11, 2009 at 3:43 AM, muhammad arshad <arshad_pr2002@...>wrote:

>
>
> dear different energies corrospond to different elements, if your plot have
> K.E versus Intensity. you have to convert it first into B.E by simple
> Photoeletric formula, I dont know what was youe exasct question.
> Regards
>
> Muhammad Arshad
>
> ________________________________
>
> From: zeynep meric <zeyno_ms@... <zeyno_ms%40yahoo.com>>
> To: nanotech@yahoogroups.com <nanotech%40yahoogroups.com>
> Sent: Monday, May 11, 2009 9:10:10
> Subject: Re: [nanotech] XPS
>
> thanks a lot.
> but all these Xps handbooks shows diffrent energies for elements.What
> causes the difference of these energies?
>
> ____________ _________ _________ __
> From: Pankaj Gupta <pankajgupta78@ yahoo.com>
> To: nanotech@yahoogroup s.com
> Sent: Monday, May 11, 2009 4:04:03 AM
> Subject: Re: [nanotech] XPS
>
> Zeynep,
>
> XPS handbooks are good source of most of the peaks. I am not sure, what
> material you are working with, but there are some novel peaks, you might
> have to dig through literature.
>
> Thanks
> Pankaj
>
> --- On Sat, 5/9/09, zeynep meric <zeyno_ms@yahoo. com> wrote:
>
> From: zeynep meric <zeyno_ms@yahoo. com>
> Subject: [nanotech] XPS
> To: nanotech@yahoogroup s.com
> Date: Saturday, May 9, 2009, 11:20 AM
>
> Hello for everyone
> Is there anybody that know XPS meansX-ray photoelectron spectroscopy.
> I have data and a graph and ż found out some peak's elemental meaning but
> stil I am not clear about that.Is there anybody that can explain all
> peaks?or sent me any book paper or smt else about that.
>
> ZEYNEP MERŻĒ
> (MASTER STUDENT)
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> New Email names for you!
> Get the Email name you've always wanted on the new @ymail and
> @rocketmail.
> Hurry before someone else does!
> http://mail.promotions.yahoo.com/newdomains/aa/
>
> [Non-text portions of this message have been removed]
>
>
>


[Non-text portions of this message have been removed]

thanks a lot but this is so complicated than ı expect.ı will try

Ā 


----- Original Message ----
From: ranjith kumar <ranjith2882@...>
To: nanotech@yahoogroups.com
Sent: Monday, May 11, 2009 5:04:41 PM
Subject: Re: [nanotech] XPS

Zeynep,
I extensively used XPS during my masters on nanoceria. Ce can present in
both Ce3+ and Ce4+. I have total of 10 peaks for Cerium (out of which 6 are
from Ce3+ and 4 are from Ce4+). To find the Ce3+ to Ce4+ ratio, I calculated
it as a ratio of Area under all the 6 corresponding peaks to Area under 4
corresponding peaks.
(All the calculations are based on B.E)

so I suggest, find what are the oxidation states of the element and then
which peaks corresponds to which oxidation states. Area under the curve is
the good representation of how much of that state present in it.

XPS is a powerful tool to analyze oxidation states.

Thanks
Ranjith

On Mon, May 11, 2009 at 3:43 AM, muhammad arshad <arshad_pr2002@...>wrote:

>
>
> dear different energies corrospond to different elements, if your plot have
> K.E versus Intensity. you have to convert it first into B.E by simple
> Photoeletric formula, I dont know what was youe exasct question.
> Regards
>
> Muhammad Arshad
>
> ________________________________
>
> From: zeynep meric <zeyno_ms@... <zeyno_ms%40yahoo.com>>
> To: nanotech@yahoogroups.com <nanotech%40yahoogroups.com>
> Sent: Monday, May 11, 2009 9:10:10
> Subject: Re: [nanotech] XPS
>
> thanks a lot.
> but all these Xps handbooks shows diffrent energies for elements.What
> causes the difference of these energies?
>
> ____________ _________ _________ __
> From: Pankaj Gupta <pankajgupta78@ yahoo.com>
> To: nanotech@yahoogroup s.com
> Sent: Monday, May 11, 2009 4:04:03 AM
> Subject: Re: [nanotech] XPS
>
> Zeynep,
>
> XPS handbooks are good source of most of the peaks. I am not sure, what
> material you are working with, but there are some novel peaks, you might
> have to dig through literature.
>
> Thanks
> Pankaj
>
> --- On Sat, 5/9/09, zeynep meric <zeyno_ms@yahoo. com> wrote:
>
> From: zeynep meric <zeyno_ms@yahoo. com>
> Subject: [nanotech] XPS
> To: nanotech@yahoogroup s.com
> Date: Saturday, May 9, 2009, 11:20 AM
>
> Hello for everyone
> Is there anybody that know XPS meansX-ray photoelectron spectroscopy.
> I have data and a graph and Ć½ found out some peak's elemental meaning but
> stil I am not clear about that.Is there anybody that can explain all
> peaks?or sent me any book paper or smt else about that.
>
> ZEYNEP MERĆ¯Ć‡
> (MASTER STUDENT)
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> New Email names for you!
> Get the Email name you've always wanted on the new @ymail and
> @rocketmail.
> Hurry before someone else does!
> http://mail.promotions.yahoo.com/newdomains/aa/
>
> [Non-text portions of this message have been removed]
>
>Ā 
>


[Non-text portions of this message have been removed]



------------------------------------

The Nanotechnology Industries mailing list.
http://www.nanoindustries.com
Nanotechnology: solutions for the future.Yahoo! Groups Links

who knows mean free path of aluminium oxide?

Zeynep,
All the peaks in XPS shifts because of charging effect. It is common in XPS
data. They needs to be re-shifted back based on the reference element before
doing analysis.

Sometimes you may just see one peak, but it may be sum of many small peaks.
I used peakfit software to fit all the individual peaks into XPS data.
Analyzing XPS data looks complicated at first couple of times, but it is
pretty simple afterwards.

Please review section 3.2 in page 3 of the attached publication. (Ce3+ has 4
peaks & Ce4+ has 6 peaks- i mentioned it otherway in my last mail)

Thanks
Ranjith

On Mon, May 11, 2009 at 3:48 PM, zeynep meric <zeyno_ms@...> wrote:

>
>
>
> thanks a lot but this is so complicated than ı expect.ı will try
>
>
>
> ----- Original Message ----
> From: ranjith kumar <ranjith2882@... <ranjith2882%40gmail.com>>
> To: nanotech@yahoogroups.com <nanotech%40yahoogroups.com>
> Sent: Monday, May 11, 2009 5:04:41 PM
> Subject: Re: [nanotech] XPS
>
> Zeynep,
> I extensively used XPS during my masters on nanoceria. Ce can present in
> both Ce3+ and Ce4+. I have total of 10 peaks for Cerium (out of which 6 are
> from Ce3+ and 4 are from Ce4+). To find the Ce3+ to Ce4+ ratio, I
> calculated
> it as a ratio of Area under all the 6 corresponding peaks to Area under 4
> corresponding peaks.
> (All the calculations are based on B.E)
>
> so I suggest, find what are the oxidation states of the element and then
> which peaks corresponds to which oxidation states. Area under the curve is
> the good representation of how much of that state present in it.
>
> XPS is a powerful tool to analyze oxidation states.
>
> Thanks
> Ranjith
>
> On Mon, May 11, 2009 at 3:43 AM, muhammad arshad
<arshad_pr2002@...<arshad_pr2002%40yahoo.com>
> >wrote:
>
> >
> >
> > dear different energies corrospond to different elements, if your plot
> have
> > K.E versus Intensity. you have to convert it first into B.E by simple
> > Photoeletric formula, I dont know what was youe exasct question.
> > Regards
> >
> > Muhammad Arshad
> >
> > ________________________________
> >
> > From: zeynep meric <zeyno_ms@... <zeyno_ms%40yahoo.com> <zeyno_ms%
> 40yahoo.com>>
> > To: nanotech@yahoogroups.com <nanotech%40yahoogroups.com> <nanotech%
> 40yahoogroups.com>
>
> > Sent: Monday, May 11, 2009 9:10:10
> > Subject: Re: [nanotech] XPS
> >
> > thanks a lot.
> > but all these Xps handbooks shows diffrent energies for elements.What
> > causes the difference of these energies?
> >
> > ____________ _________ _________ __
> > From: Pankaj Gupta <pankajgupta78@ yahoo.com>
> > To: nanotech@yahoogroup s.com
> > Sent: Monday, May 11, 2009 4:04:03 AM
> > Subject: Re: [nanotech] XPS
> >
> > Zeynep,
> >
> > XPS handbooks are good source of most of the peaks. I am not sure, what
> > material you are working with, but there are some novel peaks, you might
> > have to dig through literature.
> >
> > Thanks
> > Pankaj
> >
> > --- On Sat, 5/9/09, zeynep meric <zeyno_ms@yahoo. com> wrote:
> >
> > From: zeynep meric <zeyno_ms@yahoo. com>
> > Subject: [nanotech] XPS
> > To: nanotech@yahoogroup s.com
> > Date: Saturday, May 9, 2009, 11:20 AM
> >
> > Hello for everyone
> > Is there anybody that know XPS meansX-ray photoelectron spectroscopy.
> > I have data and a graph and Ć½ found out some peak's elemental meaning but
> > stil I am not clear about that.Is there anybody that can explain all
> > peaks?or sent me any book paper or smt else about that.
> >
> > ZEYNEP MERĆ¯Ć‡
> > (MASTER STUDENT)
> >
> > [Non-text portions of this message have been removed]
> >
> > [Non-text portions of this message have been removed]
> >
> > [Non-text portions of this message have been removed]
> >
> > New Email names for you!
> > Get the Email name you've always wanted on the new @ymail and
> > @rocketmail.
> > Hurry before someone else does!
> > http://mail.promotions.yahoo.com/newdomains/aa/
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
> The Nanotechnology Industries mailing list.
> http://www.nanoindustries.com
> Nanotechnology: solutions for the future.Yahoo! Groups Links
>
>
>


[Non-text portions of this message have been removed]

Call For Papers - Deadline: May 27, 2009

                        WORLDCOMP'09
         The 2009 World Congress in Computer Science,
         Computer Engineering, and Applied Computing

      Date and Location: July 13-16, 2009, Las Vegas, USA
          http://www.world-academy-of-science.org/


Indexing: Inspec / IET / The Institute for Engineering and Technology,
           DBLP / CS Bibliography, and others.

You are invited to submit a paper (see instructions below.)
This announcement is ONLY for those who missed the opportunity
to submit their papers in response to earlier announcements
(authors who have already been notified that their papers have
been accepted/not-accepted should IGNORE this announcement.)

WORLDCOMP'09 is composed of a number of tracks (joint-conferences,
tutorials, and workshops); all will be held simultaneously, same
location and dates: July 13-16, 2009. For the complete list of
joint conferences, see: http://www.world-academy-of-science.org/

This is a Call For Papers for publication in the Final Edition
of the conference proceedings.  All papers submitted in response
to this announcement will be evaluated for publication in the
Final Edition of the proceedings which will go to press soon
after the conference (publication date: late August 2009).

IMPORTANT DATES:

May 27, 2009:       Submission of full papers for evaluation (about 7 pages)
June 10, 2009:      Notification of acceptance
June 24, 2009:      Registration
July 13-16, 2009:   WORLDCOMP'09 Congress (all joint-conferences)
July 24, 2009:      Camera-Ready Papers Due for publication in the
                     Final Edition of the proceedings.

SUBMISSION OF PAPERS:

Prospective authors are invited to submit/upload their papers
in pdf or MS doc (about 7 pages, single spaced with the font size
of 10 or 11) to the following web site:
http://worldcomp.cviog.uga.edu/

All reasonable typesetting formats are acceptable.  Authors of
accepted papers will later be asked to follow a particular
typing instructions to prepare their final paper for publication.

Papers must not have been previously published or currently
submitted for publication elsewhere.  The first page of the paper
should include: title of the paper, name, affiliation, postal
address, and email address for each author.  Accepted papers
will be published in the final edition of the respective
proceedings/books.

All submissions will be evaluated for originality, significance,
clarity, and soundness.  Each paper will be refereed by two
researchers in the topical area.  All proceedings of WORLDCOMP
will be published and indexed in:
Inspec / IET / The Institute for Engineering and Technology,
DBLP / CS Bibliography, and others.

LIST OF CONFERENCES:

BIOCOMP'09: International Conf. on Bioinformatics &
             Computational Biology
CDES'09:    International Conf. on Computer Design
CGVR'09:    International Conf. on Computer Graphics & Virtual
             Reality
CSC'09:     International Conf. on Scientific Computing
DMIN'09:    International Conf. on Data Mining
EEE'09:     International Conf. on e-Learning, e-Business,
             Enterprise Information Systems, & e-Government
ERSA'09:    International Conf. on Engineering of Reconfigurable
             Systems and Algorithms
ESA'09:     International Conf. on Embedded Systems & Applications
FCS'09:     International Conf. on Foundations of Computer Science
FECS'09:    International Conf. on Frontiers in Education: Computer
             Science & Computer Engineering
GCA'09:     International Conf. on Grid Computing & Applications
GEM'09:     International Conf. on Genetic & Evolutionary Methods
ICAI'09:    International Conf. on Artificial Intelligence
ICOMP'09:   International Conf. on Internet Computing
ICWN'09:    International Conf. on Wireless Networks
IKE'09:     International Conf. on Information & Knowledge
             Engineering
IPCV'09:    International Conf. on Image Processing, Computer
             Vision, & Pattern Recognition
MSV'09:     International Conf. on Modeling, Simulation &
             Visualization Methods
PDPTA'09:   International Conf. on Parallel and Distributed
             Processing Techniques & Applications
SAM'09:     International Conf. on Security and Management
SERP'09:    International Conf. on Software Engineering Research
             and Practice
SWWS'09:    International Conf. on Semantic Web and Web Services


PLANNED TUTORIALS:

See the following web site for a partial list:
http://www.world-academy-of-science.org/worldcomp09/ws/tutorials

KEYNOTE LECTURES:
See the following web site for a partial list:
http://www.world-academy-of-science.org/worldcomp09/ws/keynotes

LOCATION OF CONFERENCE:

WORLDCOMP will be held in the Monte Carlo hotel, Las Vegas, USA
(with any overflows at other near-by hotels).  This is a mega
hotel with excellent conference facilities and over 3,000 rooms.
It is minutes from the airport with 24-hour shuttle service to and
from the airport.  This hotel has many recreational attractions,
including: spa, pools, sunning decks, Easy River, wave pool,
lighted tennis courts, nightly shows, a number of restaurants, ...
The negotiated room rate for conference attendees is very reasonable.
The hotel is within walking distance from most other attractions.

SPONSORS:

    Academic/Technical Co-Sponsors: (a partial list)

    -> United States Military Academy, Network Science Center
    -> Biomedical Cybernetics Lab., HST of Harvard University and
       MIT, USA
    -> Argonne's Leadership Computing Facility of Argonne National
       Laboratory, USA
    -> Functional Genomics Laboratory, University of Illinois at
       Urbana-Champaign, USA
    -> Minnesota Supercomputing Institute, University of Minnesota, USA
    -> Intelligent Data Exploration and Analysis Laboratory, University
       of Texas at Austin, Austin, Texas, USA
    -> Harvard Statistics Department Genomics & Bioinformatics
       Laboratory, Harvard University, USA
    -> Texas Advanced Computing Center, The University of Texas at
       Austin, Texas, USA
    -> Center for the Bioinformatics and Computational Genomics,
       Georgia Institute of Technology, Atlanta, Georgia, USA
    -> Bioinformatics & Computational Biology Program, George Mason
       University, Virginia, USA
    -> Institute of Discrete Mathematics and Geometry, Vienna
       University of Technology, Austria
    -> BioMedical Informatics & Bio-Imaging Laboratory, Georgia
       Institute of Technology and Emory University, Georgia, USA
    -> Knowledge Management & Intelligent System Center (KMIS) of
       University of Siegen, Germany
    -> National Institute for Health Research, UK
    -> Hawkeye Radiology Informatics, Department of Radiology,
       College of Medicine, University of Iowa, Iowa, USA
    -> Institute for Informatics Problems of the Russian Academy of
       Sciences, Moscow, Russia.
    -> Medical Image HPC & Informatics Lab (MiHi Lab), University
       of Iowa, Iowa, USA
    -> SECLAB
       University of Naples Federico II, University of Naples
       Parthenope, and the Second University of Naples, Italy
    -> The University of North Dakota, Grand Forks, North Dakota, USA
    -> Intelligent Cyberspace Engineeing Lab., ICEL, Texas A&M
       University (Com./Texas), USA
    -> International Society of Intelligent Biological Medicine
    -> World Academy of Biomedical Sciences and Technologies

    Other Co-Sponsors:

    -> European Commission
    -> Super Micro Computer, Inc., San Jose, California, USA
    -> High Performance Computing for Nanotechnology (HPCNano)
    -> HoIP - Health without Boundaries
    -> The International Council on Medical and Care Compunetics
    -> The UK Department for Business, Enterprise & Regulatory Reform
    -> VMW Solutions Ltd.
    -> Scientific Technologies Corporation
    -> Hodges' Health
    -> Bentham Science Publishers
    -> GridToday

is a charge particle can remove a dust parrticle if it has no charge?

--- In nanotech@yahoogroups.com, "tarasingh02" <tarasingh02@...> wrote:
>
> is a charge particle can remove a dust parrticle if it has no charge?
>
no,because one neutral body can not affected by any charghed body

I want to do my Research work in CMR. So i need help about CMR.
what is CMR?
What is the main objective of CMR?
What are the application and uses of CMR in industries and other places?
Any future is in CMR if i do the field Work? Is there any difficult in CMR to
prepare and analysis?
Please inform any other appication in CMR.
Please help me do my Ph.D. work.

Sivakumar



       Own a website.Get an unlimited package.Pay next to nothing.*Go to
http://in.business.yahoo.com/

[Non-text portions of this message have been removed]

I want to do my Research work in CMR. So i need help about CMR.
what is CMR?
What is the main objective of CMR?
What are the application and uses of CMR in industries and
  other places?
Any future is in CMR if i do the field Work? Is there any difficult in CMR to
prepare and analysis?
Please inform any other appication in CMR.
Please help me do my Ph.D. work.

Sivakumar






       Explore and discover exciting holidays and getaways with Yahoo! India
Travel http://in.travel.yahoo.com/

[Non-text portions of this message have been removed]

Dear Scientist or Owner of this group,
We have created a scientific video site called as DnaTube.com
(http://www.dnatube.com ) . Dnatube is a non-profit scientific video source
aiming to help scientists understand scientific concepts easily. We would be so
happy if you forward this message to your users who can be interested in science
and scientific videos. Thank you
Site name: http://www.dnatube.com
Dnatube Team

Hi All,

My company recently acquired a 2004 Thermo Nicolet Almega XR Dispersive Raman
Spectrometer.  It's a complete system in very good condition.  We're resellers
but generally don't deal with this type of equipment so I am a bit lost as to
who would use this. Also any suggestions/knowledge of this instrument is much
appreciated.

Thanks!

Liz Leigh

   1460 O'Brien Dr
   Menlo Park, CA 94025
   p: 650-804-7006
   f: 650-324-2458
   Elizabeth@...                                           
www.aaisolutions.com

what is infrared camera? How it does work?

Infrared cameras use detectors either cooled or uncooled to detect radiation
in the IR range.  This range is NOT visible with the human eye, so the
detector looks at the energy in this wavelength and converts it to an image
the human eye can see.  Used for thermal imaging of IC's, in space, thermal
gun sites, the Hubble telescope, etc.  Hope that helps. Don

   _____

From: nanotech@yahoogroups.com [mailto:nanotech@yahoogroups.com] On Behalf
Of tarasingh02
Sent: Monday, June 01, 2009 11:26 AM
To: nanotech@yahoogroups.com
Subject: [nanotech] camera





what is infrared camera? How it does work?






[Non-text portions of this message have been removed]

Liz,

You wrote:
> ...XR Dispersive
> Raman Spectrometer. ...I am a
> bit lost as to who would use this...

Analytical chemists, materials scientists. We use one in undergraduate labs.

Chuck

Liz,

This site may help you. Dispersive Raman Spectroscopy is neither for
the faint of heart nor the impoverished of wallet.

Frank
On Jun 1, 2009, at 8:23 AM, liz.leigh24 wrote:

>
>
> Hi All,
>
> My company recently acquired a 2004 Thermo Nicolet Almega XR
> Dispersive Raman Spectrometer. It's a complete system in very good
> condition. We're resellers but generally don't deal with this type
> of equipment so I am a bit lost as to who would use this. Also any
> suggestions/knowledge of this instrument is much appreciated.
>
> Thanks!
>
> Liz Leigh
>
> 1460 O'Brien Dr
> Menlo Park, CA 94025
> p: 650-804-7006
> f: 650-324-2458
> Elizabeth@... www.aaisolutions.com
>
>



[Non-text portions of this message have been removed]

Dear Group,
I have been advocating for a soil carbon sequestration / biofuels technology
generally refered to as Biochar, charcoal with an
aromaticity that has a high affinity with soil biota. Resulting in high CEC,
high yields, high gomalin and other recalcitrant organic carbons.
This is a Nano technology for the soil that represents the most comprehensive,
low cost, and productive approach to long term stewardship and sustainability.

I would like your comments on the posting below, on a thread about nano
structured carbons

Thanks
Erich


by geoff;
  "We're onto it here folks.

Fullerenes do a splash of atomic weights with peaks... big one at C60, some very
large.

They were FOUND researching the physical structure of charcoal, about
contemporaneously with the "El Dorado" Terrapreta... on another continent. Very
Recently. Still stunning current ground-breaking science.

They are in charcoal that has got hot enough, long enough to form aromatic ring
sheets.

In charcoal they appear as graphene sheets with distortions of the aromatic
rings due to rogue non-C components, or 5-C rings, causing them to curl.

Sometimes they are intercolated with small balls. They make things slipperier.
Friable perhaps?

When they curl completely they makes tubes... nano tubes...

And the oldest charcoal drawing was...?

And in Australia, Terrapreta Australis has been found by Adrianna Downie and
Lukas Van Swieten in Victorian aboriginal cooking pits resembling the maori
'hungi', dated at 600 - 1200 years. The C is still there.

A call yesterday assured me of a new find pushing aboriginal settlement of this
continent back to ~150,000 years, twice the current top estimate.

So Fullerenes made by humans have been here a long time, by nature (every
lightning hit tree...) a lot longer.

I thought that was exciting....

Now, after the IBI conference, Ron Smernick, Uni Adelaide and others treated us
to Physics and microscopy 101. We learned the "aromaticity" of charcoal graphene
sheets as detected by magnetic resonance spectroscopy, can give a extremely
accurate picture of the "Twins Peaks " ( sorry) of a characterisation spectrum
that is now showing up in some of the best current biochars AND the distant TPs
of Amazonia.
It looks like the Buckyballs' precursors, sheets of C6 rings, have magnetic
resonances that carry an easily discernible, vital key to characterising the
best TP for our char meme.
owzat?
geoff

hi,
i m working on biosynthesis of iron and zinc nanoparticles. I would like to know
that is it possible to characterize the mentioned NPs by UV- Vis. spectroscopy.
Also valuable suggestions are welcomed.

A mere layman am I,but have a craving to
Learn and know more about nano advances.
Like can titanium particles in say paint act as
a signal blocker:WiFi,3G,cellphone jamming.
Is it possible to energize/run a current/magnetic
to cause the titanium to align / turn the above off
to end the alignment,thus turning signal disruption
on and off? Or is it the wrong metal to use?

what is red shift? Explain ti in detail.

IIRC, This company was at one time talking about your application, but this
is the nearest thing I found on their web site
http://www.naturalnano.com/index.php?option=com_content&task=view&id=143&Itemid=\
207

On Tue, Jun 2, 2009 at 11:33 PM, cadizat42 <cadizat42@...> wrote:

>
>
> A mere layman am I,but have a craving to
> Learn and know more about nano advances.
> Like can titanium particles in say paint act as
> a signal blocker:WiFi,3G,cellphone jamming.
> Is it possible to energize/run a current/magnetic
> to cause the titanium to align / turn the above off
> to end the alignment,thus turning signal disruption
> on and off? Or is it the wrong metal to use?
>
>
>


[Non-text portions of this message have been removed]

Hi..
              i am study BE(ECE) in final year.Any international conference
&workshop any place consists send maill

Dear \ friends
  Iam a young chemist working in an international mining and metallurgical
company ,and I need papers or any application in this field.I would so grateful
to whom helping me.
    thanks ,,,,

http://knol.google.com/k/-/-/5kus990wdycp/14

This is a very good article about nanotecnology applications in the medical
field.