[iaxfwd] defined in iax.conf it's a user. The context where the calls from this user are going is defined in general section if not overitten per user by...
I think I asked this before but I forget where or if it was answered... The Asterisk '#' key is used to transfer calls. This is inconvenient as many services,...
Has been answered: http://groups.yahoo.com/group/nslu2-asterisk/message/93 in feature.conf you have to uncomment and set to what you want: blindxfer for blind...
Corneliu, This was to easy!!!! After reading the various forums it was obvious to me that you CAN upgrade 2.x hardware with 3.x firmware. I did it tonight and...
Doug, FYI, I had terrible echo problems with the most recent SPA3000 firmware. It took much trial and error before I got them adequately reduced (but not...
Dave, I managed to fix most of the echo problems here. I am using (latest) 3.1.10d version. I found that there was an unbalance in my PSTN<>SPA settings. I...
... That may be a newer version that was available the last time I messed with it. Mine is running 3.1.3. ... On the Regional tab, at the bottom, I have FXS...
... I forgot to mention the real challenge I faced with this, which is volume. It was a big balancing act for me. I could adjust the gain on one of the...
OK, so I have my SPA3000 installed, with PSTN coming in, and registered with a VoIP provider for outgoing calls, and the main house cordless phone on a dual...
Dave, An update on my * .... I went back to 3.1.3 as the lastest 3.1.10 seems to have an echo problem. Perhaps it is level problems but I did not feel like...
... Yes, for storing voicemail messages. Depends on how many voicemail boxes you want to configure and how many messages you want to be able to store. I use...
Hi all, First of all, I would really like to thank Corneliu for his effort in getting the asterisk ready for openslug and getting me involved in this project. ...
I want to play around with running running asterisk on my nslu and wonder whose FXS is the most reasonable for getting things setup? Reasonable performance...
I was just curious to see if asterisk users in this group were using fw 5.5 or 6.8. I set up on 6.8 and had a bit of a stutter problem when access asterisk ...
Hello, I am interested in buying an NSLU2 to host an Asterisk PBX for home usage. The idea is that I would have one external PSTN phone line, three internal...
I'm using unslung 5.5 and woks fine at native CPU speed (133MHz). Soon it will be available for OpenSlug, and from Ovi's tests it works even better than on...
I was able to host two simultaneous calls on unslung, which is having all the Linksys 'native' apps running. It was working ok. I have the impression that...
... calls? Yes. I was able to test up to 4 simultaneous calls. Some with transcoding gsm-ulaw and the slug could take more, but I didn't have more testphones...
I don't know if any of you subscribe to the Asterisk mailist but in the last few days I started a thread regarding DTMF pass thru problems when using the ...
I was nor aware of this issue, because I'm using DTMF only the other way (from PSTN to asterisk) to check my voicemail remotely and to make PSTN to VoIP...
Hi All, The asterisk-1.2.9.1 is available for unslung and soon OpenSlug packages for asterisk-1.2.9.1 and asterisk-sounds-1.2.1 will show up in the feeds. This...
Corneliu, OK well it is also possible this behavior may have changed in SPA-3000 versions also. I am currently using: Software Version: 3.1.3(GWa) Hardware...
Hi Doug, I have the sw version that came with the adaptor 2.0.13(GWg) hw version 2.0.1(42a8) and I just tested to call a bank over PSTN and I had NO problem...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
