Hi Matt, Many thanks for the help, the nc command reports connection refused. I have used a tftp client to connect and the tftp is for my Cisco phone to...
i found that putting in http.conf bindaddr=0.0.0.0 seemed to get things going... with other entries like the NAt address or loopbak, the gui was not responding...
... Have you tried to run tftpd stand-alone? e.g. /opt/sbin/in.tftpd -v -l -s /opt/tftpboot then try the nc test in another window. If that works, try with...
... Thank you for your help. I managed to get it all working, and it works fine now. When I first started playing with Asterisk, I tried an Asterisk@Home ...
... no. 0.0.0.0 means all the IP addresses of the box (slug) It should work with the IP address showed by the command: ifconfig -a Neither NAT or loopback...
is there anyway to get out of asterisk14 cli? without shutting asterisk down ? help shows no quit or exit. nor do they work... -- View this message in context:...
start asterisk with: /opt/sbin/asterisk then connect to it via: /opt/sbin/rasterisk you will be able to disconnect after that via 'exit'. Regards, Ovidiu Sas...
Hi All, Now thanks to www.gtalk2voip.com you can call your SIP number from your favorite IM client: Yahoo, Windows Live Messenger, gtalk or gizmoproject. ...
And check the wiki on how to call yahoo accounts from your asterisk box: http://www.nslu2-linux.org/wiki/Optware/AsteriskGizmo Note: It works only with...
Or without the need of a Gizmoproject account: [yahoo-proxy-out] type=peer host=yahoo.com outboundproxy=yahoo.gtalk2voip.com fromuser=<your extension> ...
members have full, unrestricted access to the site for the period of their membership. We do not charge to download the free listed on this site (even when we...
Hy guys, I installed asterisk (unslug 6.8). My nslu2 (ip:192.168.1.77) is connected to a linksys router (ip:192.168.1.1) and so my spa3102 (ip:192.168.1.65)....
As two independent SIP friends: - 1 SIP friend for your phone (attached to the FXS port) - 1 SIP friend or (user+peer) for your phone line (attached to the FXO...
... As I said: Asterisk will get the IP address of the ATA when both SIP users will register to Asterisk. So, your ATA needs to have your nslu2 IP address. On...
Guys, Is your Asterisk Gui working properly? I installed Asterisk 1.4 with the ipkg install command Both asterisk12 and asterisk-gui were installed. But when I...
I could not find any step by step guide for configuring a SPA-3102 on nslu2. I have asterisk14. The gui asterisk14-gui does not work. Cant go beyond 2nd page....
Hi all, I am subscribed to this group from long time and want to work on asterisk to increase my knowledge. I previously configures the asterisk for a US...
I was trying out a few new settings the other day (all of which I commented out), and now when I dial out I get a sick sounding warbling ring tone. And my...
Ovidiu, I tried it already. THe GUI runs but it just goes to second page. Can't go further as the Next Button won't enable. arvind ... From: "Ovidiu Sas"...
Hi Arvind, There were other people in the list reporting this issue and how they solve it. Pls. search the archive. I don't use the GUI ... Let me know if you...
Follow the link to my new group, this is for all the ladies and men out there! and also you can request pics for yourself! Join now then invite all your...
There is no difference in configuring a SPA3102 to be used by asterisk on nslu2 comparing with using it with asterisk running on a PC. (thats why this group...
Hello! When I try to leave VM and the prompt says "...hangup or press the # sign when finish"(or something like this). Afte I leave VM, if I just hangup the...
Thank you, Corneliu. I comment out these lines and now the * server will hang up when press the # key. The CLI show that when execute the macro, an error like...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
