Hello guys, Whosoever is the initiator of this forum, should be blessed. Because actually I am looking forward to makin my million dollar deal from this....
Ayafor, If you could do this, then everyone would be doing it and the mobile operators would all be bankrupt.... Just because you have VOIP doesn't mean you...
Hello all, I followed the nslu2 asterisk sample config and able to forward my incoming gizmo voip call to an internal extension number. can the call be...
There is no doubt that the potential for making some savings is there, but this require more work that having an Asterisk PBX and making some ingenious...
As your dial plan is using this pattern to dial out on vopipstunt: _001778XXXXXXX You have to forward (unconditional/busy/no answer) the extension that rings...
Hi, I've got a problem with Asterisk 1.4(.6) on my wl500gp (ok - not an nslu2 - but running optware asterisk all the same). Roughly 1 out of 4 times dialing...
Install tcpdump and spy the SIP and RTP packets. Check the content of the SIP/SDP message and check the RTP flow. Also, make sure that your firewall allows SIP...
If I understand you correctly, I need to dial *21*my_ext_number, *41*my_ext_number, *61*my_ext_number to enable (unconditional/busy/no answer) forward for...
I know this is more Asterisk question, Please bear with me as I am in the beginning of exploring the features of Asterisk. :) I read the future of telephony...
Thanks for the response. I checked it, and it all was OK. The reason for my problems turned out to be completely unrelated. There is a known problem with...
To answer my question, if I use - print "RECORD FILE file_name gsm 1234 -1\n"; - , then print "STREAM FILE file_name \"\"\n"; the file_name.gsm will be...
Each internal call generates two records on the CSV log file - one for dialing out and one for receiving. This makes the log file grows fast. How can I just...
Folks, [Read on for exiting news about OpenWrt support for the NSLU2, including a web interface, which may in the future replace Unslung and SlugOS as the...
I userd the Sample conf files form the download section. Here are the isues I face 1. Cannot register with voipjet. 2. I have a SPA-1001 in a diferent NAT...
I recently installed Debian on a Linksys NSLU2 device. It's running Linux NAS 2.6.18-4-ixp4xx. I also install Asterisk 1.2.13 but I would really like to...
... Voipjet is an outgoing long distance service only. They don't have a registrar. The Asterisk config instruction are also displayed on your VoipJet account...
I read a long relevant discussion in this list about making voip call from cell phone, I am still not quite clear how it is going to be charged. say I have: 1...
That script works almost on any Linux operation system. It requires only awk and cgi support web server. Those tools can be found on any Linux and Unix...
Hi Vincent, 6 minutes cell phone call + 5 minutes voip call unfortunately.... Get a PDA with WIFI and search a non secure WIFI. Or you can buy phones, which...
Still can't register HEre is log I see on asterisk using sip debug <-- SIP read from 59.94.255.188:5060: NOTIFY sip:nirvana-tech.dyndns.org SIP/2.0 Via:...
This is a NOTIFY message that the phone (407) is using to keep alive the NAT bindings. As the message is getting to your asterisk box, it looks that the NAT...
1.2 is approaching it's end of life cycle: "Version 1.2.24 is the final 1.2 release that contains normal bug fixes. The 1.2 branch will only be maintained with...
Hi there in a fit of peak I've managed to misplace my installation disk for the NSLU2. I'd be immensely grateful if anyone could MSN me the setup utility exe. ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
