Hello, Probably only for Dutch users. I'm trying to connect my NSLU2 running asterisk (behind a NAT) to Budgetphone. Calling in from the outside causes...
Sounds familiar ? I have connected my Asterisk to my Sipura 3102. Outbound calls works ok ( asterisk -> Sipura -> PSTN) Inbound not ( PSTN -> Sipura ->...
Would "clew" be the Dutch for "clue"? I'm just pulling your leg! Did you do all the SIP/NAT stuff so that your packets are re-addresses properly? You need to...
Forgot to add that you should set "canreinvite=no" to prevent your handsets leaving asterisk which will then disconnect the call. Mark ... -- Mark Phillips,...
On your Sipura web config go to Voice/PSTN Line tab (on advanced mode) and check you PSTN to VoIP config. See what's the dial plan used. For example mine looks...
Due to a bug in asterisk 1.4.18, the package will not be available in the optware feeds: http://bugs.digium.com/view.php?id=11971 The slugos feeds are not...
Hello, I tried to integrate to Gtalk. One of the requirements is that the gtalk and jabber modules are loaded. However the asterisk log shows that they are not...
Hi, You need to install the iksemel package http://ipkg.nslu2-linux.org/feeds/optware/ddwrt/cross/stable/iksemel_1.2-2_mipsel.ipk Here is a link to a how-to...
Sorry did not mention in my previous message that the links are for a mipsel based package. You may need to get the package from a different feed. Brian --- On...
Hello Jaap, When you install asterisk, during the installation, it will show you a list of suggested packages. On your box, run 'ipkg install iksemel', It...
You just need install ikesmel package for your device. No need to uninstall anything. I don't know what system you are putting it on, but you need the optware...
The config should be pretty much the same ... 1.6 is still beta, so don't expect to find tutorials on it :) Check the sample config files for 1.6 and rebuild...
I think it's a bit diferent. I've reinstalled the asterisk, getting nslu to the latest unslung, however it's been a litlled complicated to manage this to work....
hi im new at asterisk and need some help compiling my modules.conf file i need tp know that if i want to use the set caller id function in my dialplan or any...
Hi all, i have to install Asterisk on my NSLU2 with Unslung 6.10 beta on it. I had a past experience in configuring asterisk to work with Skypho (an italian...
(cross posting to just nslu2-general, nslu2-linux & nslu2-asterisk) Just passing the word along for those wanting some NSLU2s http://flingthing.com Get an RSS...
I'm building the Asterisk 1.2 distribution using the instructions provided at http://www.nslu2- linux.org/wiki/Optware/AddAPackageToOptware I'm compiling...
Asterisk is available in optware feeds as a ipk package for versions 1.2, 1.4 and 1.6 for various hardware platforms. The instructions you are talking about...
This is a little off topic, but does have a connection to Asterisk 1.6. Barracuda Drive are giving away a free version of their software specifically for the...
Hello, I was really happy surprised the chan_mobile became available on asterisk 1.4. However I do not get it working. I installed asterisk14-chan-mobile...
Hello Jaap, It seems that you are using openwrt and you are trying to mix asterisk openwrt packages with asterisk optware packages. This will not work. You...
Hello Ovidiu, Thanks for your response. You are right I'm mixing openwrt and optware packages. I will stop that. When I want to use chan_mobile I have to...
Ovidiu, Yes I might try the 1.6 on a test NSLU2. I do not like to fool arround with oprational asterisk (I'm to dependant on it) It may take a week or two...
Hello, I'm anxious to get chan_mobile up and running and therefore installed asterisk 1.6 and chan_mobile (optware). Also I installed bluez meaning:...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
