Hello, I was really happy surprised the chan_mobile became available on asterisk 1.4. However I do not get it working. I installed asterisk14-chan-mobile...
Hello Jaap, It seems that you are using openwrt and you are trying to mix asterisk openwrt packages with asterisk optware packages. This will not work. You...
Hello Ovidiu, Thanks for your response. You are right I'm mixing openwrt and optware packages. I will stop that. When I want to use chan_mobile I have to...
Ovidiu, Yes I might try the 1.6 on a test NSLU2. I do not like to fool arround with oprational asterisk (I'm to dependant on it) It may take a week or two...
Hello, I'm anxious to get chan_mobile up and running and therefore installed asterisk 1.6 and chan_mobile (optware). Also I installed bluez meaning:...
How does one play Ulaw files? I have been scouring the net for a player and I cant seem to find one.Does anyone know which ulaw sound file is used for...
This is what I get when I make a call from my asterisk to my mobile and then hangup Could someone please explain why I get Sip_Outgoing-VoipBuster/h as it a...
... I have exactly the same problem but I just assumed it was due to packet loss on the WAN side. What kind of a broadband link do you have? - Julian...
Hi, I'm a newbie, and would appreciate if anyone can point me to any preconfigured Unslung/openwrt/Debian package or config files to setup asterisk with...
Hey. I'm trying to get intercom/paging functionality working in my house with my Budgetone phones. I have a great HOWTO on how to get it working with these...
So, as with 50 other people in this group, I am having sound quality issues with file playback. Others have described it as "stuttering". I am currently using...
Much appreciated. You just saved me a lot of grief. ~j ... _________________________________________________________________ Windows Live SkyDrive lets you...
app_page is using the memtme conference and this is using Zaptel. For conferencing, * need a digium card (for the conference bridge). So, it will not work on...
Try to install the alaw or ulaw sound packages. These are the least resource-intensive format. Also, check how much memory you have available when you play...
Here is some more information for your enjoyment. The crackling IVR quality is there no matter what I seem to do. It doesn't matter if I have 140 modules...
Are you testing this from a phone connected via your local LAN or via internet? Try to test this from your local LAN using a different device too ......
It should be OK to play GSM. Check what codecs you have enabled in sip.conf for your phones. You should have only ulaw (and/or alaw) enabled. The slug should...
I have done this from both. I get semi-crackly dial tones from my incoming line and I get the same thing when I access voicemail locally from a SIP phone. ......
Here is the requested output during incoming calls through my provider (Vitelity). Here is the channel information during an incoming call while all phones are...
RTP packets for ulaw (8Khz sampling, 20ms packetization period = 160 bytes payload) are not affected by the MTU, unless your path MTU is less than 200. ...
So let me back up a bit, then. The stuttering issue is local inside the house from a grandstream phone plugged in to the same ethernet switch as the NSLU2....
Could it be a router / switch / IP Gateway setting problem? I had a dodgy netgear hub which had similar problems a couple of years ago. ... the ... switch as ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
