Hello, you can use whatever, unslung, debian if printserver is what you will use your slug för, read here: http://www.nslu2-linux.org/wiki/HowTo/AddPrinter...
Thanks for the link. I've managed to eliminate that problem but now I still can't access the cups web page at 192.167.1.77:631 After some searching i found...
Tommorrow 10/20/09 2300UTC there will be an extended outage for Hardware and Software Maintainence of our web and package servers. Services such as: Wiki, www,...
I just upgrade the ScratchboxToolkitMultiCpu-2.3 to include toolchain/rootstrap for armev4b and mipsel using gcc-4.2.1 and uClibc-0.9.30.1. ( from Landley's...
If you find a solution then let me know - I have the same problem. Generally a restart of the slug cures it but it just took 2 restarts to find the 2nd disk...
I bought a "new" (but alas discontinued) NSLU2, a pair of 1.5T internal eSATA drives, and a pair of "almost" matching BlackX HDD USB/eSATA "docking stations." ...
My slug is overclocked & running stock firmware V2.3R76. Drive 1 is a 2TB drive; it's 2 1-gb drives in a dual-sata enclosure with the drives striped & set to...
Hmm perhaps the newer f/w does help - where did you get it...? Also I note that you have the bigger disk on port 1 which was one thing I considered as an...
I think I downloaded it from linksys' FTP site a few years ago. Their FTP site seems to no longer be available. Googling 'nslu2 2.3R76' will locate some...
I spent absolutely ages setting mine up about 2 years ago. I was up all night pulling my hair out and almost threw the slug in the rubbish. However, I...
I just bought an aftermarket nslu, and turns out, it makes a bad high pitched whine. It gets worse, when i connect the lan cable, and even worse when there's 2...
Hi, Could it be the beeper? I purchased a NOS NSLU2 off ebay, and it works fine except for a high pitch noise that like yours varies by what is plugged into...
Hi, It could also be a coil or choke that causes the sound if there are any DC/DC converters inside the NSLU? I don't have the schematics at hand right now to...
I have searched like crazy but am now stuck. My psu died while the slug was running firefly/unslung. I have a new psu but the slug still won't work. It never...
I have had connections drop with NTFS on my 80 GB USB Hard drive. I made a topic but I kept getting emails saying "Post to mailing list still pending" and one...
I copied 1 TB of files from one disk to another at the same NSLU2 (new 266MHz from factory). All okay! My housings are both IcyBox "IB-351 StUS-B" (one...
Well.. thanks for the suggestions. I guess, i have found the source of the whine. I'm pretty sure it's one of the coils, like Hendrik said. When i touch the L2...
Hello all. My USB box died, so took the IDE disc out and connected it to my XP box to make sure it was ok. Backed it up, so don't think I have lost anything,...
... Your laptop is "too busy." For the sake of argument, I'll assume it's of the same hardware caliber as your linux laptop and desktop, which work. IMO, you...
... Probably nothing; there's no evidence that chkdsk damages NTFS filesystems! ... Dunno. :) It's hard to go any further without a lot more information -- ...
... 2.3R63 Unslung 6.10 beta. After several self-imposed reboots, it recognised the drive correctly, but was very slow. Then finally, all it sees are the...
Thought I'd follow up on this in case anyone's interested. Tried a newly formatted NTFS disk in the new USB box. The only way it would work was if I removed...
I've had my NSLU2 unslung previously but was having problems setting up my Media Server and decided to start over from scratch. Everything seemed to have gone...
... Personally, I've tried several times to format a disk with the slug, but it always failed (it says "formatting", but never completes). Best to format it on...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
