I flashed OpenSlug-2.5-beta-firmware.zip with no difficulty, and had Linux up and running. It was nice to feel at home and find all the usual tools. I have...
I'm REALLY new the linux, but I read the confirm unslung page here http://www.nslu2-linux.org/wiki/HowTo/ConfirmUnslung and the #df and #mount doesn't look...
Hi, everyone, I just bought a used NSLU2 on ebay but am having some trouble: I installed everything according to the instruction. Now I can "see" the NSLU2 on...
I have an NLSU2 that I bought in the US and (after blowing the power supply) I would like to try and get a replacement power supply for the UK.. I asked...
... Any stabilized 5 volt/2 amper DC power source must be good for you. At most the plug (with the whole cord) should be borrowed from the old power supply. ...
Gabor Kiss [Bitman]
kissg@...
Sep 1, 2005 10:36 am
2387
Any 5V DC power supply will be OK. Or you can use power plug adapter http://www.elect-spec.com/uadapter.htm HTH Petr JP> I have an NLSU2 that I bought in...
Partially answering one of my own questions (I know, bad). My post came out as HTML, I guess I missed some option. Will be more careful next time. ... Or just...
Your output looks ok and you are successfully unslung (the rootfs is definitely your hard disk). The wiki page is very outdated (for unslung 1.1), and should...
My Lexmark E210 was working flawlessly using CUPS and on /dev/usb/lp0 attached to the slug's USB DISK 2 port. One drive attached to USB DISK 1 port. Unslung...
Yes - it is a FAQ - 2.0 hubs don't work well on Unslung <=5.5. This is not only storage devices, but any devices. Please add this to the FAQ if the last guy...
Hi erliban, I suspect the previous owner changed the port number of the web interface to something different than 80. Try a few suspicious ports ... ...
Thanks Kai, I tried those ports but they didn't work either. I used the portscan you mentioned and got result like this: IP 192.168.1.1 (This is my router) ...
... Maybe. But I think this doesn't really matter, because a slug without any disks attached is more or less worthless - either unslung or openslug. ... right....
Also, I actually used the Sercomm tool mention on www.nslu2-linux.org to flash the firmware to the latest download from Linksys (2363) and still got the same ...
... Vielen Dank für die Antworten... ... I'm slowly coming to that conclusion too. Maybe it explains some of the headaches I had with stock Linksys F/W: too...
ResetSysConf is what you want to do. Something in the configuration is keeping you from accessing the admin pages - a reflash of firmware will not touch the...
It is SLUG's normal behavior. Even you re-flash the firmware, the network setting remain the same as was before re-flashing. KH> Also, I actually used the...
In message <df03ss+djfv@eGroups.com>, chandersawh <chandersawh@...> writes ... Looking through the latest online manual suggest that port forwarding ...
Thanks Byron, the ResetSysConf seems to be a daunting task for me but I'll give it a try tonight. ... __________________________________________________ Do You...
Go look in the list archive. -- Inge ... From: nslu2-general@yahoogroups.com [mailto:nslu2-general@yahoogroups.com] On Behalf Of Peter Campion-Bye Sent: 1....
... Erm, well *basically* all those available in the ipkg feed. They might not have been tested extensibly, but practically all of them work ootb. ... Regards,...
Hi, I´m now trying to run Openslug. Have previously tried FW r24 and r63. Also tried Unslung BETA 5.5. All the time, though, I have encountered instability of...
... Jason-- It ought to be relatively easy to find a replacement if you bring the dead one over to the nearest electronics shop. IIRC, it's 5V at 2A. HTH! C...
Any regulated plug top PSU that will deliver a couple of amps should do the trick. Check the polarity of the connectors. Try Maplin electronics. ... I have...
I tried to do the same last night. A ext3 main partition with an NTFS partition. NSLU2 did not like it so I formatted the whole disk as ext3. If you do not...
I get this problem too. I have two slugs, both unslung to hard drives. Both operate correctly with one disk attached, but as soon as second one is attched,...
... is not ... Ah, okay. I checked the FAQ, and it is in there. The strange thing is, why would the USB 2.0 hard drive I also have attached to the hub work...
Well, I tried ResetSysConf (I think I succeeded, I saw the "... Erase from 0x50040000-0x50060000: . " message), everything seems to be the same :-( Is it...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
