I mentioned this to linksys support myself with the suguestion that perhaps they could produce a hybrid set of partitions with a NTFS partition for data, EXT3...
... with USB support for $39 USD. It only supports 200W at 115V, and that only for a few minutes, but it should suffice for an NSLU2 and few drives. Great....
Hi all. I'm using the latest firmware (2.3.63) and I've noticed something interesting. I don't know if this was mentioned before, but a search turned up no...
Are you really sure the drive is OK? I put both drives from my failed Lacie boxes derectly on the IDE bus in my PC, and while this sped up the recovery ...
Greetings, I'm using my NSLU2 as a home media server, currently with a Maxtor OneTouch disk connected. This type of disk isn't designed for continuous ...
Hello, Maybe I am missing something here but I have my linksys wrt54g setup to assign DHCP address starting at .100 and above. Everything under the .100 is ...
... you could, like I have in the past, set the spindown for the drive and run the nslu2 off a 256Mb flash drive. Hopefully soon, at least with openslug, we...
# echo $PATH /opt/bin:/opt/sbin:/bin:/sbin:/usr/bin:/usr/sbin: Do you get that as well? If not, set the path. If you do get it, try # ls -l /opt/bin/man ...
I have followed various posts on creating ram disks etc with the goal of allowing my harddrive to spindown when it wasn't busy. My drive is a "Western Digital...
Thanks for the response Inge, Here are my results: # echo $PATH /sbin:/bin:/usr/sbin:/usr/bin # path=/opt/bin:/opt/sbin:/bin:/sbin:/usr/bin:/usr/sbi # man man:...
I not able to install, however "ipkg update" succeeds without any problems. Always receive http error 404 etc. Is there something wrong with the feeds? /Uffe...
If your router can do "static" DHCP, your laptop will always get the same IP address from the DHCP server (you link an IP in the "100" range to the MAC address...
I've got the NSLU2 running OepnSSH and it's currently available on my home network. However, I would like to open my router firewall to let me SSH in from...
Take a look at this search of nls2-linux http://groups.yahoo.com/group/nslu2-linux/messagesearch?query=2.7%20binary I don't think 2.7 is ready for users yet....
Yeah, the drive is fine. I don't have a fullsize system to connect it to but when connected to my laptop through USB Scandisk reports no issues. Any ideas on...
... 20binary ... i.e. ... any ... something wrong ... Nice, taking in account that http://www.nslu2- linux.org/wiki/OpenSlug/HomePage refers 2.7 as latest...
... Well, I think it was said, that the "binary release of OpenSlug 2.7" is not ready for users. The "source release" has been officially released (see...
Hello, I've posted on http://www.nslu2-linux.org/wiki/Main/Articles (links should be approved by the wiki manager) The URL for an article in French about the...
Basically my advice to you is to not present any software to the Internet that has known vulnerabilities. It will get spanked, and right soon. Of course, I...
There is a list of tested USB chassis' on the NSLU2 website. It's in the wiki somewhere, buried. It has a list of known working external drive chassis'....
... I don't get this. When I log into the Linksys as admin through the web page served up by the standard Linksys firmware, it offers the ability to set a...
You'll have no need of Static DHCP *IF* your XP laptop never goes anywhere. Consider what would happen if you were to take your XP laptop to which you've...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
