Hi Neil, I have opened my slug now (need to unsolder the RAM chips and put new ones), and I looked at C119, its placement and connection together with other...
6856
neil_homan
Oct 23, 2007 8:24 pm
HI Johnni. I am about to try the board again to see can i get at redboot via the reset button - had no luck last time. I have debian on there so not sure of...
6855
Johnni Friis
mail_johnni
Oct 23, 2007 7:57 pm
Hi Niel, It looks like you only took a part of C119 of the board, and the board it self is not damaged. As you say, the pics arent very clear. My slug is at...
6854
neil_homan
Oct 22, 2007 8:19 pm
Hi John, Sorry about the delay in getting back. Ended up using phone as a camera so sorry the results aren't too clear. Results are in the...
6853
juergen1962111111
juergen19621...
Oct 22, 2007 7:28 pm
Hi Marcel, thanks for your help. Large File Support works on my NSLU. Juergen...
6852
Sean Gibbins
bascule_the_...
Oct 22, 2007 6:45 pm
... Excellent! Close enough for me to stand corrected! ... Sean...
6851
Frank Reijn
fnijer_public
Oct 22, 2007 5:49 pm
Bill, it is my : - file server - ftp server - printer server - tftp server - asterisk server. Do I need to write more ? :-) billwright26 <wwright2@...>...
6850
John
jll370
Oct 22, 2007 5:44 pm
... But, add an X10 interface and the slug could control home appliances such as the air conditioner. You are right, of course, that a slug can't do...
6849
John
jll370
Oct 22, 2007 5:19 pm
... Linksys's do_scandisk/web interface is known to have problems. Have a look at: http://www.nslu2-linux.org/wiki/FAQ/RepairingDiskErrors...
6848
Sean Gibbins
bascule_the_...
Oct 22, 2007 2:04 pm
... Hi Bill, As an air conditioning unit? No... Sorry about that Bill - couldn't help myself! :-) Actually, that's not as daft or sarcastic as it sounds, as...
6847
billwright26
Oct 22, 2007 1:31 pm
I am thinking of purchasing a NSLU2 device, does it work well? Thanks, Bill...
6846
vw_man99
Oct 21, 2007 6:22 am
Hi All, I recently loaded the latest Unslung but seem to be having issues with the user quotas. I created a new user (test) and made sure it was only member of...
6845
henrikar
Oct 21, 2007 6:21 am
<http://www.openfsg.com/forum/viewtopic.php?t=5070&start=0&postdays=0&po\ storder=asc&highlight=> Hi, I just put my music browser up on sourceforge, in case...
6843
ivar.hamrin
Oct 21, 2007 6:21 am
Hi, bought a slug a few weeks ago and successfully unslung'ed it to a natively formatted disc. Everything went smoothly, including mounting a NTFS drive. Since...
6842
Sid Price
sidprice@...
Oct 21, 2007 6:21 am
Hi, I am a Windows user and I am unfamiliar with Debian/Etch and VMWare. I have installed VMPlayer and the Debian/etch appliance so that I can reflash one of...
6841
mackowiakp
Oct 18, 2007 9:39 pm
I use NSLU2 with UNSLUNG 6.8 version of firmware. I try to run FSCK both scheduled from WEB interface or by manual editing of crontab file. I moved /dev and...
6840
Johnni Friis
mail_johnni
Oct 17, 2007 5:23 pm
Hi, I would like some help, I can not access my slug from windows. I have a HDD attached to "disk1". The slug is running the original firmware. I just got the...
6839
Johnni Friis
mail_johnni
Oct 17, 2007 5:22 pm
Hi, If it is a decoupling capasitor, the board *will* work without it, the question is if the board it self is damaged too. Can you post a pic of the damaged...
6838
Mike Thompson
michael_pete...
Oct 15, 2007 3:49 pm
Fernando, It sounds like that could make a difference. I'll give it a try. Thanks for passing the link along. Mike Thompson...
6837
Fernando Carolo
fcarolo_nslu
Oct 15, 2007 1:31 pm
... Mike, did you check this wiki page http://www.nslu2-linux.org/wiki/FAQ/DealWithAutoSpinDownOnSeagateFreeAgent? A friend of mine had a similar problem...
6836
Mike Thompson
michael_pete...
Oct 15, 2007 5:56 am
Hi Colin, I have since given up trying to get my unslung NSLU2 to spin down. I did get to the point of getting the Maxtor one-touch to spin down, but then ran...
6835
Sean Gibbins
bascule_the_...
Oct 14, 2007 7:42 pm
... Bah! Not sure where all those crappy *s came from - my apologies, as they were nothing (intentional) to do with me! Sean...
6834
Sean Gibbins
bascule_the_...
Oct 14, 2007 7:39 pm
... *amazon's uk price is £53.26 or *€*76.51: ** http://tinyurl.com/2ptgqf ebuyer weighs in exactly the same: ** http://tinyurl.com/34xyw9 Dabs'll do it for...
6833
Frank Reijn
fnijer_public
Oct 14, 2007 6:16 pm
Hi Pete, Shall we setup our own webshop for the UK ;-) http://tweakers.net/pricewatch/92711/Linksys-NSLU2-(1x-100Mbps-2x-USB-2.0)-prijzen.html The green in the...
6832
Peter Chant
peter_chant_0
Oct 14, 2007 4:34 pm
... Interestingly they don't seem to be getting cheaper in the UK but are harder to find. Not sure if this means anything. Pete -- Peter Chant ...
6831
Neil Homan
neil_homan
Oct 14, 2007 2:56 pm
Thanks Rob. Much appreciated... I was hoping that someone might know the capacitor value from repairing a board already? Its the only i'd like to be sure about...
6830
Neil Homan
neil_homan
Oct 14, 2007 2:53 pm
Thanks for your replies. I actually damaged it opening the case. I had already done the de-underclock and was opening again to see about connecting a serial...
6829
Rob Lockhart
rob_lockhart
Oct 13, 2007 9:54 pm
... Subject: [nslu2-general] NSLU2 hardware damaged. Date: Fri, October 12, 2007 10:28 From: "neil_homan" ... Yes, it appears to be a capacitor (thus the "C"...
6828
Frank Reijn
fnijer_public
Oct 13, 2007 7:45 am
Neil, For this Huge amount of money... buy a new one!!!! You will remember these words when you come back home and found the NSLU2 has stopped just as you...
6827
Carl Lowenstein
carl_lowenstein
Oct 13, 2007 2:01 am
... I suspect that "damaged" means something like "broke it off the circuit board", perhaps by dropping something. I once had a 65535-bit core memory, reduced...
