Hi, Asking this on behalf of someone else They are wanting to stream music from a NAS device to a Pinnacle Soundbridge, instead of having a full size server on...
6945
mullasci
Dec 5, 2007 11:06 pm
I've just got an NSLU2 and updated it to R63. When making transfers from it using FTP I get very slow transfer rates (about 5mbit/s). This happens both if the...
6946
bloedmann999
Dec 7, 2007 5:39 pm
... Hi, I am doing this with normal unprotected mp3 files using Twonkyvision or Firefly. As I have no DRM protected files I cannot tell you if that would work...
6947
meisam_ras2020
Dec 9, 2007 5:07 pm
... daap...
6948
pinyilde
Dec 13, 2007 4:10 am
My router does not support or provide for sending Wake On LAN (WOL) packets to a local PC from the Internet so I'm wondering about the feasibility of remoting...
6949
neil_homan
Dec 13, 2007 12:49 pm
Presuming your nslu2 is unslung or has some other non-linksys firmware. If it's not you need to start reading the wiki at the bottom of this post below. In any...
6950
neil_homan
Dec 13, 2007 12:57 pm
ACTUALLY, the wiki link above merely lists the packages related to WOL. I've never installed it myself. But the command should be something like. ipkg update ...
6951
msage6146
Dec 14, 2007 8:15 am
Hi all, I have had a quick search on the web (incl. this group) and was wondering if you could help me with this question. My intention is to have openslug...
6952
Jeffrey
krace2003
Dec 14, 2007 8:15 am
Does anyone know how to find out what the Ethernet interface speed and duplex is on the Nslu2 and if so is there a way to change that to what i wish lets say...
6953
Jeffrey
krace2003
Dec 14, 2007 8:15 am
i believe so try this package out i think it will do the trick perl-wakeonlan i think you can run ipkg install perl-wakeonlan...
6954
phinas
Dec 14, 2007 8:15 am
I am running the newest version of unslung with perl installed. I can run my simple script if I use the command perl simple.pl but if I try to run it by...
6955
phinas
Dec 14, 2007 8:16 am
One way that I did it was to install the php mod and run this script. <?php function WakeOnLan($mac) { // Create Magic Packet for($i=0;$i<6;$i++) $packet .=...
6956
Bob Cox
bobcox1955
Dec 14, 2007 9:29 am
In article <fjsrsc+i74n@eGroups.com>, ... [snip] Do you have: #! /usr/bin/perl as the first line of simple.pl ? (assuming that /usr/bin/perl is your path to...
6957
James Dougherty
phinas
Dec 14, 2007 11:37 am
Bob, Thanks for the quick response. Yes I have #! /usr/bin/perl in the beginning of the script. When I go to that directory you see perl so I believe that is ...
6958
James Dougherty
phinas
Dec 14, 2007 11:43 am
Bob, Am I correct to believe that I need to get my install to be able to execute from a ./ before I can make it a cron job? Thanks for the help, Jim _____ ...
6959
John
jll370
Dec 14, 2007 7:13 pm
... If you have perl simple.pl working that is enough. Just put /usr/bin/perl /path/to/simple.pl in as your cron command. By the way, for security, cron runs...
6960
James Dougherty
phinas
Dec 14, 2007 8:13 pm
Thank you so much! I got the ./ working and now onto cron. ;) Jim _____ From: nslu2-general@yahoogroups.com [mailto:nslu2-general@yahoogroups.com] On Behalf Of...
6961
remote4177
Dec 15, 2007 3:22 pm
I've got a ntfs usb drive that i'd like to be able to read and write to. I've read that ntfs-3g will suppor this functionality but I've run into roadblocks in...
6962
bubblethug
Dec 17, 2007 7:27 pm
... Either your package list is out of date or you're not running sid. In either event, http://www.debian.org/doc/manuals/apt-howto/ should help you out....
6963
Ulrich Dietz
hoodtz
Dec 20, 2007 8:50 pm
Hi there, caused by a disk crash I had to reinstall my nslu2. Now I do not get cupsd startet. After installation cupsd is running. Then I edit the ip range in...
6964
Ulrich Dietz
hoodtz
Dec 20, 2007 10:25 pm
Hi there, not editing the cupsd.conf seems to keed cupsd running (see message 6963) but, the web interface is presented without the gifs and nice ...
6965
Fernando Carolo
fcarolo_nslu
Dec 21, 2007 12:14 pm
... Install package cups-doc. It will add the missing content from the web interface, such as images, besides the online help. Regards, -- Fernando Carolo ...
6966
Ulrich Dietz
hoodtz
Dec 21, 2007 1:23 pm
I installed cups-doc. The gif files are all there, but are not read by the browser. Is there anything to switch on or to enable? The content ist there but in a...
6967
Fernando Carolo
fcarolo_nslu
Dec 21, 2007 4:53 pm
... Take a look at the /opt/etc/cups/cupsd.conf file and make sure that your network is listed at the Allow directives that control access to cups built-in web...
6968
stjohnstarkie
Dec 21, 2007 8:15 pm
I've been trying to use appWeb on my slug but am running into the known bug <http://www.nslu2-linux.org/wiki/Optware/AppWeb?from=Unslung.AppWeb> in 2.1.0-1...
6969
Ulrich Dietz
hoodtz
Dec 21, 2007 8:17 pm
the network is fine - all the pc are able to print. The access to the web-interface works - but only on a poor ascii base. regards Ulrich...
6970
Marcel Nijenhof
marcelnijenhof
Dec 23, 2007 12:41 am
... I have modified the optware make file and build the 2.4 version. If the test succeed i will upload the changes. After that you can install version 2.4 with...
6971
Rod Whitby
rwhitby
Dec 26, 2007 2:12 am
Christmas time is a good time to reflect on where our NSLU2-Linux project is today, and where it's going in the coming year (at least from my point of view as...
6972
alvindustin
Dec 26, 2007 5:44 am
hi all, i need help. i have several SAMBA shares on my SLUG and has setup several userid and passwords. when i go my network places in windows, i see all the...
6973
Sam
sam_m_reed
Dec 26, 2007 2:33 pm
In both Vista and XP, if you go to control panel, then user accounts, on the left hand side there is "Manage your network passwords" You should see the IP...
