... SlugOS works very nicely as an NFS client, as well as an NFS server. ... Well, you haven't provided any information on the issue in this email. If you've...
7483
Mike (mwester)
mjwest61
Jul 18, 2008 4:40 pm
... Safety Rule: ALWAYS reflash a known firmware onto all used devices; never trust what's installed on them. In the case of the NSLU2, the first flash should...
7484
blearyeyedyooper
blearyeyedyo...
Jul 18, 2008 6:48 pm
... Sorry for the vagueness of the previous posts. I was tired and burned out! This is probably more info than you need, but I'd rather give you too much info...
7485
Mike (mwester)
mjwest61
Jul 19, 2008 2:44 am
... Wireless networks seldom (if ever?) work with upslug2 or the Sercomm Firmware Updater. This is becoming a Frequently Asked Question -- can you add a note...
7486
John
jll370
Jul 19, 2008 3:07 am
Mike, ... Just curious: Why is that? John...
7487
blearyeyedyooper
blearyeyedyo...
Jul 19, 2008 3:17 am
... to ... present? ... Success! Wired directly the upgrade went beautifully! I have updated the wiki here ...
7488
beerman_wendel
Jul 19, 2008 9:23 am
... Hi Mike, just have a look at the top of the tread, please ... :-) Rigas...
7489
Rod Whitby
rwhitby
Jul 19, 2008 10:29 am
The upgrade protocol is carried on custom ethernet packets, at a lower level than IP, UDP or TCP. We've found that just about all wireless access points do not...
7490
Mike (mwester)
mjwest61
Jul 19, 2008 2:03 pm
... There is no thread at the top :) There are many different ways to get/read the email from the list, and not all viewers of the email will have all the...
7491
blearyeyedyooper
blearyeyedyo...
Jul 19, 2008 3:01 pm
I have successfully upgraded to unslung 6.10(thanks to all for the help). I still cant map my slug drives. The net access works fine and can add and delete...
7492
blearyeyedyooper
blearyeyedyo...
Jul 19, 2008 3:26 pm
... I can NOT add or delete files! I can only create shortcuts by drop and drag. Sorry for bad info!...
7493
beerman_wendel
Jul 19, 2008 6:21 pm
Well ... here comes the message again - I think it has all the necessary details ... Rigas Hello, I installed SLUGOS/BE on SLUG2 and want to attach an nfs...
7494
Mike (mwester)
mjwest61
Jul 19, 2008 9:07 pm
... It means you need to install packages. http://www.nslu2-linux.org/wiki/OpenSlug/InstallNFS Mike (mwester)...
7495
Mike (mwester)
mjwest61
Jul 19, 2008 10:00 pm
... In the Linksys Web GUI, on the Administration->System page you can set the workgroup. ... Mike (mwester)...
7496
blearyeyedyooper
blearyeyedyo...
Jul 20, 2008 2:18 am
... You wont believe this! I finally, out of blind frustration, changed the word "workgroup" to "WORKGROUP" and was able to map the drive! WOW......just...
7497
beerman_wendel
Jul 20, 2008 8:52 am
... etc\exports:) ... Thanks for the answer. I had worked through that howto and all the packages listed there have been installed on the NFS-Server (Slug1,...
7498
Scott
meshugga42
Jul 20, 2008 6:37 pm
Hi guys... my slug died while i was on vacation <sigh>. I have driver from www.fs-driver.org, but is complains that the ext3 partition needs recovery, and the...
7499
jl.050877@...
jll370
Jul 20, 2008 7:46 pm
... One option is to burn a linux boot CD (Knoppix, SystemRescueCD, or other), put it in your MS-box, and re-boot. You can then run e2fsck to repair the...
7500
Mike (mwester)
mjwest61
Jul 20, 2008 8:23 pm
... You need to install the package named "kernel-module-nfs" to get the client side of things. Once you do that, it should know about the nfs filesystem. If...
7501
beerman_wendel
Jul 20, 2008 9:12 pm
... 'nfs'" ... Hi Mike, THANK YOU VERY MUCH!! I installed "kernel-module-nfs", did depmode -a ... and voila, it works. Many happy thanx from Munich, Rigas...
7502
fizzerje
Jul 21, 2008 12:14 am
Hello A bit of a linux slug beginner here... I have just done the EnableFirewall mod on my slug but was getting a read write permission error running the...
7503
montyny1
Jul 21, 2008 9:33 am
Ok, so I thought it would be a simple thing to upgrade my slug to a newer disk. I thought I'd use a live GPartED cd. Everything seemed to go OK initially -...
7504
montyny1
Jul 21, 2008 11:41 pm
Mmm, wonder if anyone has an answer to this? It seems this is what's happening to my slug now too. After leaving it for a long tmie, it comes up with a steady...
7505
coupeborgward
Jul 25, 2008 6:05 pm
Just a quick question and I assume quite a simple one. The Linksys Firmware is providing a FTP Management tool (UI) for the FTP server. How is that implemented...
7506
Mike (mwester)
mjwest61
Jul 25, 2008 6:19 pm
... No difference. Mike (mwester)...
7507
montyny1
Jul 27, 2008 9:01 pm
So, after some trawling, I came across some stuff that pointed me to http://www.nslu2-linux.org/wiki/HowTo/ResetSysConf (Using netsetman - ...
7508
montyny1
Jul 27, 2008 9:04 pm
Just to share, I did seem to get this working - of course a lot harder than I ever imagined. I ended up doing a resetsysconf form the wiki. I did modify the...
7509
dwang5
Jul 27, 2008 11:42 pm
I'm having a similar problem trying to install samba 3.2. It seems that the interfaces on the nslu2 aren't being recognized by samba 3.2. I haven't been able...
7510
sd_vmax
Jul 28, 2008 3:21 am
I was using the slug in a normal fashion, then it must have froze, because no more response to network requests or files. I went to turn the slug off then on,...
7511
Rod Whitby
rwhitby
Jul 28, 2008 6:14 am
... These are the classic symptoms of a worn-out wallwart. Try a new power supply before anything else. -- Rod...
