I had the same story when I changed my 100 gb disk with a new one of 320gb capacity with the same usb enclosure. The problem was related to the external usb...
The problem is most likely related to the cache size (8MB, 16MB, ?) of the drive and has nothing to do with the drive capacity. Trendo Fabrizio Diversi...
Can you elaborate? Do you have a reference or a URL with more details? If this is so, it would seem to be something documentable for new users, and perhaps...
Dear All, A quick question: I'm seeing about 4000 interrupts per second from ixp400_eth, according to /proc/interrupts and vmstat. This is on my new...
... I just did a quick check and I'm seeing ~2000 interrupts/sec from ixp425_eth on my Unslung slug and ~4000 interrupts/sec from ixp400_eth on the DebianSlug...
I've recently upgraded my slug from the standard Linksys firmware to Unslung 6.8 with no problem. My overall intention is to use the slug as a NAS (obviously!)...
... Are you sure you are using DebianSlug 3.10, not the newer Debian installer? On a DebianSlug machine I get $ ls -l /initrd/linuxrc -rwxr--r-- 1 root root...
... The slingbox in Unslung 6.8 definitely does include wget $ /bin/slingbox --help BusyBox v1.00 (2005.12.27-01:15+0000) multi-call binary Usage: busybox...
Hi,
Sean Carolan schrieb:
> Thanks for your reply, Patrick. I don't have anything in /initrd, and
> I don't have a /linuxrc directory either. My root...
... installer? On a ... as /initrd ... disk (if it ... pivot root ... Hmm, I thought I was using 3.10, at least that is the image I downloaded. Here's some...
... Looks to me like you are using Debian/NSLU2 [1] (installed using the Debian Installer RC1). Gordon [1] http://www.nslu2-linux.org/wiki/Debian/HomePage -- ...
... Heh, shows what I know. Yes, I did use the image from Martin's website to install so I am using Debian/NSLU2. Now - how do I get it to boot from my...
I've found some unexpected things happening with screen and cron on my Unslung NSLU2. I thought the problems might not be specific to the Unslung versions of...
Thanks for the info. To me it seems that it depends on some milliseconds the drive needs to start up - sometimes it works and sometimes not. ... 320gb capacity...
I also can hardly imagine that it is exactly the cache size because this is internal drive hardware. As I said in my other post I have the impression that the...
Hi, I installed openssh using ipkg; however I can't find openssh-sftp in the ipkg list. Erm, does that mean I'm missing out on a safe way to ftp? Or should I...
Hi, I'm struggling a with access to my slug from over the internet. The firmware option allows me to access the slug using (unsafe) FTP; further, as FTP...
... I've tried openssh on unslung and it definitely did work from outside my network. I only had to set port forwarding on my router. Some routers have odd...
On which os? (sorry, I did not read earlier msgs of this thread, it is always a good idea to keep the os name in the subject or in every msg.) I did...
... Are you telling your router to send incoming port 22 traffic to the slug? This might be called "port forwarding" or something else, depending on the make...
I am running SlugOS_BE from hard drive on DISK1. When attach another hard drive to DISK2, its partitions do get mounted at /dev/sdb1, .... However if I ...
... Using a 2 Gb usb flash drive I've tried with a swap partition of 130mb and the rest used for the main partition - same thing happens - stops midway through...
Smashing, it works guys! Port forwarding does it the trick. I'm now very happy with the Slug, smashing product, strange only that Linksys does not offer...
... Also: Be aware that your slug is now open to the world. Although SSH is a lot more secure than telnet it is not perfect, especially if you are using...
... Well they don't offer telnet either, just the web interface. Not really surprising, it's a consumer product and few consumers know anything about the...
I have the OpenSlug 3.1 release installed and working without problem. I switched ipkg to use the unstable feed and brought down the 2.6.19 kernel onto a disk...
So I just bought an NSLU2 today along with an Aptiva 256MB flash card (USB 2.0). After installing Unslung 6.8 beta firmware, I tried to format my flash card...
Hi, I am running Unslung V5.5 and have a Maxtor OneTouch USB drive that does happen to spin down OK when not in use. To do that I have /dev and /var on a...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
