... I use debian stable on NSLU and I'm suffering from the same devastating issue: on stuff downloaded I get ext3 read performance from my HD in the order of...
Hello Chris, it may be easier to use a i386 platform PC. I bought an Asus 900A netbook (Atom CPU) for 200 EUR. It has 1 GB RAM, 8 GB SSD and a 9" LCD (1024x600...
Hi Rudolf, thanks for your answer. ... I'm thinking about alternatives too, but I want a server that is absolutely silent. Also I already have the NSLU2 (it...
... Thanks Mike. I replaced the init-functions(log_daemon_msg,log_end_msg, log_success_msg) with echo and there didn't seem to be a need to modify any of the...
I tried to flash from Debian to openwrt and after the flash, the NLSU2 tried to boot (I saw on my DHCP server it retrieved an IP address but remained not...
... Openwrt has 192.168.1.1 as its initial IP address. Usually this is what your router has so you maybe have to change your router's address temporally or...
Thanks, It seems it is not the problem. I really thought the NLSU2 was bricked because upslug2 systematically failed afterwards but I eventually succeeded in...
I am trying to get a webcam working with an NSLU2. Does anyone have a link for these drivers? pwc.o videodev.o Else, please email them to me. TIA Bob...
Hi, I recently had the misfortune of my 4GB pen drive bailing on me. Without any apparent explanation, the thing just wouldn't power up any more so I lost all...
... For others who may have this problem, it turns out these are installed by issuing the command ipkg install kernel-module-pwc Then you need to do the...
... I've had a number of pen drives fail... and none of the failures had anything to do with the NSLU2 (I don't even use a pen drive on my slug). Most of the...
Yeah I agree with your hypothesis. Was just wondering if possibly the connectors to these drives were more susceptible to power surges than the data integrity...
I tried to get a webcam onto the Slug, but each way I tried, it required X to be installed. I don't really have enough space to install an X-server. If you do...
... No. There are wiki pages that describe attempts to do this for Unslung, with generally poor results. The fundamental problem is that the Linksys firmware,...
Hi there, maybe this is offtopic to this list but I updated my Debian Lenny on my NSLUS with some common updates (incl. new kernel) which were delivered by ...
Hi, mi NSLU2 works fine (unslung, 640 GB USB disk on port #2), but the status led is permanently flashing green, and it never beeps back from a reboot. Please,...
After I got my NSLU2 working just right, I shut it down, pulled the pen drive out, and plugged it into my lappy (an ASUS eee PC). I plugged in another,...
Hi, thanks for the link. 8-) But it helps not with the kernel problem. (with exception of your advice: "Never touch a running system!" ;-] ) What shows "ls...
... An upgrade shouldn't be a problem and the kernel should fit in flash. We once generated NSLU2 images with a wrong (too small) kernel partition and I...
One on my intended uses for getting a Slug was to move a IPP print service off a really old Ubuntu box (circa 1999). CUPS on Ubuntu is configured to print to...
I thought I knew how to make a program run automatically on boot, but for some reason I just can't get it to work on the slug. I'm running slugOS/BE and I...
