Hello, I have already setup a NSLU2 working with SlugOS 4.8 beta. Now I wanted to setup a second NSLU2 with SlugOS 4.8 beta. I did so with upslug2. My problem...
24305
Mike Westerhof
mjwest61
Feb 19, 2010 2:54 am
... A bit over a year now. ... http://www.nslu2-linux.org/wiki/SlugOS/InstallandTurnupABasicSlugOSSystem should tell you what you need to know to get started...
24304
laurent.mazier
Feb 18, 2010 10:42 pm
I have successfully tested the new pyhton25-2.5.5-2 package. Working fine.. Thanks again Brian....
24303
oabroad
Feb 18, 2010 8:09 pm
Not sure how long 5.3 has been around, I had played around with Unslung and 3.1 quite a bit but after dealing with a PSU failure I recently reassigned an old...
24302
laurent.mazier
Feb 17, 2010 10:51 am
Thanks for your help Brian ! Elmer....
24301
marbordom
Feb 17, 2010 6:28 am
I just tried this on my nslu2 running debian lenny 1) It does not work when using AppleVolumes.default: /home/user "user" and the default afpd.conf 2) It does...
24300
Brian
brian_zhou
Feb 17, 2010 2:39 am
Thanks for reporting the problem. I made the change for python 2.5.5 to explicitly use ucs4 again. Package is available for syno-x07 feed, packages for other...
24299
laurent.mazier
Feb 16, 2010 12:18 pm
Hi, I have recently upgraded python 2.5 on syno-x07 target. Previous version was python25-2.5.4-2 new one is python25-2.5.5-1 I am also also using...
24298
queNenni
k.louveaux@...
Feb 15, 2010 8:57 am
... -- ... -- ... The same here on my DS209. ipkg status: Package: bind Version: 9.6.1.3-1 Depends: openssl Status: install user installed Architecture: arm ...
24297
stsichler
Feb 14, 2010 3:50 pm
Hi all! Since many days I#M struggling with getting squeezecenter 7.3.3 to work. But it starts up, and then, after 20 seconds it dies without writing any error...
24296
M.J. Johnson
threeeyedtoad
Feb 13, 2010 8:55 pm
Well, after some additional attempts, it looks like I'm unable to even connect using afp from my Mac OS X machine. I followed the instructions: Finder-> Go ->...
24295
Stefano
bettega_stefano
Feb 12, 2010 7:48 am
Hi Nei, thanks for your answer. I tried it, and it works but not as I expected. It seems that opkg/ipkg-opt also downloads from the repository the packages to...
24294
SnakE
snake.scaly
Feb 11, 2010 3:46 pm
Here's what my /opt/etc/ipkg.conf says: src/gz cross http://ipkg.nslu2-linux.org/feeds/optware/ts72xx/cross/stable Obviously this device goes under the i-Stor...
24293
slackline
Feb 11, 2010 3:09 pm
... Use the '-test' switch to test what will be done without doing (as documented in the help (type 'ipkg --help' to view). Thus something like.. ipkg update...
24292
Stefano
bettega_stefano
Feb 11, 2010 1:13 pm
How can I list opkg/ipkg-opt updates available for already installed packages without installing them? I would like to know which packages I can update and...
24291
Brian
brian_zhou
Feb 11, 2010 4:13 am
I never heard of this device, and I did not even know this device can run optware. What feed is it using? I just tested on a qnap ts-219 (cs08q1armel feed) and...
24290
snake.scaly
Feb 10, 2010 3:50 pm
Subj. Here's a bit more detail: ~ # uname -a Linux i-Stor.RT-G32 2.6.15 #160 Thu May 29 14:11:48 CST 2008 armv4l GNU/Linux ~ # ipkg info coreutils Package:...
24289
jbronsted
Feb 8, 2010 10:02 am
... Thanks for the quick reply. Im not entirely sure how I determine which floating-point settings are being used. How do I determine this? I got the toolchain...
24288
Mike Westerhof (mwest...
mjwest61
Feb 7, 2010 3:21 am
... My first guess would be that your toolchain may be trying to use a different (unsupported) floating-point setting for some reason. Check your compilation...
24287
jbronsted
Feb 5, 2010 1:50 pm
Hi Im trying to compile bonjour for SlugOS 5.2 beta on a NSLU2: http://developer.apple.com/opensource/internet/bonjour.html However, ld tells me that the...
24286
marbordom
Feb 4, 2010 3:49 pm
... The answer is probably yes: You should be allowed to connect as guest with the config from the wiki. Actually I am guessing here because I have not set up...
24285
M.J. Johnson
threeeyedtoad
Feb 3, 2010 9:28 pm
Thanks, marbordom... this seems very helpful, and I'll give it a shot tonight. A couple of questions: - In section 1) below, where should I be authenticating...
24284
marbordom
Feb 3, 2010 5:53 pm
You need to mount the volume in which the sparsebundle resides manually before you setup Time machine for the first time ! Mac OS wont scan your network for...
24283
pulse_and_saw
Feb 3, 2010 3:04 pm
Hi, My Slug running Debian Lenny is successfully setup as a Time Machine disk. The biggest issue I had to overcome was with Netatalk, which I actually needed...
24282
M.J. Johnson
threeeyedtoad
Feb 3, 2010 12:45 pm
Hello, all. I've been successfully using mpd 0.15.7-1 on unslung 6.10. When I use on-board hardware, and route audio through a USB audio device, everything...
24281
zoltee
Feb 3, 2010 6:03 am
Hi, I am using transmission on my Asus rt-n16 through optware (ipkg-opt) and the latest version of transmission available for it is 1.80 which has some bugs...
24279
M.J. Johnson
threeeyedtoad
Feb 2, 2010 6:57 pm
Hello, all. I'm running unslung 6.10, and have followed the instructions found in the wiki to setup a share that can be used as a Time Machine backup for OS X...
24278
Net money
tomojmail
Feb 2, 2010 12:05 pm
l0pMF Welcome To Big Money PTC!d At BigMoneyPtc, we go beyond the expectations of your typical paid-to-click website. We cater to those who are looking for...
24277
Samuel Kroslak
samuel.kroslak
Feb 2, 2010 11:37 am
Hello, I have synology NAS with this new kernel, but cifs module exists only for older version (2.6.15) - ...
24276
w.vanderlaan
Feb 1, 2010 12:39 pm
I'm getting a Belkin Home Base F5L049EA and it looks like a very interesting device to port NSLU2 Linux to: - 4 USB ports - WIFI and wired LAN - appears to...
