Hi! I'm trying again to install debian in my nslug. The tarball from debian 6 not works for me and without serial port it's impossible see the boot log. The...
25090
dR
dystopianrebel
Oct 26, 2012 8:00 pm
I have a silly number of Slugs (using SlugOS and OpenWRT). I also have a SheevaPlug, a DNS-323, and a PogoPlug v2. I only know my version of the PogoPlug, but...
25091
Brian Wood
beww307
Oct 26, 2012 8:53 pm
... I have a Pogoplug, I think it's the original. According to /cat/proc/cpuino it's a Marvell SheevPlug reference board. This means you could buy a Sheevaplug...
25092
Ralph Green
severian@...
Oct 27, 2012 5:59 am
Howdy, I have setup a few of the Pogo-E02 models and they work pretty well. I actually bought my first Pogoplug just after I bought my first Slug. I never got...
25093
Harsh
harshbaste
Oct 27, 2012 10:00 am
Thanks for the feedback everybody. I'll probably evaluate more than one of the suggested options and settle on one that fits best. Just the idea that viable...
25094
Andrea Di Dato
napolicam
Oct 27, 2012 10:42 am
... You can try the TP-LINK TL-MR3020 router too. It basicly is a 3G router (no 3G modem inside, you have to use a dongle) but fundamentally it is a nice and...
25095
oddballhero
Oct 27, 2012 10:45 am
If you can love the slug you can love the plug. A stock plug is comparable to a beefed up slug running Unslung. Probably the best plug is the 1.2 GHz V2,...
25096
comdiftelecom
Oct 29, 2012 8:46 am
Hi all I read on DD-WRT website this Modem/router is supported device with Atheros chipset. I read something here ...
25097
underscoretom
Nov 3, 2012 8:15 am
I recently purchased a used NSLU2 with the intent of putting wview on it for weather station support. Upon installing the latest SlugOS per instructions, I...
25098
Michael
whyisntthist...
Nov 3, 2012 8:15 am
Hi, So I tried to send this to the maintainer of the transmission package, oleo@..., but it looks like his email is no longer valid. I've been trying to...
25099
Carlos Garces
carlosgarces...
Nov 3, 2012 11:23 am
Hi! Try the oficial repository of openwrt http://downloads.openwrt.org/backfire/10.03.1/ixp4xx_generic/packages/...
25100
Patrick Mcgillan
pmcgillan
Nov 3, 2012 12:56 pm
Can you ping it? Standard dos ping program should get answers which verifies not only that is alive, but you have the correct address. SSH is the only way as...
25101
Mike Westerhof (mwest...
mjwest61
Nov 3, 2012 3:33 pm
What instructions have you followed thus far? Here's the definitive page (all others should be considered obsolete or questionable at best): ...
25102
Patrick Mcgillan
pmcgillan
Nov 3, 2012 10:02 pm
I did pretty much everything on the page, except the Optware stuff at the bottom. I then installed lighttpd, perl, and rsync. When launching lighttpd, it will...
25103
underscoretom
Nov 4, 2012 3:19 pm
I couldn't ping it, no. As it turned out from googling I found a note that even if you use a static IP, it should be in the DHCP range. Once I did that, I was...
25104
Greg
gbeat5
Nov 4, 2012 3:39 pm
THIS is or react Internet Link, for SlugOS. Earlier link had a typo. http://www.nslu2-linux.org/wiki/SlugOS/InstallandTurnupABasicSlugOSSystem...
25105
Michael
whyisntthist...
Nov 4, 2012 4:46 pm
Thanks for the tip! How do I get my optware config to point to the opkg feeds? I tried adding the package url to /opt/etc/ipkg.conf like so: src cs08q1 ...
25106
Patrick Mcgillan
pmcgillan
Nov 5, 2012 2:53 pm
Its up and running fine, but I sure miss mc. Any quick clues on installing midnight commander. Maybe I missed something. opkg install mc - comes back and says...
25107
Mike Westerhof (mwest...
mjwest61
Nov 5, 2012 3:47 pm
You might try the optware feeds. The instructions on the bottom of the installation page tell you how to enable the optware feeds so that you can use "ipkg" to...
25108
Paulo Oliveira
pjaopjaopjao
Nov 19, 2012 10:30 pm
Hello! Can someone help? Need to update transmission ipk for my iomega ix-200. Maintainer email is not available any more. Thanks Paulo Oliveira De: Paulo...
25109
free2herb
Nov 19, 2012 10:31 pm
package: syno-e500 aria2 1.14.1 when I try to enable json rpc through cli... a error occured --unrecognized+option+'--enable-rpc any idea?...
25110
Carlos Garces
carlosgarces...
Nov 19, 2012 11:03 pm
Try the openWRT packages http://downloads.openwrt.org/backfire/10.03.1 ... Try the openWRT packages http://downloads.openwrt.org/backfire/10.03.1 On Mon, Nov...
25111
nas
hacketiwack
Nov 19, 2012 11:19 pm
Hi Paulo, I also was in this situation but for ddwrt. I successfully compiled the version 2.73 for ddwrt simply by changing the version in the makefile under...
25112
Ovidiu Sas
ovi_sas
Nov 19, 2012 11:39 pm
I updated the makefile. Binaries should pop up soon in the feeds. Regards, Ovidiu Sas...
25113
pjao.ct2jay@...
pjaopjaopjao
Nov 20, 2012 2:01 pm
Hi all! Thanks for yours fast reply! Ovidiu as updated that makefile and is now avaiable for all! Great job! Paulo Oliveira...
25114
comdiftelecom
Nov 29, 2012 11:49 am
... Hi Andreas, Have you got any informations? I would like to install it on Broadcom MIPS...
25115
onlyfrancy86
Dec 10, 2012 7:59 pm
Hi, I've installed apcupsd package on an armel cpu (QNAP TS-412) but seems that there is an incongruence, the version of the package doesn't correspond to the...
25116
Ovidiu Sas
ovi_sas
Dec 10, 2012 8:08 pm
As you see in your output, the binary is provided by debian and it is the stock installed version in /sbin. You will need to look under /opt (using full path)...
25117
Francesco Trentini
onlyfrancy86
Dec 11, 2012 4:34 pm
Thanks a lot, it helps! The problem was my PATH variable that export /opt/sbin after /sbin/. Francesco...
25118
dystopianrebel
Dec 14, 2012 4:20 pm
Better ARM support has been added to Linux 3.7. I see that there has been some discussion about the IXP420: ...
