Unless we get temperature readings from the cpu top inside the case which are low, I'd like to have answers from the specs/or from measurements for these: Q1:...
Hi all-- I made #17 on the turbo list.... Thanks for the tip on this, as it's really made a difference in my Slug's performance! BTW, I noticed, while I had...
... One thing to remember is that we are not *over* clocking this chip. We are simply running it at it's correct rated clock speed. There are plenty of other...
From: John Schettino ... The ARM architecture does, but the relevant support is not implemented in the XScale core (it's in the unimplemented PWRMODE and...
... After running "cat /dev/zero |gzip - |gunzip - > /dev/null" for more than three hours, the CPU was still not too hot to touch. It was warm, I'd estimate...
... project. ... Thanks, I'm building right now (already running for more than an hour..). I'm, however, using /opt/nslu2 as the directory. Hope that doesn't ...
... Firstly, remember that we are not really increasing the clock speed beyond what the part was designed to do. We're just adjusting it to run at the full...
O.k. following up on my own post. The build finally failed. The following error messages occurred over the whole build: First there were three wget errors, all...
... atftp seems to be broken at the moment. I moved it to BROKEN_PACKAGES. If you do a monotone pull (in the openembedded directory) you should get the change....
... libusb works. I've just created a sf.net account: daka, and I'll try to fix it. Never played with unslung though. But its just a couple of source-files to...
Well, I overclocked my slug tonight and got exactly the same problem when restarting it! I looked at the "dmesg" output (or /var/log/messages) after it finally...
... Ignore those. It's just trying to save you time by checking if it's on oesources first before trying to get it from the original CVS location. ... Known...
... BROKEN_PACKAGES. ... get ... Thanks for your help, Øyvind. I'm sorry, feeling very dumb. As I said before, I don't know anything about monotone, bitbake...
... My bad. Enter the openslug directory, then "source setup-env" and "bitbake -cclean atftp" to clean out the atftp build dir and stamps. Then you can try...
First apologies if this is elsewhere, but I can't find anything that relates to update issues and doesn't assume a router etc. So, I have dialup (just temp...
[Øyvind Repvik] ... What about power needs? Has anyone who has overclocked his slug measured any change in power consumption? I've done some measurements,...
Hey guys, you are absolutely great!!!! These values are perfect. I need to search for my soldering iron... :-) (Last use was 15 Years ago. May need a new one...
... Ok, I'm convinced. Off the resistor went. And I now see 263 Bogomips! I ran some read/write tests with the slug over nfs and I got: Write (to slug): 1.9...
... Thanks, that one worked. It took another 3 hours to build but now my slug is running on openslug. :-) Next steps are: - Reduce read/write access to the...
... Did you update the database at http://groups.yahoo.com/group/nslu2-linux/database?method=reportRows&tbl=11&sortBy=1&sortDir=down&start_at=20 We would...
... Ok, I've looked a bit at it. Here is what I get: http://david.thg.se/saker/libusb/sane/tmp2.jpg I get the same thing from both scanimage and from saned. ...
Hi, I want to ask to the status of the wish lists. There are multiple wish lists on the wiki site: http://www.nslu2-linux.org/wiki/Unslung/PackageWishList ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
