Hello all, I have OpenBook 6 and an HP5200C scanner. The scanner is unpredictable. It wasn't always this way but now will scan a few pages and then when I...
Paul Ferrara
pferrara@...
Jul 3, 2005 1:27 am
8494
try unplugging and re plugging the USB cable on both sides and the power cord. this will remove tarnish buildup make sure the mechenism lock in the back is not...
Thank you for your response. I'll check the E-bay thing, have already done the plugging and unplugging of chords; it only works for a short time and then the...
Paul Ferrara
pferrara@...
Jul 3, 2005 4:43 am
8496
Paul, Recently I started running OpenBook 6.01.36 on a machine with 128 MB of ram running Windows 98 second addition and for a while all was fine. In an ...
Kelly, Interesting stuff you've encountered. Not sure how much it actually changes anything, but I use XP instead of 98. As for the rest, I haven't had any box...
Paul Ferrara
pferrara@...
Jul 3, 2005 5:51 am
8498
if you have more than one USB port try useing another port. ... From: "Paul Ferrara" <pferrara@...> To: <openbook-users@yahoogroups.com> Sent:...
another thing to check is that openbook is useing the hp5200c driver. i don't remember how to do this for version6. i think you have to start a install of...
can you tab to them? if it says graphic you can give the buttons graphic descriptions with insert e but the mouse pointer has to be on the button to do this. ...
When in Openbook, press alt a, then arrow down to scanner selection and press enter. There should be several choices. Pick the one you think most appropriate,...
D Hansen
donald801@...
Jul 3, 2005 7:45 am
8503
Should it say scanner SCL 5100-5200 etc.? Paul ... From: "D Hansen" <donald801@...> To: <openbook-users@yahoogroups.com> Sent: Sunday, July 03, 2005 3:55...
Paul Ferrara
pferrara@...
Jul 3, 2005 7:23 pm
8504
I do and I have with generally the same result; thanks much. Paul ... From: "NET BAT" <netbat@...> To: <openbook-users@yahoogroups.com> Sent:...
Paul Ferrara
pferrara@...
Jul 3, 2005 7:24 pm
8505
I'm sorry I don't understand what you are explaining. What are you teaching me to do? Paul ... From: "NET BAT" <netbat@...> To:...
Paul Ferrara
pferrara@...
Jul 3, 2005 7:28 pm
8506
mine says unknown twain driver useing hp 5200c ... From: "Paul Ferrara" <pferrara@...> To: <openbook-users@yahoogroups.com> Sent: Sunday, July 03,...
Right. ... From: "Paul Ferrara" <pferrara@...> To: <openbook-users@yahoogroups.com> Sent: Sunday, July 03, 2005 2:19 PM Subject: Re: [OpenBook]...
D Hansen
donald801@...
Jul 4, 2005 8:09 am
8508
I played around with the scanner selection before with no luck, but when I checked my scanner selection today it was on HP Twain 3200-4300 Series. I thought...
Does choosing what engine you use, Acupage or Finereader, effect the scanner at all? Also what OS are you using? Paul ... From: "Kelly Hill"...
Paul Ferrara
pferrara@...
Jul 4, 2005 1:55 pm
8510
Paul, Now this gets a little tricky. I'll have to tell you what I believe. Hopefully, someone with more technical understanding will read this and correct me...
Hi again listers, Ever since I reinstalled Openbook 7.02, I get a dialog box every time I run the program asking me to select a synthesizer, either IBM, or the...
Larry Higgins
lhiggins@...
Jul 6, 2005 11:02 am
8512
I think you are right, so what settings do you have in both areas? Paul ... From: "Kelly Hill" <kellmaster1@...> To: <openbook-users@yahoogroups.com> Sent:...
Paul Ferrara
pferrara@...
Jul 6, 2005 12:51 pm
8513
Hi Larry, You wrote: Ever since I reinstalled Openbook 7.02, I get a dialog box every time I run ... Yes. I'm going by memory here and I don't have my PC up...
Tom Lange
trlange@...
Jul 6, 2005 1:23 pm
8514
this menu can be changed in the openbook folder for version 7. i do not know about version 6. look for viavol.ini. back it up just in case if it is there. ...
I have an Epson perfection 1676. and openbook 7.2 and I'm using xp pro. My problem is the scanner stops in the middle and I get the dialog that says scanning...
Eugene Baroni
meangene124@...
Jul 8, 2005 1:03 am
8516
did you check that the right scanner drivers are being used in openbook? have you tried running ob with the antivirus unloaded? reseat the cables and power...
I fixed it. I went back to the original usb port and it works again. ... From: "NET BAT" <netbat@...> To: <openbook-users@yahoogroups.com> Sent:...
Eugene Baroni
meangene124@...
Jul 8, 2005 2:52 am
8518
Hello, I am using Open book 6.1 with an ebson 1640 USB connection on a Windows XP Home machine. I have used this setup for more than a year now with no ...
My name is Brandon. I've had this problem as well. If I can loca the fix I'll send you the address. Brandon From: "Kelly Pierce" <kellyjosef@...> ...
brandon.mcginty@...
Jul 10, 2005 7:19 pm
8520
Try the following to fix the openbook error. go to the start menu press the letter r to activate the run box type or copy and paste: c:\windows\system32 move...
brandon.mcginty@...
Jul 10, 2005 11:13 pm
8521
Do you know for sure that your system is virus-free? Problems with this file being corrupted are symptomatic of at least one known virus. ... From: "Kelly...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
