On PowerNet 1.9.8 on my Treo 650 GSM Unlocked:

- check "Turn off 'Beam Receive' after"
- uncheck "Disable Power button while online" and all other settings
- plugged in

	 When "Disable AutoOff in cradle" is checked, the POWER (red)
button does not work.
	 When "Disable AutoOff in cradle" is unchecked, the POWER
button works properly.

	 PalmInternals shows PowerNet receiving the
notifications "hots" ("Hotsync started"), "sync" ("Hotsync
finished"), and "slpq" ("Ack about sleep").  "slpq" is also
notifying "Butler" and "AutoOffExtender", the other two showing
numerous other apps.

	 I DO have over 200 other apps, hacks, Das, panels, etc. on my
Treo, so it's possible there's a conflict.
	 Could someone else with a Treo 650 GSM Unlocked please
validate my scenario?

how can i be?

you can be asking a lot of questions:

how do you do it generally?
what are limitations?
how is it implemented?
what does it require of my application?
how does it work?
does does the system linker feel about this?
how compatible is it?
how future-proof is it?

etc... so i answered the only question you asked for sure: "can it be
done" :-)


--- In palmnest@yahoogroups.com, ojciecrydzyk <no_reply@...> wrote:
>
> > yes there exists a way to do this.
>
> Jesus, Dmirty, could you sometimes be more specific with your
> answers, please? :-)
>

---

To: palmnest@yahoogroups.com
From: ap85@...
Date: Thu, 23 Nov 2006 14:59:43 +0000
Subject: [palmnest] Re: YAHM problems on Treo 650

--- In palmnest@yahoogroups.com, "Bill Magnusson, Jr." <bmagg247@...>
wrote:
> On my Treo 650, with YAHM installed and FontHackV activated, I lose
> all access to my SD card. Any ideas?

My feeling is that FontHackV is not fully NVFS compatible. Try my
FontSmoother. :-)

ALex

arpruss wrote:

> My feeling is that FontHackV is not fully NVFS compatible. Try my
> FontSmoother. :-)

FontHackV works perfectly here, and handles fonts on SD card as expected
(including handling of card removals etc)


Regards,
--
"Daddy, what "Formatting drive C:" means?"...

  Marcin                       http://wfmh.org.pl/carlos/

> yes there exists a way to do this.

Jesus, Dmirty, could you sometimes be more specific with your
answers, please? :-)

--- In palmnest@yahoogroups.com, "Bill Magnusson, Jr." <bmagg247@...>
wrote:
>   On my Treo 650, with YAHM installed and FontHackV activated, I lose
> all access to my SD card.  Any ideas?

My feeling is that FontHackV is not fully NVFS compatible.  Try my
FontSmoother. :-)

ALex

Hi,

does anyone can give me a hint how to access the Alarm Table (probably
using AlarmGlobals?) on Palm OS 5? I know the way for Palm OS < 5 but
it seems it doesn't work with Palm OS 5. At least I tried it on the
simulator but didn't find anything which looked like the Alarm Table.

Thank you very much
Henk

--- In palmnest@yahoogroups.com, noriknzw2003 <no_reply@...> wrote:
>
> I would like to install traps on apis in 'netl'.
> I have tried a couple of things I can think of to trap the apis, but
> no luck. Is there any way to do this?
> Thanks,


yes there exists a way to do this.

I would like to install traps on apis in 'netl'.
I have tried a couple of things I can think of to trap the apis, but
no luck. Is there any way to do this?
Thanks,

Hi Everyone,

At one point I had purchased a copy of the Belkins driver, but that is
now lost to history. I've given the palm to my step brother who is now
trying to use the g700 keyboard. Does anyone know where I can either
get a working copy of the YAHM driver or another g700 driver that will
work with the sony version of the keyboard? Thanks!

I had the same problem. To fix it goto YAHM and in the top right
select A and make sure the G700 hack is selected.

Hey all,
   On my Treo 650, with YAHM installed and FontHackV activated, I lose
all access to my SD card.  Any ideas?

None public.

--- In palmnest@yahoogroups.com, ojciecrydzyk <no_reply@...> wrote:
>
> Wonderful. Are there any resources for that?
>
>
> --- In palmnest@yahoogroups.com, "Dmitry Grinberg" <dmitrygr@>
> wrote:
> >
> > yes it is possible.
> >
> >
> >
> > --- In palmnest@yahoogroups.com, ojciecrydzyk <no_reply@> wrote:
> > >
> > > I was wondering if it is possible to hack Handspring functions
> (whose
> > > names start with "Hs", e.g. "HsKeyCurrentStateExt"). Any clues?
> > >
> >
>

Please anybody help regarding usage of netlibrary along with exchange
manager

Wonderful. Are there any resources for that?


--- In palmnest@yahoogroups.com, "Dmitry Grinberg" <dmitrygr@...>
wrote:
>
> yes it is possible.
>
>
>
> --- In palmnest@yahoogroups.com, ojciecrydzyk <no_reply@> wrote:
> >
> > I was wondering if it is possible to hack Handspring functions
(whose
> > names start with "Hs", e.g. "HsKeyCurrentStateExt"). Any clues?
> >
>

yes it is possible.



--- In palmnest@yahoogroups.com, ojciecrydzyk <no_reply@...> wrote:
>
> I was wondering if it is possible to hack Handspring functions (whose
> names start with "Hs", e.g. "HsKeyCurrentStateExt"). Any clues?
>

> ref num? forget it. not in ARM world. u can patch it with a ARM
> native patch. YAHM cant do it.

What do you mean by ARM native patch?

I was wondering if it is possible to hack Handspring functions (whose
names start with "Hs", e.g. "HsKeyCurrentStateExt"). Any clues?

> Any constant string or function pointer reference requires a special
> kind of relocation (even ...

Thank you for the explanation (I wish yamh_dev manual to be some more
descriptive in such areas). I've spotted the patch but wasn't fully
aware of what would I need it for. If anyone would like to share his
patched build-prc (for linux), I'd be grateful not being forced to
build it myself.

Regads,
Marcin

--- In palmnest@yahoogroups.com, "Marcin Orlowski" <carlos@...> wrote:
> Today I took yahm_dev archive and built ChangeTitle example, just for
> fun. The code is pretty simple, builds nicely (arm-palmos-gcc 3.3.1,
> build-prc 2.3), but... it badly crashes on my Treo 650. If I remove
> all the strings from the oldtrap call (i.e. replace by NULL) - it
> works. Any Str... call - same effect. What basic do I miss there?

Any constant string or function pointer reference requires a special kind of
relocation (even
with -fPIC code due to the (somewhat broken) way gcc generates arm code. This is
called
".got" relative code. YAHM supports .got relocations but you need to use a
special version of
the build-prc. In the files section you can find the patch for build-prc that
produces the
required resources.

what about the keyboard driver?  will we be able to purchase it
again?



--- In palmnest@yahoogroups.com, Igor Nesterov <nest@...> wrote:
>
>
> No. YAHMLib, the YAHM engine still supported for now, so I have no
> intentions to open YAHM sources.
>
> Igor
>
> Marcin Orlowski wrote:
> >
> > --- In palmnest@yahoogroup s.com <mailto:palmnest%
40yahoogroups.com>,
> > Igor Nesterov <nest@> wrote:
> >
> > > I'm finishing my palmos development.
> >
> > If that's final, do you by any chance got plans to open YAHM
sources?
> >
> > Regards,
> >
> >
> >
>

Hi,

Today I took yahm_dev archive and built ChangeTitle example, just for
fun. The code is pretty simple, builds nicely (arm-palmos-gcc 3.3.1,
build-prc 2.3), but... it badly crashes on my Treo 650. If I remove
all the strings from the oldtrap call (i.e. replace by NULL) - it
works. Any Str... call - same effect. What basic do I miss there?

Regards,

No. YAHMLib, the YAHM engine still supported for now, so I have no
intentions to open YAHM sources.

Igor

Marcin Orlowski wrote:
>
> --- In palmnest@yahoogroup s.com <mailto:palmnest%40yahoogroups.com>,
> Igor Nesterov <nest@...> wrote:
>
> > I'm finishing my palmos development.
>
> If that's final, do you by any chance got plans to open YAHM sources?
>
> Regards,
>
>
>

No. YAHMLib, the YAHM engine still supported for now, so I have no
intentions to open YAHM sources.

Igor

Marcin Orlowski wrote:
>
> --- In palmnest@yahoogroup s.com <mailto:palmnest%40yahoogroups.com>,
> Igor Nesterov <nest@...> wrote:
>
> > I'm finishing my palmos development.
>
> If that's final, do you by any chance got plans to open YAHM sources?
>
> Regards,
>
>
>

--- In palmnest@yahoogroups.com, Igor Nesterov <nest@...> wrote:

> I'm finishing my palmos development.

If that's final, do you by any chance got plans to open YAHM sources?

Regards,

Hi Folks,

I'm hoping that even though Igor has laid down his palm tools, someone can
help me!

I'm trying to get a pointer to the palm os globals. In a mail some time
ago, Igor instructed me

   --
void *PalmOSGetGlobalsPtr(void);

with my libs from YAHM SDK. Also you can take it from mobile-stream native
ARM SDK.
---

well, I've downloaded the YAHM sdk, but can't see any sign of this.
Can someone help?

What I'm after is a simple way to get a pointer from my c code.
Thanks in advance,

Rob

I do appreciate all the hard work you put into the g700 driver for the
T3, but have you left us high and dry? Has it been released into the
public domain or open source communities? I finally found it and love
the fact I can now use my keyboard.

Mike

-------------- Original message --------------
From: "sergiorod666" <sergiorod@...>
The Logitech driver (PalmOS5) not work in T2 (OS 5 work fine, but not
in OS 5.2)
I'm user a TypeAway keyboard in my old m515 and drivers work fine,
but not in my T2.
I've tried to get registration from Palmgear too, without success.
I've send a mail to support@... and not response.
Can anyone help us?
Thanks in advanced
Sergio Rodriguez
Buenos Aires
Argentina


--- In palmnest@yahoogroups.com, dmccunney <dennis.mccunney@...>
wrote:
>
> On 6/4/06, Ferran VB <ferran.vidal@...> wrote:
> >
> >
> > I've got a Palm Tungsten T2 with a Logytech Typeaway  Keyboard.
I've tested driver
> > G700 for a month with a good result but now it's expired.
> >
> > I've tried to get registratio from Palmgear without success.
> >
> > Can you say how can I get registration??
> >
> > Thanks.
>
> Perhaps you should try Logitech's site?
>
http://www.logitech.com/index.cfm/downloads/software/US/EN,CRID=1806,c
ontentid=5641
> ______
> Dennis
>

The Logitech driver (PalmOS5) not work in T2 (OS 5 work fine, but not
in OS 5.2)
I'm user a TypeAway keyboard in my old m515 and drivers work fine,
but not in my T2.
I've tried to get registration from Palmgear too, without success.
I've send a mail to support@... and not response.
Can anyone help us?
Thanks in advanced
Sergio Rodriguez
Buenos Aires
Argentina


--- In palmnest@yahoogroups.com, dmccunney <dennis.mccunney@...>
wrote:
>
> On 6/4/06, Ferran VB <ferran.vidal@...> wrote:
> >
> >
> > I've got a Palm Tungsten T2 with a Logytech Typeaway  Keyboard.
I've tested driver
> > G700 for a month with a good result but now it's expired.
> >
> > I've tried to get registratio from Palmgear without success.
> >
> > Can you say how can I get registration??
> >
> > Thanks.
>
> Perhaps you should try Logitech's site?
>
http://www.logitech.com/index.cfm/downloads/software/US/EN,CRID=1806,c
ontentid=5641
> ______
> Dennis
>

On 6/4/06, Ferran VB <ferran.vidal@...> wrote:
>
>
> I've got a Palm Tungsten T2 with a Logytech Typeaway  Keyboard. I've tested
driver
> G700 for a month with a good result but now it's expired.
>
> I've tried to get registratio from Palmgear without success.
>
> Can you say how can I get registration??
>
> Thanks.

Perhaps you should try Logitech's site?
http://www.logitech.com/index.cfm/downloads/software/US/EN,CRID=1806,contentid=5\
641
______
Dennis