Some people complain about erroneous alarm processing with active
PowerNet. Sometimes, after (or before) night scheduled backup device
comes into strange condition and drain battery. Does anyone seend
this?

I'm going to holiday for one week.

Yep, the Info Screen numbers for network activity are the same for
in/out cradle (ie charging).

If I have both boxes checked 'Disable AutoOff while online'
and 'Disable AutoOff in cradle' then the Treo 300 does NOT lockup,
however it performs AutoOff normally when I remove charging cable.

-Scott Lovell

--- In palmnest@yahoogroups.com, "Scott Lovell" <slovell12@s...>
wrote:
> Correction to note below:
> Info screen shows Network activity when NOT connected online as:
> No active internet programs. (0)
> NetLib not open
> Status:Offline
>
> --- In palmnest@yahoogroups.com, "Scott Lovell" <slovell12@s...>
> wrote:
> > Ok. It still locks-up the Treo 300 when the timer kicks off and
> > the 'Disable AutoOff while online' is checked.
> > Info screen shows Network activity when connected as:
> >
> > No active internet programs. (0)
> > IF idx=0 name='ppp_'inst=0 status up.
> > in OK, out OK
> > IF idx=1 name='loop'inst=0 status up.
> > in OK, out OK
> > Status:Online
> >
> > Info screen shows Network activity when connected as:
> > No active internet programs. (0)
> > NetLib not open
> > Status:Offline
> >
> > I'll check with the charging cable next. Hope this helps for now.
> > There is something in the timer routine when checking online
status
> > that the Treo 300 does not like. However it used to work in
version
> > 1.0 so maybe we can figure it our.
> >
> > Let me know what else you might need from me. Thanks for spending
> > time on this.
> >
> > -Scott Lovell
> >
> > --- In palmnest@yahoogroups.com, "Igor Nesterov"
<i_nesterov@h...>
> > wrote:
> > > Try new beta from the same URL. Can you reproduce information
> from
> > INFO button from online panel in all possible states:
with/without
> > network, in/out of cradle

Correction to note below:
Info screen shows Network activity when NOT connected online as:
No active internet programs. (0)
NetLib not open
Status:Offline

--- In palmnest@yahoogroups.com, "Scott Lovell" <slovell12@s...>
wrote:
> Ok. It still locks-up the Treo 300 when the timer kicks off and
> the 'Disable AutoOff while online' is checked.
> Info screen shows Network activity when connected as:
>
> No active internet programs. (0)
> IF idx=0 name='ppp_'inst=0 status up.
> in OK, out OK
> IF idx=1 name='loop'inst=0 status up.
> in OK, out OK
> Status:Online
>
> Info screen shows Network activity when connected as:
> No active internet programs. (0)
> NetLib not open
> Status:Offline
>
> I'll check with the charging cable next. Hope this helps for now.
> There is something in the timer routine when checking online status
> that the Treo 300 does not like. However it used to work in version
> 1.0 so maybe we can figure it our.
>
> Let me know what else you might need from me. Thanks for spending
> time on this.
>
> -Scott Lovell
>
> --- In palmnest@yahoogroups.com, "Igor Nesterov" <i_nesterov@h...>
> wrote:
> > Try new beta from the same URL. Can you reproduce information
from
> INFO button from online panel in all possible states: with/without
> network, in/out of cradle

Ok. It still locks-up the Treo 300 when the timer kicks off and
the 'Disable AutoOff while online' is checked.
Info screen shows Network activity when connected as:

No active internet programs. (0)
IF idx=0 name='ppp_'inst=0 status up.
in OK, out OK
IF idx=1 name='loop'inst=0 status up.
in OK, out OK
Status:Online

Info screen shows Network activity when connected as:
No active internet programs. (0)
NetLib not open
Status:Offline

I'll check with the charging cable next. Hope this helps for now.
There is something in the timer routine when checking online status
that the Treo 300 does not like. However it used to work in version
1.0 so maybe we can figure it our.

Let me know what else you might need from me. Thanks for spending
time on this.

-Scott Lovell

--- In palmnest@yahoogroups.com, "Igor Nesterov" <i_nesterov@h...>
wrote:
> Try new beta from the same URL. Can you reproduce information from
INFO button from online panel in all possible states: with/without
network, in/out of cradle

By the way, the 'Disable AutoOff Forever' works correctly on the Treo 300.

It must be something in the function to check online status that is locking
it up.
___
Scott Lovell

Sent with SnapperMail
www.snappermail.com
from Handspring Treo 300

...... Original Message .......
On Thu, 24 Apr 2003 01:11:07 +0400 Igor Nesterov <i_nesterov@...>
wrote:
>Oops. There is no way to download rom from treo device.
>
>Try http://sodom.rtsnet.ru/powernet.powernet.prc .
>

I posted my attemps to your yahoo news group. The stay on in cradle
works... But the stay online doesn't. This apparently broke somewhere
between version 1.0 and now. 1.5 doesn't work either, but I didn't have any
earlier version to try.
___
Scott Lovell

Sent with SnapperMail
www.snappermail.com
from Handspring Treo 300

...... Original Message .......
On Thu, 24 Apr 2003 01:11:07 +0400 Igor Nesterov <i_nesterov@...>
wrote:
>Oops. There is no way to download rom from treo device.
>
>Try http://sodom.rtsnet.ru/powernet.powernet.prc .
>

Version 1.5 has the same problem with the 'Disable AutoOff when
online'. In fact, it locks-up the Treo 300 when it is selected and
you let it time out while on line. (this lockup also happens in
version 1.7 if I uncheck the 'Disable AutoOff when in cradle'.

I did notice that when in the PowerNet Info screen, while i'm
connected, the activity report says 'No active internet programs' but
the NetLib is open and shows activity. I hope that helps.

I'm going to have to go back to version 1.0 until you can figure this
one out.

-Scott Lovell

--- In palmnest@yahoogroups.com, "Scott Lovell" <slovell12@s...>
wrote:
> Ok. I guess I should have downloaded and tried version 1.7 before I
> put in my feature request.
>
> I see that you added the checkbox for 'Disable AutoOff in cradle'.
> This works on the Treo 300 just as it should. Excellent.
>
> Here's the bad part. The 'Disable AutoOff when online' no longer
> works. This worked in my previous version which was 1.0 however it
> does not work on the Treo 300 in version 1.7.
>
> Can you add the code back that was able to detect the on-line
status
> for the Treo 300?
>
> I am going to go try the 1.6 version and see what that does. Let
you
> know soon.
>
> -Scott Lovell

Ok. I guess I should have downloaded and tried version 1.7 before I
put in my feature request.

I see that you added the checkbox for 'Disable AutoOff in cradle'.
This works on the Treo 300 just as it should. Excellent.

Here's the bad part. The 'Disable AutoOff when online' no longer
works. This worked in my previous version which was 1.0 however it
does not work on the Treo 300 in version 1.7.

Can you add the code back that was able to detect the on-line status
for the Treo 300?

I am going to go try the 1.6 version and see what that does. Let you
know soon.

-Scott Lovell

Sorry. I do not have the Treo ROM image. Unless there is some way to
send it from my phone, I don't know how to get that.

-Scott Lovell

--- In palmnest@yahoogroups.com, "Igor Nesterov" <i_nesterov@h...>
wrote:
> Can you upload treo rom image to files section? I'm still waiting
for
> account with access to image roms.

Can you upload treo rom image to files section? I'm still waiting for
account with access to image roms.

You are correct. The Treo 300 version did NOT implement the "stay on
in cradle" feature in General Prefs as other devices did. The
checkbox just is not there. I have always hated that fact about the
Treo 300.

I would love it if you could implement it. It would be very valuable
for Treo 300 owners.

Thanks for your consideration.
If you do decide to implement. I will be happy to be a tester for you.

-Scott Lovell

--- In palmnest@yahoogroups.com, "Igor Nesterov" <i_nesterov@h...>
wrote:
> What about "Stay in cradle" checkbox at General page of Prefs? It's
exactly
> what you need. All 3.5+ devices, that I have seen has sucj option
(PalmV,
> Handera...). If Treo has no such option, but OS version is _really_
3.5, I
> can implement it.
>
>
> ----- Original Message -----
> From: Scott Lovell
> To: palmnest@yahoogroups.com
> Sent: Wednesday, April 23, 2003 4:06 PM
> Subject: [palmnest] New Feature Request
>
>
> I love the PowerNet ability to prevent AutoOff when online. Do you
> think you can add "prevent AutoOff when charging"? I have a Treo 300
> and that feature is not part of the operating system as it is on
> later versions of the OS. The Treo 300 uses OS 3.5 only.
>
> -Scott Lovell

What about "Stay in cradle" checkbox at General page of Prefs? It's exactly
what you need. All 3.5+ devices, that I have seen has sucj option (PalmV,
Handera...). If Treo has no such option, but OS version is _really_ 3.5, I
can implement it.


----- Original Message -----
From: Scott Lovell
To: palmnest@yahoogroups.com
Sent: Wednesday, April 23, 2003 4:06 PM
Subject: [palmnest] New Feature Request


I love the PowerNet ability to prevent AutoOff when online. Do you
think you can add "prevent AutoOff when charging"? I have a Treo 300
and that feature is not part of the operating system as it is on
later versions of the OS. The Treo 300 uses OS 3.5 only.

-Scott Lovell

I love the PowerNet ability to prevent AutoOff when online. Do you
think you can add "prevent AutoOff when charging"? I have a Treo 300
and that feature is not part of the operating system as it is on
later versions of the OS. The Treo 300 uses OS 3.5 only.

-Scott Lovell

http://sodom.rtsnet.ru/yahm/FriendlyAlarm.htm

1. Clicking on alert in attention list show window with complete text.
2. Now hack emulate alert call by pressing default button.

--- In palmnest@yahoogroups.com, "Igor Nesterov" <i_nesterov@h...>
wrote:
> "disable wake with hardkeys" option added.

http://sodom.rtsnet.ru/powernet/powernet.prc

"disable wake with hardkeys" option added.

* Backlight control for P{almOS5 devices added.

On Thu, Apr 03, 2003 at 08:47:11AM -0000, Igor Nesterov wrote:
> > http://sodom.rtsnet.ru/powernet/PowerNetTT.prc
>
> Try the next version at the same URL. According to error message I
> can read backligh status.

It works now!

Thanks,
Thomas

--
Email: rufus@...  (at work: tkoester@...)
http://rufus.o-town.de/

> http://sodom.rtsnet.ru/powernet/PowerNetTT.prc

Try the next version at the same URL. According to error message I
can read backligh status.

On Mon, Mar 24, 2003 at 02:08:36PM +0300, Igor Nesterov wrote:
> Try this version. If it doesn't work, I don't know any way to turn backlight
> off programmatically
>
> http://sodom.rtsnet.ru/powernet/PowerNetTT.prc

Thanks for trying, but it still doesn't work:

Hardware68L.c, Line: 1068
Calling HwrDisplayAttrs
w / set


Thomas

--
Email: rufus@...  (at work: tkoester@...)
http://rufus.o-town.de/

Try this version. If it doesn't work, I don't know any way to turn backlight
off programmatically

http://sodom.rtsnet.ru/powernet/PowerNetTT.prc

> Disabling AutoOff while online works fine on my Tungsten T, but
> turning off backlight instead yields this error message:
>
> "An error occured in the application you are using.
>  Note the error code and contact the developer of this application:
>  (Sys 0505)(0, 746)"

     I have no TT, so all I can do is testing on simulator. Simulator is very
inadequate in simulating device hardware. I'll try another method for
backlight control.

Hi!

First I want to thank you for this really useful little tool.

Disabling AutoOff while online works fine on my Tungsten T, but
turning off backlight instead yields this error message:

"An error occured in the application you are using.
  Note the error code and contact the developer of this application:
  (Sys 0505)(0, 746)"

Thomas

--
Email: rufus@...  (at work: tkoester@...)
http://rufus.o-town.de/

http://sodom.rtsnet.ru/powernet

beta:
http://sodom.rtsnet.ru/yahm/powernet.prc

PowerNet come far from v1.0 and became powerful power manager.

Features:
- turn off backlight on hotsync
- turn off 'Beam Receive' after hotsync (PalmOS4+ bugfix)
- disable autooff timer
- disable autooff timer while device connected to network
- auto off time fine tuning
- turn off backlight instead autooff timer
- disable power button while device connected to network

* Improved turnoff on HotSync
* Redraw continues on minimization with active Handera Keyboard
* Minor bugfixes

test message, ignore it.