Having problems with message search?
The following comment regarding MEP is from Earl, who is member of the New Energy Congress.
----- Original Message -----
From: Earl
Sent: Monday, October 08, 2007 7:35 AM
Subject: Magnetic Electron Pump
Sterling,
I get very nervous when seeing pulse measurements used to calculate COP.
It would be very simple for Dale to put multi-pole low-pass filters on input and output so he could measure DC in versus DC out. Any Engineer can build a simple filter using 3 parallel capacitors in each leg, e.g. 10nF ceramic in parallel with 100nF ceramic in parallel with 100uF. I would suggest using three capacitor legs and two coils in each pi filter, for a total of 2 inductors and 9 capacitors in each filter. Capacitors, especially the ceramics should have short lead length. Inductors should not saturate. ONLY MEASURE DC.
Regards, Earl
EE 40+ years experience
I get very nervous when seeing pulse measurements used to calculate COP.
It would be very simple for Dale to put multi-pole low-pass filters on input and output so he could measure DC in versus DC out. Any Engineer can build a simple filter using 3 parallel capacitors in each leg, e.g. 10nF ceramic in parallel with 100nF ceramic in parallel with 100uF. I would suggest using three capacitor legs and two coils in each pi filter, for a total of 2 inductors and 9 capacitors in each filter. Capacitors, especially the ceramics should have short lead length. Inductors should not saturate. ONLY MEASURE DC.
Regards, Earl
EE 40+ years experience
[...]
Offline 
Send Email