Has anyone managed to write any new code for the PP? Remember, if you have written anything and would like to share it, you are free as a member of this group...
Jason, I haven't had much time to play with the PicPac lately, but I do remember it taking a LOT of audio to get it to decode reliably. - Frank, N3PUU...
... I've been sidetracked in my programming efforts, working too much to spend the time on it. However, once I figured out what the decode program was trying...
Does someone have some C code or at least a spec for the CRC (FSC) calculation on AX.25 packets? I'm having a little trouble working it out from the decode1...
Have you checked the FTP section TAPR's site for the AX.25 protocol specs? http://www.tapr.org I'm looking for specs on the protocol too. I have not checked...
Jason, No, the AX.25 spec does not seem to cover this. Let me know if you have any luck else where. Paul K5PAV ... From: J. Rausch To: picpac@yahoogroups.com ...
Jason, Just as I sent my reply, I found... http://www.joegeluso.com/software/articles/ccitt.htm Paul ... From: J. Rausch To: picpac@yahoogroups.com Sent:...
Well, as I try to understand the PIC I'll be asking some dumb questions... Dumb question 1. Where is the RAM addressed? DQ2. Is it shared with the Register...
Figured out DQ1 and DQ2. BTW, has anyone thought of modifing decode1 to send $GPWPL strings to a GPS? Paul Well, as I try to understand the PIC I'll be asking...
... I'd recommend one that's the right size, and that comes with a back light... buh-dum-DUM! Crystalfontz has a good selection, fairly decent pricing, and...
There are literally hundreds of displays like these that all use the same control chip. As long as you are looking at a character display module, and not USB, ...
Hi Guys, I ordered that exact LCD from CF for my PICPAC and it works great. I had to put a pretty hefty, low resistance rsistor in to handle the backlight...
Hi all, I have seen several msgs about the high volume level needed to drive the PICPAC. I was having the same problem. I had sent it back to Byon to check...
Good to know. With mine (Icom 706 and IC-W32A) I need almost no volume, if I use too much it does not decode. Paul ... From: Chris To: picpac@yahoogroups.com ...
Hello All, I am new to the group, I have built and used the tinytrak2. I am wanting to setup a serial communications link between my web server and my robot...
Hi all, I am interested in getting a picpac working as a tracker. The reason I want to use a picpac is so that the unit can be polled/queried for its position ...
Hi all, I can't find any 16x4 LCD in my area! (All are 20x4 types) So I began to test a 20x4 LCD with PICPAC but there were some (predictable) problems with...
Go all the way and go to www.crystalfontz.com and get one of their backlit
16x4's. I got one for my PICPAC, love it. J. Rausch KE4NYV www.ke4nyv.com RPC...
I noticed they also had paralley 16x2 OLED displays. Has anyone tried one of these? ... backlit ... -~--> ... --~-> ... http://docs.yahoo.com/info/terms/...
... I don't have the PICPAC, but I am an avid PIC programmer. So if you send me the code I'll look it over. And if you describe the predictable problems very...
I am new to groupand APRS and have a basic question: Has anyone used the PICPAC to display APRS messages from a remote APRS station/repeater/ Do the messages...
Has anybody yet written any code to get the picpac to transmit properly? I'm just picking up where I left off a while ago, and thought I'd see if anybody had...
List members, due to the recent "attack" of spam on many of the Yahoo groups, including all of mine, I have decided to make this group a Restricted/Closed...
Thanks Jason! "It is not our abilities, but rather our choices that define us." ... From: J. Rausch [mailto:ke4nyv@...] Sent: Wednesday, December 10,...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
