I'm looking for a hex file to decode aprs to the gps as a waypoint. I don't want to reinvent the wheel. I don't need the display to work. Thanks Rich L KB7YEB...
I'm not an audio sort of guy... in fact I'm not an analog or RF sort of guy so I'm struggling... I have a HT that has an earphone out with a suggested...
Tonight I broke out my PP and tried to load it up with some code from the samples directory and when I try to do a load the PP will accept the first line of...
Hey guys, My name is ANTZ, student at devry university and I just bought this PICPAC"16F876" from Byonics and it didn't come with the software and I'm having...
Hi, just wanted to let youins know I have a new group for anyone who is a pickup truck ham and has amateur radio equipment installed in it. You don't have to...
But to startUP Gavin is necessary to know if your PICPAC decode signals wen you put a PACKET AFSK from a radio signal at is input!! If you send me your...
I have my two PICPACs and have compiled, assembled and downloaded software to both. I connected the output of one (Pin 1 & 6) to the Audio In Jack of the other...
Is there code that will simply send a Hello World UI Frame from one PICPAC to be received by another? I would like to test all the hardware before starting to...
Most of the sample code knocking about is synchronous.. i.e. it is assembler than includes inline delays... I would like to make my code interrupt driven by...
Hi, I've just built my two PICPACs... thanks Byon... excellent kit. My initial task is to put groups of 10 bytes in one end of a PICPAC via the serial port and...
My cunning plan is to have an interrupt cause the sampling of each bit of the incoming data stream; I would sample each bit in 3 places; once in the center and...
I just went to CompUSA today and bought two Earthlink Mailstation 150 units for $9.99 ea. One is going to a relative who will use it for email but I got a...
Is the 16F876 going to have enough RAM and flash to accomodate a full APRS TNC and HAM HUD functionality? If not there is an alternative PIC chip worth...
Hi all, I can't find any 16x4 LCD in my area! (All are 20x4 types) So I began to test a 20x4 LCD with PICPAC but there were some (predictable) problems with...
Has anybody yet written any code to get the picpac to transmit properly? I'm just picking up where I left off a while ago, and thought I'd see if anybody had...
List members, due to the recent "attack" of spam on many of the Yahoo groups, including all of mine, I have decided to make this group a Restricted/Closed...
I am new to groupand APRS and have a basic question: Has anyone used the PICPAC to display APRS messages from a remote APRS station/repeater/ Do the messages...
Hi all, I am interested in getting a picpac working as a tracker. The reason I want to use a picpac is so that the unit can be polled/queried for its position ...
Hello All, I am new to the group, I have built and used the tinytrak2. I am wanting to setup a serial communications link between my web server and my robot...
Hi all, I have seen several msgs about the high volume level needed to drive the PICPAC. I was having the same problem. I had sent it back to Byon to check...
Figured out DQ1 and DQ2. BTW, has anyone thought of modifing decode1 to send $GPWPL strings to a GPS? Paul Well, as I try to understand the PIC I'll be asking...
Well, as I try to understand the PIC I'll be asking some dumb questions... Dumb question 1. Where is the RAM addressed? DQ2. Is it shared with the Register...
Has anyone managed to write any new code for the PP? Remember, if you have written anything and would like to share it, you are free as a member of this group...
