Hi om! I´ve just downloaded from file section the packet program written by Byon but I do not find any help file neither understand the diferrences from...
I haven't begun to program anything on the PicPac yet, but I was wondering about the bootloader. What if any provisions have to be made to a program for it to...
Would either of the following 2 display function in the PicPac with little or no modification? CFAH2004A-YMC-JP 20x4 STN Blue, Negative, Transmissive,...
Hi Josh, I assume you are looking at http://www.crystalfontz.com/ The first one looks like it would work fine. It probably would even screw into the existing...
Yes, I was looking at crystalfontz, sorry about that. Thank you for the info. I was hoping the 40x4 would hook right up so I could get more text on the...
I haven't looked at any of the links that were posted, but I can go ahead and assume any of the Graphic LCD's mentioned would be difficult to implement since...
Hello I am new here many thanks to the owner off this Board hello is there a version available which can read the GPS input data and send ax25 aprs beacon's ...
I have not been able to find one yet. All of the various parts are available but I haven't found anything combined to do everything in one. I am slowly trying...
I am starting to learn Morse (CW) using the Koch Method and I really would like a gadget to take around with me that will play the letter combinations I have...
Actually... I think I might be on to something... I can get the FX614 to output 500Hz or 1200Hz.... that should be about right and saves the sine wave...
Has anyone, Byon included, tried In Circuit Debugging? I see that J6 has connections for +5V, Ground and B6 and B7... it seems like this is a good candidate...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the picpac group. File :...
picpac@yahoogroups.com
Jan 9, 2005 10:55 pm
300
I've finally completed the first release of Pic-Trak. It is available for download in the files section of the PicPac Yahoo group. The download includes the...
Mark, this is great! I already have mine up and running on my bench tonight! The hex loaded fine and the config was a snap. Had it up and going in about 5...
Jason, "Not Connected" is diplayed on the GPS screen if the '*' near the end of the $GPRMC sentence is not seen for 30 seconds. I've had the software running...
... end ... I'm using a Garmin III+ and it sends out the RMC string once every second. This is sent along with about 6 other strings including GGA. It may be...
I'm also using a Garmin III+. I'll see if I can reproduce the problem and trace through the code to see if I can find what might be causing the issue. When...
... problem ... causing ... I can still change screens, so its not a complete program lock-up. It just seems to "loose" the GPS. ... I'll give this a try...
I haven't gotten to test this out yet, I'll be buying the parts and building a cable for my radio tomorrow though. This sounds like it is exactly what I've...
Jason, Here's another thing I'd like you to try when you get a chance. Try setting your "Quiet Timeout" to 15 seconds and see if that prevents Pic-Trak from...
A little more info on this .... When Pic-Trak decides it's time to transmit a packet, it stops listening to data comming in on the serial port. Basically it...
A few more things... I have not tested the shorter time out timer yet, but will. Until then I have a couple other questions. 1. From what I read, if the PP is...
... The last known position is not stored in the EEPROM between boots. It may use the last known position if the connection to the GPS is lost and the PicPac...
... Thanks for pointing this out. I forgot to include it in the documentation. Pic-Trak uses a relatively simply flat earth forumla to approximate distance....
Well I didn't get the full cable created like I wanted yesterday but I was able to plug it into the back of my D700 to at least listen to packets. Pic-Track...
... curious ... I was curious about this also. ... are, ... I was thinking along this way too. Somthing like a option to choose output as $GPWPL strings or...
This was the firmware I've been waiting for to buy a PIC-PAC (edit: just ordered it!). I take it by the documentation that it neither sends nor receives MIC-E?...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
