Anyone using minicom on Linux to load code to their PicPac? I am having trouble, the code does not load, it seems as if it did, but the old code is still in...
A couple of "gotchas" we windows users have to watch using HyperTerminal is making sure the file is being sent one line at a time, with at least a 100 ...
Could not use minicom. Tried about a half dozen other terminal programs and even tried HyperTerm using Wine. Nothing. Finally came across gtkTERM. It...
HI Group, After completing my Picpac assembly, I was eager to load a packet monitoring program, I located a file in the group files named "Packet.asm", after...
When you say two rows of blanks, do you mean two rows of blocks? If so, you likely didn't set the line delay in HyperTerm before you downloaded the file --...
Looks like you loaded an ascii sample source code file. What you want is an assembled 'hex' file. Loke in the FILES section for a folder names PIC-TRACK....
Hi Kevin, Yes it displays two rows of blocks. Yes to the line delay it was done as instructed after the bootloader sends the 01>. Kevin I can't get into the...
Bob... Hopefully Byon or someone else will be able to help you; your symptoms sound like mine, but I was able to get into the bootloader by connecting it to my...
Hi greg, The file was packet.asm so you are correct! I get no response whatsoever from Picpac, I suppose that the bootloader was written over. Is their a fix...
Kevin, when the PICPAC has some bad code, it will appear to be dead. At least you are getting the black lines. With power off, hold down the two black ...
hello to the group. i bought my picpac at dayton a couple of years ago. it is assembled correctly and professionally. it is in 'stock' condition with the...
Jason it is Bob here not Kevin You are correct. The Picpac answered with the 01>, I then loaded the Pic-trak it took the code. I then loaded DECODE1 as APRS...
We have written the 'C' code to break out the data from Mic-E and/or KISS packets for a TNC-to-PC project. I would like to port this code over the PIC-PAC so...
I also get two rows of blocks on the LCD; rows 2 and 4. But when looking at the serial port every thing seems fine. The Boot loads are all ok. I've tried...
The classic problem with the LCD is that you accidentally break the Resistor array when assembling.... Look at the back of the display module and measure the...
... From: picpac@yahoogroups.com [mailto:picpac@yahoogroups.com] On Behalf Of gavinandrews ... seem ... it ... Maybe you tried it, maybe not... Have you...
I am planning to run Pic-Trak Config on a Windows XP machine but have noticed that many of the system and VB files in the Pic-TrakConfig.CAB zip file are, to...
using my knowledge of windows xp it will pop up a window that says paraphrased: "the file you are copying is older than the current one would you like to keep...
Thanks Jeremiah, I have installed Pic-Trak Config successfully, thanks to your comments. Although Setup did not give me the option windows you suggested, it...
usualy i get that window. there might be an option in windows that makes it automatic glad it worked now for me its back to the MCSA college books ... -- ...
Hi Folks! Could you explane me subj? I mean can I get waypoints from PICPAC ($--WPL) and get them on my chartplotter as objects. 73 de Igor RV1CJ ... Yahoo!...
Hi all, I have been using PICPAC/Pic-Trak v.1.01 for some time now with good results, thanks to all those who have posted here. One thing that does not seem to...
Mike: Do you have a weblink for us to see what you are talking about? Thanks. Matt ... From: picpac@yahoogroups.com [mailto:picpac@yahoogroups.com] On Behalf...
Thanks Matt, No web link here, but maybe some one has a good description of how the TK page is supposed to work using PIC-Track v1.01. Regards, Mike N8ZUV ... ...
Hi, I dusted off and fired up my picpac it has pic-trak v 00.52 loaded. I down loaded from the files area v 1.01 and tried to load it on the picpac and I can...
Greetings, After reading some of the other posts I'm wondering if I've got a dead bootloader. I'm trying to help a friend set up an Igate for weather. He...
I guess I resolved my problem with the bootloader. Although I couldn't find it anywhere, setting hyperterm to Xon/Xoff for flow control seemed to do the...
Hi, I'm using a picpac to decode APRS packets using the Decode1 code from the Files section. It's doing a reasonably good job of grabbing packets, but it...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
